(Yield) Maps - StellarSupport - John Deere

Auto Unload PC Card
109
Using the PC Card
If Setup was completed prior to working in the field and those choices were used in the
GreenStar Display, the Auto Unload feature can be used. Instead of having to select each
farm and field to unload, Auto Unload will unload all of the data on the card at once.
All data within the same field will be merged together automatically. Files will be unloaded
in units; these units are broken down by farm and field, then type of file (.gsy, .gsb, .gsd).
If multiple crops are in the same field, they will be unloaded by crop.
If there are no Undefined or Unknown selections, all of the data will automatically be
unloaded into JDOffice. If one is found, the unloading for that unit will be terminated, and
the automatic unloading for the next unit will continue. The unit that was skipped will need
to be unloaded manually by using the File>Unload PC Card command.
The Edit Data Files screen cannot be accessed using the auto unload. Use the timesaving
auto unload feature only if you are sure that the correct choices were selected on
the GreenStar Display.
Note: The auto unload command deactivates any built-in cautionary
measures (i.e. proximity warnings) within JDOffice; any defined data on the
card will be unloaded - even if it is not the correct selection.
Auto Unload the PC Card:
1. From the File menu, select Auto Unload PC Card.
2. A warning message will alert you that you are about to auto - not manually - unload
your PC Card.
• Click Yes to continue the auto unload; click No to terminate the unload.
After the unload process completes, a message will alert you to
the number of files that were unloaded - and the number that
could not be unloaded due to incomplete data. To finish
unloading the card you will have to use the File>Unload PC
Card command.