13.01.2013 Views

Wireless Home Networking - Index of

Wireless Home Networking - Index of

Wireless Home Networking - Index of

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Figure 9-2:<br />

Setting<br />

up WPA<br />

using the<br />

Windows<br />

XP <strong>Wireless</strong><br />

Zero<br />

Configuration.<br />

s<strong>of</strong>tware shows just the passphrase; you need to find the Network<br />

Equivalent Password in the Airport Admin Utility to display the WEP<br />

key — in OS X, this is in the Base Station menu.)<br />

For WEP, the built-in wireless LAN client s<strong>of</strong>tware in Windows XP numbers<br />

its four keys from 0–3 rather than 1–4. So, if you’re using Key 1 on<br />

your access point, select Key 0 in Windows XP.<br />

6. Click OK to close the WPA or WEP configuration window.<br />

You have finished turning on WPA or WEP. Congratulations.<br />

Can we repeat ourselves again? Will you indulge us? The preceding steps are<br />

very generic. Yours may vary slightly (or, in rare cases, significantly). Read<br />

your user’s guide. It tells you what to do.<br />

After you configure WPA or WEP on the access point, you must go to each<br />

computer on your network, get into the network adapter’s client s<strong>of</strong>tware (as<br />

we describe in Chapters 7 and 8), turn on WEP, and enter the passphrase or<br />

the WEP key. Typically, you find an Enable Security dialog box containing a<br />

check box to turn on security and one to four text boxes for entering the key.<br />

Simply select the check box to enable WEP, enter your key in the appropriate<br />

text box, and then click OK. Figure 9-2 shows this process using Windows XP<br />

and its built-in <strong>Wireless</strong> Zero Configuration client.<br />

Closing your network<br />

Chapter 9: Securing Your <strong>Wireless</strong> <strong>Home</strong> Network<br />

The last step we recommend that you take in the process <strong>of</strong> securing your<br />

wireless home network (if your access point allows it) is to create a closed<br />

network — a network that allows only specific, predesignated computers and<br />

devices onto it. You can do two things to close down your network, which<br />

makes it harder for strangers to find your network and gain access to it:<br />

� Turn <strong>of</strong>f SSID broadcast: By default, most access points broadcast their<br />

SSID out onto the airwaves. This makes it easier for users to find the network<br />

and associate with it. If the SSID is being broadcast and you’re in<br />

173

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!