(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
Saving the Setup Data to a PC Card
Each time you click OK on any of the Setup screens, JDOffice will automatically save the
Setup information to your hard disk. This will not, however, save the changes to your
PC Card.
Every time you make changes to the Setup section, you need to save the data to your
PC Card. Doing so provides up-to-date pick lists in the GreenStar Display. A warning box
will open if you save Setup data to the hard disk and attempt to exit JDOffice without
saving it to the PC Card.
If the PC Card is unavailable, you can click No. Once the card is available, you need to
remember to manually save the information to the card, as the changes will not be visible
on the GreenStar Display until this process has been completed.
The procedure for saving Setup data is the same for single or multi client systems and PC
Cards.
Save data to the PC Card:
1. Place the PC Card in the PCMCIA card reader.
2. From the File menu, select Save to PC Card.
a. Select the client(s) whose Setup data you want to save to the PC
Card.
b. Click OK.
3. Click OK on the message that tells you that your settings have been
saved.
Note: Setup data is the only information that is saved to a PC Card
when File>Save to PC Card is selected. Report and field map data can be
saved to a card during the export process; if you want to save all of your data
to a card, you must use the Backup function.
96