(Yield) Maps - StellarSupport - John Deere

Printing Farm Maps
105
Farm Maps
To print a farm map, click Print while viewing the farm. A standard Windows
Print window will open. To adjust the paper size, paper orientation (landscape
or portrait), or the number of copies, click Properties. If you change any of the
properties, your selection(s) will stay in effect until you make the next change.
On the printed map, each field will be numbered and a corresponding name
legend will print at the top of the map. If no operational data is available, you
can print the farm map with only the field boundaries.
Next to each name in the legend will be the area of the polygon (field). This
area is determined by the field boundary; in the absence of a field boundary,
the polygon area is determined by the crop boundary. The number of acres in
the polygon may be different than the number of planted or harvested acres -
accuracy of the driven boundary will determine the margin of error.
Printing Troubleshooting
In order for your maps to print centered on the page, the printer margins should
always equal 1.5 inches (38.2 mm) collectively vertically or horizontally. For
example, if you reduce the top margin by .25”, add .25” to the bottom. The
same is true for left and right. These page margins can be changed on the
Printer Preferences tab.
If you experience a failure to print, refer to “Save Windows Printer Settings on
Exit” on page 41