Eurostar Titan Taurus Ploughing with joy - Regent

EuroStar Titan Taurus
Mounted ploughs
Semi-mounted ploughs
Ploughing
with joy

Modern plough technology cares for
high efficiency in soil cultivation.
The mounted plough EuroStar combines the advantages of a standard plough with a variable.
With a 3-5 hole working width adjustment the EuroStar will be adapted fast and simple to the
different structures of soil.
In combination with the well-tried CX-central adjustment the name EuroStar stands for high
flexibility and effectiveness in soil cultivation.
Advantages of the
EuroStar plough
technology
� Plough frame made of
alloy steel sectional tubes
with 10 mm Thickness of
the square tubing on all
models.
� EuroStar 120 without
drill holes in the frame
� CX adjustment center
with most simple plough
adjustment for
easy pulling ploughing
� Guidance of the plough
legs on both sides cares
for high stability
� Working widths
simple adjustable

Simple adjusting
for easy
pulling ploughing
� Variable first furrow width
adjustment of the first body
with the C – spindle.
� Easy adaptation to
different tractor tracks.
� No change of the traction
point because of
parallel shift.
� The traction point
adjustment with the
X – spindle cares for a
free of side pull ploughing
� With the traction point
indicator an optimal and
easy adjustment
is secured. �
(independent from the first
furrow width adjustment)
� Separate inclining angle
can be adjusted
independently on the
both sides of the plough.
� Hydraulic frame turning
draw in ram �
�
C
� �
X
Highest stability for a longer lifetime.
EuroStar – bearing technology
The perfect solution –
the CX adjustment center
Version beginning from
model EuroStar 00
�
�
�
�
� Additional strengthening of the
frame in the area of borings
� Thick spare tubing of the frame profile
all models 10 mm (alloy steel)
� The bearing pin and the bush
(through the frame) care for highest stability.
� Arresting pin for hole adjustment of
the working width outside of the frame.
Version EuroStar 1 0
Working width adjustment and
bearing pins are outside
of the frame.
�
�
�
�
Advantages of the
EuroStar bearing
technology
The bearing technology has
been taken over from the
Titan Vario models
And so also give to the
EuroStar models a
essentially longer durability.
� Only one frame boring
EuroStar 120 No single
frame boring
� Working width adjustment
is lying outside
of the frame
� Long spacing of bodies
and great working widths
possible also at the lighter
EuroStar models
� In the area of the frame
boring strengthening
plates care for a higher
stability.
� Each additional
drill hole in the
main frame
is a loss in stability

Extra-ordinary
technology for
highest demands.
At the Regent Titan Variable the wanted working width can be
adjusted hydraulically during the drive from the tractor seat,
whereby the front furrow and the traction point can be adapted automatically.
At the same time all pre-tools, disc-coulters and the depth wheel will be adjusted automatically.
Advantages of the
Titan plough technology
� The right working width
for each furrow
(small seed furrow up to
the broad autumn furrow).
� Optimal adaptation of the
working width for the
different kinds of soil
and land.
� Light ploughing of wedge
areas or obstacles.
�
Hydraulic working width
adjustment from
per plough body.

Simple adjusting for
easy pulling ploughing
� Infinitely variable first
furrow width adjustment
of the first body with the
C – spindle.
� Light adaptation to the
different tractor tracks.
� No change of the traction
point cause of the
parallel shift.
� The traction point
adjustment with the
X – spindle cares for an
ploughing free of side pull.
� With the traction point
indicator is secured an
optimal and light
adjustment (independent
from the first furrow width
adjustment)
� The inclination angle is
adjustable independent
from both plough sides.�
� Memory cylinder �
Hydr. frame turning
draw in (option)
� On cutting width change
during the work the
traction point is adjusted
automatically.
(No creeping of the draft
link resp. of the upper link
to right or left)
� Ploughing free of side pull
On each working width
The perfect solution –
the CX adjustment center
240 cm
�
�
C
X
128 cm
�
Advantages of the
Titan bearing technology
�
� Greasing bearing pin
� Through bush with
grease channel
� Thick frame profile
all models at least 10 mm
� Grease chamber with connection
to the grease channell
� In the area of frame drill hole
the frame tube inside is
additionally strengthened.
Advantages of the
Titan bearing
technology
� Greasing bearing pins,
and the through bush
secures a long durability.
� No additional drill holes
for the frame reinforcement
� Each additional drill hole
in the frame is a lost in
stability.
�
Few but therefore great
dimensioned links.

