(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
4c. In the Changed Rate Units column, select the measurement.
4d. Click Change to change the individual seeding entry; click Change All to change
all seeding entries by the same name.
Delete the seeding operation:
4a. Click Delete.
• If there is only one operation in a file, the Delete button will be disabled.
Create a new variety:
4a. In the Changed Product Type column, select the crop.
4b. Click New. The Variety Setup tab will open.
4c. Enter new Variety data (refer to “Variety Setup” on page 54).
4d. Verify the new variety is selected in the Changed Product Name column.
4e. Click Change to change the individual seeding entry; click Change All to change
all seeding entries by the same name.
Edit the seeding details:
4a. Refer to “Edit the Operation Details” on page 134.
3. Product Application Operation (Fertilizer, Pesticide And Tank
Mixes)
While unloading the new field documentation files from the PC Card, any fertilizer,
pesticide, or tank mix product will be considered a subset of a larger operation called
Product Application.
The Seed Monitor Variable Rate (SMVR) software can handle simultaneous differing rates
of product application on each side of the implement (sprayer). However, JDOffice will
average these multiple rates and treat the sprayer as a whole unit.
Note: Because sensor data is automatically gathered, it is unique and cannot
be replaced; therefore, in order to prevent the user from losing irreplaceable
information, the Delete and Details buttons will be disabled when the
operation has sensor data, or when there are no details (rate, depth, or carrier)
to edit.
126