Arch Deco - Roadrunner Glass

Ceramic
Frit
Silk-screening a ceramic frit
based ink onto the glass
and then permanently firing
the ceramic frit onto the
glass surface by either the
heat strengthening or tempering
process produces
these patterns. This method
is a lower cost alternative
for higher volume projects
that require the same decorated
pattern. Custom
designs, patterns and colors
are also available but
require an additional
approval process. By utilizing
many of the different
solar control glass products
greatly enhances energy
efficiencies. The end product
is permanent and very
easy to maintain.
24
Other Custom Patterns
1/16” Lines, 3/16” on Center 1/2” Lines, 1” on Center
Beige Frit on Evergreen Glass
3/4” Dots, 1 1/2” on Center
1/8” Dots, 1/4” on Center
on Evergreen Glass
3/4” Dots, 1 1/2” on Center
Blue Frit on Reflective Glass
1/8” Dots, on Blue Green Glass
3/8” Squares, 5/8” on Center
1/4” Dots, 3/8” on Center
Custom Blue Diamond