EGO Natural StONE PrOductS High-Quality Products and ...
EGO Natural StONE PrOductS High-Quality Products and ...
EGO Natural StONE PrOductS High-Quality Products and ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EGO</strong> <strong>Natural</strong> <strong>StONE</strong> <strong>PrOductS</strong><br />
<strong>High</strong>-<strong>Quality</strong> <strong>Products</strong> <strong>and</strong> accessories<br />
for the <strong>Natural</strong> Stone Professional
<strong>EGO</strong> dicHtStOffwErkE<br />
2<br />
1947<br />
Foundation of the company by Ewald Goldmann<br />
Fifties<br />
Development of a national distribution network<br />
1963<br />
Elsedore Goldmann takes over the management<br />
of <strong>EGO</strong> Dichtstoffwerke<br />
Sixties<br />
Construction of the production plant for<br />
silicone sealants<br />
Seventies<br />
Start of butyl tape production<br />
1975-1983<br />
Construction of licensed production plants<br />
1983<br />
Chartered engineer Ewald Goldmann jun. <strong>and</strong><br />
business school graduate Heinz Ohm take over<br />
the business manangement<br />
1983<br />
Takeover of the company Conloc<br />
1985<br />
Market introduction of the new glass-bonding<br />
technology<br />
1999<br />
Foundation of the distribution centre<br />
Stein/Nuremberg<br />
without History there is no future<br />
In the beginning there was the chalk – this could be the title of<br />
the <strong>EGO</strong> Dichtstoffwerke company history. In fact, the 400 year<br />
old chalk mountain in Garmisch-Partenkirchen is inseparably<br />
linked with <strong>EGO</strong>. Since its establishment in 1947 the company<br />
has obtained this valuable raw material from Upper Bavaria,<br />
<strong>and</strong> the company’s founder, Ewald Goldmann, laid the foundation<br />
stone for <strong>EGO</strong>’s present success by starting his putty<br />
production.<br />
During the post-war period putty is a dem<strong>and</strong>ed material for<br />
trade <strong>and</strong> h<strong>and</strong>icraft. New, revolutionary application equipment<br />
extends the product range <strong>and</strong> makes our company more <strong>and</strong><br />
more popular. In the fifties a national distribution network is<br />
built <strong>and</strong> <strong>EGO</strong> products are even shipped Europe-wide. After the<br />
early death of Ewald Goldmann in 1963 his wife Elsedore takes<br />
over the management of the company. Still within the sixties<br />
she initiates the construction of a most modern production<br />
plant for silicone sealants <strong>and</strong> in the seventies another one for<br />
the nowadays highly dem<strong>and</strong>ed buty tapes. The first factories<br />
are established abroad under licence of <strong>EGO</strong>. In the eighties<br />
main investments are devoted to the field of adhesives. The<br />
company develops a highly innovative glass-bonding technology<br />
that was enthusiastically accepted by the market. Since<br />
1983 Ewald Goldmann (jun.) <strong>and</strong> Heinz Ohm have shared the<br />
company management. By the way: The chalk is still used today<br />
as a high quality filler for the modern <strong>EGO</strong> sealants.<br />
www.ego.de
Behind high-class Performances there are<br />
always committed People<br />
The membership <strong>and</strong> cooperation of <strong>EGO</strong> in many important<br />
bodies <strong>and</strong> institutions of our branch have a long tradition.<br />
Due to these connections <strong>EGO</strong> took part, among other things,<br />
in the st<strong>and</strong>ardization of technologies that are still used today<br />
in many processing branches. For our customers this commitment<br />
guarantees products which meet the requirements of<br />
modern sealing <strong>and</strong> adhesive technology <strong>and</strong> offer maximum<br />
safety during processing.<br />
The high quality st<strong>and</strong>ard of <strong>EGO</strong> products is confirmed by<br />
several independent certificates <strong>and</strong> reports. Already the first<br />
<strong>EGO</strong> sealants were tested <strong>and</strong> admitted by several national<br />
<strong>and</strong> international institutes according to all existing st<strong>and</strong>ards<br />
<strong>and</strong> state-of-the-art technology. Permanent surveillance by<br />
independent institutes ensures continuity. In 1997 the company<br />
achieved certification according to DIN ISO 9001 by the TÜV<br />
Management Service Ltd. Our customers are used to quality<br />
<strong>and</strong> reliability. Our most important performance for you is <strong>and</strong><br />
will remain the solution of problems at the highest level.<br />
<strong>EGO</strong> is a member of the following bodies <strong>and</strong> committees:<br />
• NA - Bau im Deutschen Institut<br />
für Normung (DIN), Berlin<br />
• IVD - Industrie Verb<strong>and</strong> Dichtstoffe<br />
e. V. Düsseldorf<br />
• IFT, Institut für Fenstertechnik, Rosenheim<br />
• IBK - Institut für Bauen mit Kunststoffen,<br />
Darmstadt<br />
• BIV - Bundesinnungsverb<strong>and</strong> des deutschen<br />
Glaserh<strong>and</strong>werks (technical advisor),<br />
Hadamar<br />
• SFJF - Syndicat Français des Joints et Façades,<br />
Paris<br />
etc.<br />
<strong>EGO</strong> dicHtStOffwErkE<br />
3
PrOduct raNGE <strong>Natural</strong> <strong>StONE</strong> <strong>PrOductS</strong><br />
<strong>EGO</strong>POlYEStEr<br />
products are two-component adhesives for applications<br />
with natural stomes <strong>and</strong> for the stone-processing industry.<br />
