(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
3. Select Unload PC Card, or Auto Unload PC Card.
Single or Multi-Client PC Card
All single client installations will use single client PC Cards (one client per card); multiclient
installations can use either single client or multi-client formatted PC Cards (multiple
clients can be saved to an individual card).
If you use a multi-client PC Card, the individual client’s information files will be stored in a
client folder on the card.
If you use combine yield mapping, you must use a single client PC Card.
If you have data saved on a single client PC Card and try to save any data (in any form)
for another client to the same card, JDOffice will warn you that the clients don’t match. If
you select to save the new data anyway, all of the data on the PC Card will be deleted and
replaced with the new client’s data.
If you are using a multi-client card be certain you have the correct client selected on the
Unload PC Card, Save to PC Card, Unload from Archive, and Cleanup PC Card windows
before proceeding.
If you change from a single to a multi or a multi to a single card format, JDOffice will create
a xpfdata.sav folder on your hard drive. All data from the original card format will
automatically be moved to this folder.
To see all of the client’s data on a multi-client card - including the data in the xpfdata.sav
folder - uncheck the client restriction box on the Processing Preferences tab (page 38).
Note: JDOffice will reject a KeyCard (PC Card that contains embedded code
used to activate software in the field) if you try to use it as a data card.
108