Application Form CONTENTS - Environmental Protection Agency

Application Form CONTENTS - Environmental Protection Agency Application Form CONTENTS - Environmental Protection Agency

14.01.2013 Views

Emission Point Ref. N o : A2-4 IPPC Application Form Source of Emission: Secondary Kiln Exit Location : Factory: Decoration Department Grid Ref. (12 digit, 6E,6N): E322910 N171610 Vent Details Diameter: Height above Ground(m): 0.65m 9.8 Date of commencement: January 2005 Characteristics of Emission : (i) Volume to be emitted: Average/day 88,800 m 3 /d Maximum/day m 3 /d Maximum rate/hour 3,700 m 3 /h Min efflux velocity 3.1 m.sec -1 (ii) Other factors Temperature For Combustion Sources: o C(max) o C(min) 142 o C(avg) For inspection purposes only. Consent of copyright owner required for any other use. Volume terms expressed as : � wet. � dry. ________%O2 (iii) Period or periods during which emissions are made, or are to be made, including daily or seasonal variations (start-up /shutdown to be included): Periods of Emission (avg) 24 hr/day (as required) 365 day/yr (with exception of shutdown for say routine maintenance – refer Attachment C ) Application Form.doc Page 44 of 91 EPA Export 21-04-2007:02:16:27

IPPC Application Form TABLE E.1(iii): MAIN EMISSIONS TO ATMOSPHERE - Chemical characteristics of the emission (1 table per emission point) Emission Point Reference Number: A2-4 Parameter Prior to treatment (1) Brief As discharged (1) mg/Nm 3 kg/h description mg/Nm 3 kg/h. kg/year Avg Max Avg Max of treatment Avg Max Avg Max Avg Max NOx 25 0.093 810 SO2 1 0.004 32 Particulates 75 0.278 2431 VOCs No Treatment 178 0.659 5769 HCl 31 0.115 1005 HF Application Form.doc Page 45 of 91 1 0.004 32 1. Concentrations should be based on Normal conditions of temperature and pressure, (i.e. 0 o C,101.3kPa). Wet/dry should be the same as given in Table E.1(ii) unless clearly stated otherwise. For inspection purposes only. Consent of copyright owner required for any other use. EPA Export 21-04-2007:02:16:27

Emission Point Ref. N o : A2-4<br />

IPPC <strong>Application</strong> <strong>Form</strong><br />

Source of Emission: Secondary Kiln Exit<br />

Location : Factory: Decoration Department<br />

Grid Ref. (12 digit, 6E,6N): E322910 N171610<br />

Vent Details<br />

Diameter:<br />

Height above Ground(m):<br />

0.65m<br />

9.8<br />

Date of commencement: January 2005<br />

Characteristics of Emission :<br />

(i) Volume to be emitted:<br />

Average/day 88,800 m 3 /d Maximum/day m 3 /d<br />

Maximum rate/hour 3,700 m 3 /h Min efflux velocity 3.1 m.sec -1<br />

(ii) Other factors<br />

Temperature<br />

For Combustion Sources:<br />

o C(max) o C(min) 142 o C(avg)<br />

For inspection purposes only.<br />

Consent of copyright owner required for any other use.<br />

Volume terms expressed as : � wet. � dry. ________%O2<br />

(iii) Period or periods during which emissions are made, or are to be made, including daily or<br />

seasonal variations (start-up /shutdown to be included):<br />

Periods of Emission (avg) 24 hr/day (as required) 365 day/yr<br />

(with exception of shutdown for say routine<br />

maintenance – refer Attachment C )<br />

<strong>Application</strong> <strong>Form</strong>.doc Page 44 of 91<br />

EPA Export 21-04-2007:02:16:27

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!