Draft link pin
cat.II and III
Ball-draft link pin
cat. III ø85 mm
Draft link connectingstrap
turning work
� Highest stability by bearing
on both sides of the pin.
Movable mounting axle
� for curve ploughing
� Reduction of the
transport width
by chamfered position.
� recommended for
on-land version.
ON-land
Version
� The tractor during ploughing
drives outside of the furrow.
� The big area of the hydraulic
adjustment allows also
ploughing with normal tyres
in the furrow and ploughing
at the end of the field.
ON-LAND
adjustment center
� Because of the special
patented detailed
technology of the REGENT
ON-LAND adjustment
centre, ploughing without
side draft is possible.
Stable bearing of the turning work
the heart of each reversible plough.
� Double acting turning ram
with automatic final position
locking valve.
� Mounting of the locking
valve at the side
(easy to maintain).
� Stable turning axle from
highest material quality.
� Turning axle not welded,
but pressed into the axle
bearing in cold state.
(ensures highest stability)
� Wide apart lying taper roller
bearing (high load capacity)
� Bearings are greased
centrally.
� Highest stability by
additional stiffening in the
interior of the headstock.
10 11

Extended acreage output by
the pro in agriculture.
The proved technology of the mounted reversible ploughs (EuroStar, Titan) in connection with a
semi-mounted chassis. Because of this combination the simple adjusting technology
also is held on the Taurus semi-mounted reversible ploughs.
� At ploughing from
6- up tzo 9-furrows
the track of the wheel
is almost entirely ploughed
by the last plough bodies.
Thereby an exact ploughing
to the end of the field
or ploughing to hindrances
is possible.
� As the transport wheel is
fitted fairly in front, less
space is needed when
turning at the end of the
field. Cutting width infinitely
variable from 33 up to 55 cm
per plough body.
� The desired cutting width
is always hydraulically set
in connection with the 1st
plough body.
�
At the same time all the
pre-cutting tools, like
skimmers and coulters, as
well as the transport wheel
are placed in the right
position.
1 1

Safety of function and stability
results in a high area performance.
�
universal joint set far in the front
and an infinitely adaptation to the
width of the tractor enable a small
turning radius
� The semi-mounted plough
is turned over two great
dimensioned hydraulic rams
actuated and free of stroke.
� A strong headstock with
great dimensioned
universal joints
� infinite cutting width
adjustment of the first body
� No tollerance of the
traction point due to the
parallel shifting.
� The anlge of inclination is
adjustable independent of
both plough sides.
� infinite working depth
adjustment
1 1

The mechanic
stone safety device
� Simple adjustment of the
releasing pressure over
the check screw.
� Stone safety device
elements hanged in front
are pressed into the
bearing during ploughing
� The four supporting points
allow a knock free release,
and a quick and powerful
re-penetration of the body.
� Big clearance towards the
top and side-wards.
� Pre-working tools are
removed automatically
with the plough bodies.
System
mechanic
Power at the share top in kg
(at middle spring pressure)
View of the power flow during the release
of the Regent mechanic
non-stop stone safety device
00
00
00
00
000
1 00
1 00
1 00
1 00
1000
00
00
00
Mechanic and hydraulic
non-stop stone safety device
for ploughing on stony soils.
non-stop
max. releasing pressure of the spring
Works adjustment
All plough models
EuroStar / Titan / Taurus
can be equipped with the
“non-stop system”
System
mydraulic
Additional advantages
of the hydraulic stone
safety device system
� Releasing pressure
adjustable from 50 bar up
to 180 bar from the tractor.
� Can be locked
on very hard grounds.
� The pressure can always
be checked from the tractor
by means of a monometer.
� Safety device element
can remove in all directions
(also bevel).
� No side force on the
plough beams.
� Highest durability through
course of force to the
smallest resistance.
� Guidance of plough beam
on both sides –
high stability.
� The bow shape of the
plough beam brings a
favourable position of centre
of gravity
� Shearing screws serve for
the additional safety.
00
Hub height
0
1 0 10 1 1 1 1 0 0 cm
1

