(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
If the machine either does not support an implement, or if one was not
attached, you can select None as the implement type.
Edit an Implement:
1. In Data to Edit, select Implement.
2. In the Implement list, select the implement you want to edit.
3. Click Edit.
In the Edit Entry window, you can:
Change the implement:
4a. In the Changed Type column, select the new type of equipment.
4b. In the Changed Implement column, select the new implement model.
4c. Click Change to change the individual implement; click Change All to change all
implements by the same name.
Delete the implement:
4a. Click Delete.
• If there is only one operation in a file, the Delete button will be disabled.
Create a new implement:
4a. In the Changed Type column, select the new type of equipment.
4b. Click New. The Implement Setup tab will open.
4c. Enter the new implement data (refer to “Implement Setup” on page 67).
4d. Verify the new implement model is selected in the Changed Implement column.
4e. Click Change to change the individual implement; click Change All to change all
implements by the same name.
120