780S Dispense Valve Maintenance & Parts Guide - Nordson EFD
780S Dispense Valve Maintenance & Parts Guide - Nordson EFD
780S Dispense Valve Maintenance & Parts Guide - Nordson EFD
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Valve</strong> Disassembly and<br />
Reassembly Procedures<br />
CAUTION: To prevent damage, the valve<br />
must be disassembled starting at the fluid<br />
outlet end of the valve.<br />
<strong>Valve</strong> maintenance<br />
To thoroughly clean the fluid body and<br />
replace needle packings:<br />
1. Remove needle stroke control knob<br />
and spring.<br />
2. Remove air cap retainer, then air<br />
cap, nozzle and fittings.<br />
3. Remove fluid body from air cylinder<br />
body turning counterclockwise until<br />
free. Then remove O-ring.<br />
4. Clean fluid body, air cap and nozzle<br />
in appropriate solvent.<br />
2<br />
Nozzle air<br />
cap retainer<br />
#7819SS<br />
(stainless steel)<br />
Fluid inlet fitting<br />
#7543BP - for .25" OD tube<br />
#7610BP - for .375" OD tube<br />
Nozzle O-ring<br />
(Viton)<br />
#7825<br />
4<br />
3<br />
Nozzle/air cap<br />
Round Fan<br />
#7857-46SS #7857F-46SS<br />
#7857-28SS #7857F-28SS<br />
#7857-14SS #7857F-14SS<br />
#7857-46WA-SS #7857-46WF-SS<br />
5<br />
O-ring<br />
(Buna-N)<br />
#4049<br />
Needle<br />
packing<br />
assembly<br />
#7810<br />
Fluid body<br />
#7812-SS (stainless steel)<br />
#7812 (hard-coated aluminum)<br />
5. Use extraction tool #7803<br />
to remove needle packings<br />
from fluid body.<br />
6. Remove any remaining packings<br />
and spring from needle.<br />
Note: Before reassembling,<br />
clean fluid body, air cap and<br />
nozzle in appropriate solvent and<br />
replace O-ring. Clean needle with<br />
cloth dampened in solvent.<br />
Reassemble the valve in reverse<br />
order of disassembly. Ensure that<br />
the small O-ring and washer on<br />
the bottom of the air cylinder body<br />
are back in place before reinstalling<br />
the packing spring. Lubricate parts<br />
indicated with Nye Lubricant #865<br />
included in the <strong>Maintenance</strong> Kit.<br />
Packing<br />
spring<br />
#7808<br />
Retaining<br />
washer #7807<br />
Air cylinder body<br />
#7811-SS<br />
(stainless steel)<br />
#7811<br />
(hard-coated aluminum)<br />
11<br />
O-ring (Buna-N)<br />
#7806<br />
www.efd-inc.com info@efd-inc.com USA & Canada 800-556-3484 Europe +44 (0) 1582 666334 Asia +86 (21) 5854 2345<br />
Sales and service of <strong>EFD</strong> dispensing systems are available worldwide.