Quality of material for highest demands
and for a longer lifetime
Through the use of recent base material (depending on the mouldboard) and the special hardening method
it was able to reach a relevant higher resistance in abrasion.
A total hardening enables an increase of the durability of 20 %. Hardness in abrasion zones and elastic concerning pushing
encumbrances that‘s the new result of the new heat and material treatment of Regent.
Best quality for highest
demands
Experience of many years in
development and production ensure
an easy pulling mouldboard.
The mouldboard
of Regent
The mouldboards are now
hardened all over the cross
section and reach the best
durabilities for the hardest use
through their special form.
The slatted body
of Regent
The slatted bodies have a
breadth of 12 mm and are all
over hardened and so very
wear resistant.
front parts of the
mouldboards
� sserially with carbide-plating
(for a significant higher durability)
� continuous through the
whole mouldboard height
1 1

DG 774
SN
S
DW-S
SW-S
SW-X
Universal share divided (series)
(option with armour plating)
Beak share for high stability
and long lifetime
self sharpening
(series)
Flat share for
extreme stony ground
Universal share with
reversible point, very good
with reversible point DWS
(option)
For hard and dry soils,
for extreme use with reversible
point SWS
(option)
For extreme use
with reversible great
point XWS
(option)
Disc-coulter
with locking disc
plain ø 10, ø 0, ø 00 mm
notched ø 10, ø 0, ø 00 mm
Disc-coulter
Springed
wide furrow cutter
Subsoil decompactor V 0 with
exchangeable spike
Guide plate
For stony and level soils.
(cost-favourable in alternative
to the skimmer)
Wing coulter can be used
instead of a disc coulter.
maize straw skimmer
for many crop residues
(straw, catch crop)
from light to heavy soils, very
universal use possible
skimmer AM
for crop residues
(stubble field, maize)
fro sticky soils
skimmer F
for greenland
from light to heavy soils
skimmer BV 27
special skimmer for extreme
working depths and
for very dry soils (e.g. Italy)
Dual depth wheel steel
ø 00 x 1 mm
or ø 10 x 1 mm
Pendulum depth wheel
with middle console
with rubber tyre and hydr.
ø 10 x 0 mm
or ø 0 x 0 mm
Combi transport and
depth wheel on middle console
with rubber tyre and hydr.
ø 10 x 0 mm
or ø 00 x 0 mm
0 1
Regent plough body often copied never reached.
Neu
W4
WS 7
W 7
WS 9
MK
SKL 5B
SK 6
SKT 6
SKT 65
SKK 6
Universal body �
middle up to heavy soils �
very good crumbling �
working depth up to cm �
W4 ( - , - , - )
very easy pulling �
good wide track cleaning �
for flat ploughing �
whole turning of the earth beam �
also with high speed
very good for steep slope �
WS 7 ( - , - 0, - )
W 7 ( - )
middle up to heavy �
loamy soils
very easy pulling �
good track cleaning �
good crumbling effect �
good for steep slope �
WS 9
easy, sandy, �
dry up to
loamy soils
MK 26 (M - )
MK 28 (M - , M - )
universal useable �
humus substantial �
heavy tacky and
loamy soils
very wide track cleaning �
good for steep slope �
SKL 5 / SKL 4
SKL 5B
extremely tacky soil �
recommendable for great depth �
good turning and crumbling effect �
deliverable with plastic �
mouldboard edge (SKK)
SK 6 / SKT 6 / SKT 65 / SKK 6
Perfection
into detail

