(Yield) Maps - StellarSupport - John Deere

In the Edit Entry window, you can:
Change the machine:
123
Using the PC Card
4a. In the Changed Type column, select the new type of machine.
4b. In the Changed Machine column, select the new machine model.
4c. Click Change to change the individual machine; click Change All to change all
machines by the same name.
Delete the machine:
4a. Click Delete.
• If there is only one operation in a file, the Delete button will be disabled.
Create a new machine:
4a. In the Changed Type column, select the new type of machine.
4b. Click New. The Machine Setup tab will open.
4c. Enter the new machine data (refer to “Machine Setup” on page 66).
4d. Verify the new machine is selected in the Changed Machine column.
4e. Click Change to change the individual machine; click Change All to change all
machines by the same name.
Edit the Operations
When you select Operations from the Data to Edit list, the screen will list up to six
operations that were recorded in the data file (as selected on the GreenStar Display).
These operations are associated with a task, although they appear on this screen
separately so that they - and the task name - can be edited. There are several operations
that can be listed in this category: Seeding, Tillage, Other, and Product Application (which
includes Pesticide, Fertilizer, and Tank Mix operations).
Note: A single field documentation .gsd file cannot contain duplicate product
types for the same operation within one task. If duplicates are detected you
will receive a warning; the duplicates must be eliminated before the file can be
unloaded.
The name of the data file will be listed next to Operation in the Data to Edit list. There can