(Yield) Maps - StellarSupport - John Deere

125
Using the PC Card
4c. Verify the new tillage is selected in the Changed Product Name column.
4d. Click Change to change the individual tillage entry; click Change All to change
all tillage entries by the same name.
Edit the tillage details:
4a. Refer to “Edit the Operation Details” on page 134.
2. Seeding Operation
must be renamed.
When Operations is selected from the Data to Edit list, the screen
will list the operations that were used in the field (as selected on the
GreenStar Display) for that file.
If seeding was one of those operations, it will appear in the
Operations list below; the planted crop will be listed next to the
entry.
You can change the crop, delete the entry, change the variety,
create a new variety, or change the rate units. All invalid entries
Note: Because sensor data is automatically gathered, it is unique and cannot
be replaced; therefore, in order to prevent the user from losing irreplaceable
information, the Delete and Details buttons will be disabled when the
operation has sensor data, or when there are no details (rate, depth, or carrier)
to edit.
Edit the Seeding Operation:
1. In Data to Edit, select the Operations file that contains seeding.
2. In the Operations list, select the Seeding entry.
3. Click Edit.
In the Edit Entry window, you can:
Change the seeding operation:
4a. In the Changed Product Type column, select the crop.
4b. In the Changed Product Name column, select the variety.