Eurostar
E 1 0 100x1 0 | 100 | | 1 | 0
E 00 0 10 0 1 0x1 0 100 | | 0 | | 0 0
E 00 0 11 0 1 0 1 0x1 0 100 | | 0 | | 0
E 00 1 0 1 0 1 0x1 0 10 | | | |
E 00 1 1 0 0 1 0x1 0 100 | 1 | | |
E 00 1 0 1 0 1 0x1 0 10 | | | 1 |
non-stop
E 1 0 NS 0 11 0 100x1 0 | 100 | | | 0
E 00 NS 1 0 1 1 0x1 0 | 100 | | | |
E 00 NS 1 0 0 1 0x1 0 100 | 1 | | |
M 00 NS 0 0 0 1 0x1 0 1 | | | 10 1 | | |
Titan
T 11 0 1 0x1 0 10 - 1
T 1 0 11 0 100x1 0 0 - 0 0
T 1 0 0 1 0 1 0 1 0x1 0 0 | 100 | 10 -
T 1 0 10 0 1 0 1 0 1 0x1 0 100 | 10 -
T 1 11 0 1 0 1 0x1 0 11 - 0
T 1 0 1 0 1 0 1 0x1 0 10 - 1
T 1 0 1 0 1 0 1 0 0 1 0x1 0 100 | 10 | 11 - 0
T 00 11 0 1 0 1 0 00 00x1 0 100 | 10 | 11 - | -
non-stop
T 1 0 NS 1 0 1 0 0 1 0x1 0 | 0 | 100 - 0 0
T 1 0 NS 1 0 1 0 0 0 1 0x1 0 100 | 10 - 0
T 1 NS 1 1 1 0x1 0 11 -
T 1 0 NS 1 0 00 00 1 0x1 0 100 | 10 - 0
T 00 NS 1 0 00 0 00x1 0 100 | 10 - 0
Taurus
T 1 0 00 10 1 0x1 0 100 -
T 00 0 0 0 0 0 00x1 0 100 | 10 | 11 - | - 0 1
non-stop
Shares / weight kg
Technical data
kg
Frame
dimension
mm
T 00 NS 0 0 0 00 00x1 0 100 | 10 - 0 | - - 0
Weight c. kg – each after plough body and spacing of bodies without additional equipment.
We reserve the right for misprints and to make technical changes.
Spacing of
bodies
cm
Working
width
cm
Framework
height
cm
kW 1 1 10 110 11 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 1 1 0 0 0 0 1
HP 0 0 0 100 110 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 00 10 0 0 0 0 0 0 0 0 00 10 0 0 0 0 0 0 0 0 00 10 0 0
-)))
-)))) E 1 0
-)))
-)))
-)))
-)))) E 00
-))))
-))) T 11
-)))
-))))
-)))
-)))
-))))
-)))) E 1 0 NS
-))))
-)))) T 1 0
-)))
-)))
The right plough
for each performance.
-))))
-)))
-))))) E 00
-))))
-))))) T 1 0
-))))
-)))) T 1
-))))
-)))
-))))
-))) -))))
-))))
-))))
-))))) E 00
-))))) E 00 NS
-))))
-)))) T 1
-)))))
-))))) T 1 0
-))))) T 1 0
-)))))
-)))))
-))))) T 1 0 NS
-))))
-)))))
-)))))
-)))))
-)))))
-))))) T 1 0 NS
-)))))
-))))))
-))))) -))))))
-))))))
-)))))) E 00
-))))))) T 1 0
-)))))))
-)))))))
-)))))) T 1 0
-)))))) T 00
-)))))) E 00
-)))))) E 00 NS
-)))))) M 00 NS
kW 1 1 10 110 11 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 1 1 0 0 0 0 1
HP 0 0 0 100 110 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 00 10 0 0 0 0 0 0 0 0 00 10 0 0 0 0 0 0 0 0 00 10 0 0
-)))))) T 1 0 NS
-)))))) T 00 NS
kW 1 1 10 110 11 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 1 1 0 0 0 0 1
HP 0 0 0 100 110 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 00 10 0 0 0 0 0 0 0 0 00 10 0 0 0 0 0 0 0 0 00 10 0 0
-))))))))
-))))))))
-))))))))) T 00
-))))))))) Taurus 00 NS
Types and power
requirement tab

Plough technique
which rules the field.
www.regent.at
Regent Pflugfabrik GmbH
Bahnhofstr. 10
A- 00 Attnang-Puchheim
Tel. + (0) / 1
Fax. + (0) / 0
verkauf@regent.at 1/0
11 En