(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
Farm Map Commands
These commands are also accessible through the Tools>Farm menu bar or by
right-clicking the mouse after selecting a field.
The Print button is used to print a farm map. Refer to “Printing Farm Maps” on
page 105.
The Field Information button is used to display statistical information about the
field. The information that will display in the Field Info window is contingent upon
the operations that were performed in the field, and what data is contained within
the boundary of the field.
Examples of what may be listed include: crop harvested,
seasonal year, field name, average yield in bushels per
acre, source of the boundary, area harvested in acres, or
the number of hours spent operating in the field. The crop
weight and standard payable moisture lists the calculations
that were used in the GreenStar Display; if you had
changed these numbers on the Crop Setup tab after
harvesting, these values might not match each other.
The Field Layers button opens a window that lists all of
the available layers for the selected field within your farm
(crop boundaries will not be listed).
It is only used as a reference to list the data that has been
collected up to that point; no selections can be made from
this window. Once the legend window is open, you can
select another field - the legend data will change each time
a new one is selected.
All fields on the farm map are color-coded by crop. To see
the legend for these colors, click the Crop Legend
button. Each crop in the farm will be listed.
The crop colors are part of a master legend with discreet,
pre-set values for every crop that JDOffice supports
(additional crops cannot be added). These colors can be
changed, but it is important to remember that if you edit a crop legend color, it will
affect every farm map in the program.
100