These products have optimized viscosity, processing <strong>and</strong><br />
curing time. They are simple to apply due to the user-friendly<br />
packaging <strong>and</strong> easy to mix with <strong>EGO</strong> Curing Agent.<br />
<strong>EGO</strong> cOlOur PaStE<br />
For colouring <strong>EGO</strong>POLYESTER <strong>and</strong> <strong>EGO</strong>POXID.<br />
<strong>EGO</strong>POlYEStEr transparent liquid<br />
Filling of plug holes <strong>and</strong> small cracks, bonding of natural<br />
stones.<br />
<strong>EGO</strong>POlYEStEr transparent filler<br />
For fast repairs, bonding on vertical surfaces <strong>and</strong> bonding<br />
of fractures.<br />
<strong>EGO</strong>POlYEStEr colourit liquid<br />
For rapid bonding in interior work.<br />
<strong>EGO</strong>POlYEStEr colourit filler<br />
For vertical <strong>and</strong> horizontal applications. For modelling<br />
edges <strong>and</strong> profiles in interior work.<br />
<strong>EGO</strong>POlYEStEr HardENEr<br />
Curing agent for polyester.<br />
<strong>EGO</strong>POlYEStEr dübel Sprint<br />
Polyester mortar for fixing canopy roofs, railings, steps,<br />
monuments etc. as well as connecting installations.<br />
EPOXY rESiN adHESiVES<br />
The EPOXY range of adhesives was developed especially for<br />
use with all types of natural stones. After careful analysis<br />
system solutions have been developed especially for this<br />
sector, <strong>and</strong> their easy h<strong>and</strong>ling makes them ideally suited<br />
for the natural stone industry.<br />
By adding two-chamber cartridges <strong>and</strong> fitting mixing tubes<br />
a system has been created that is both practical <strong>and</strong> userfriendly.<br />
The appropriate dispensers (h<strong>and</strong> or air-pressure<br />
guns) make dosage easy, mixing simple <strong>and</strong> the application<br />
of the adhesives effortless.<br />
<strong>EGO</strong>POXid 2000 rapid<br />
For dowelling bronze letters as well as for the rapid bonding<br />
of a wide variety of different materials. Ideal for interior <strong>and</strong><br />
exterior horizontal <strong>and</strong> vertical bonding.<br />
<strong>EGO</strong>POXid 2100 transparent liquid<br />
For bonding artificial stone, filling of plug holes <strong>and</strong> repair<br />
of natural stones.<br />
<strong>EGO</strong>POXid 2100 transparent filler<br />
For visual <strong>and</strong> structural bonding both indoors <strong>and</strong> outdoors,<br />
for bonding natural stone as well as other materials.<br />
<strong>EGO</strong>POXid 2200 corundum<br />
For producing simple <strong>and</strong> safe non-slip edges <strong>and</strong> anti-skid<br />
profiles.<br />
<strong>EGO</strong>POXid 2400<br />
For jointing wall <strong>and</strong> floor coverings such as ceramic tiles,<br />
natural stone, artificial stone, marble, stoneware, clinker,<br />
concrete, floor pavements,fibre cement, wood chip,<br />
metal etc.<br />
<strong>EGO</strong>POXid 2800 injection resin<br />
For filling cracks in concrete <strong>and</strong> floor pavements.<br />
4<br />
<strong>EGO</strong> POlYurEtHaNES<br />
The <strong>EGO</strong>FLEX product range provides further applications<br />
with natural stones. 1-component adhesives <strong>and</strong> sealants<br />
are available. Some of the advantages these products offer<br />
include fast cure <strong>and</strong> that they can be ground <strong>and</strong> painted.<br />
<strong>EGO</strong>FLEX products are resistant to ageing <strong>and</strong> weathering.<br />
<strong>EGO</strong>flEX 411<br />
1-component polyurethane sealant <strong>and</strong> adhesive for internal<br />
<strong>and</strong> external use such as bonding natural stone steps<br />
to steel constructions. Egoflex 411 provides bonds that<br />
withst<strong>and</strong> dynamic loads.<br />
<strong>EGO</strong>flEX 441<br />
1-component flexible adhesive for internal applications.<br />
For fast bonding <strong>and</strong> fixing of natural <strong>and</strong> artificial stone on<br />
various substrates.<br />
<strong>EGO</strong>SilicONES<br />
<strong>EGO</strong> silicones were especially developed for durable sealing<br />
of connecting <strong>and</strong> expansion joints for all types of natural<br />
stones.<br />
<strong>EGO</strong>SilicON 351 Stone<br />
does not contain plasticizers <strong>and</strong> is compatible with stone.<br />
<strong>EGO</strong>SILICONE 351 Stone is available in many colours <strong>and</strong><br />
features excellent workability.<br />
<strong>EGO</strong>SILICON 352 Effect<br />
Special silicone sealant with structured optical effect for<br />
joints with optimum fit or decorative contrast joints. Ideal<br />
for all applications in conjuction with natural <strong>and</strong> artificial<br />
stones. <strong>EGO</strong>SILICONE 352 Effect is free from plasticizers,<br />
compatible with stone <strong>and</strong> available in an extensive range<br />
of colours.<br />
accESSOriES<br />
tooling agents <strong>and</strong> cleaning agents<br />
Mixing tube Nozzles<br />
<strong>EGO</strong>POXid 2-component Guns<br />
adhesive tapes
<strong>EGO</strong> colour Paste<br />
for <strong>EGO</strong>POLYESTER <strong>and</strong> <strong>EGO</strong>POXID<br />
<strong>EGO</strong>POlYEStEr transparent liquid<br />
• Low viscosity<br />
• Spreadable<br />
• Grindable<br />
<strong>EGO</strong>POlYEStEr transparent filler<br />
<strong>EGO</strong> colour Paste<br />
Colour<br />
100 g bottle<br />
Article No.<br />
Blue 574044000<br />
Brown 574046000<br />
Yellow 574043500<br />
Red 574043000<br />
Black 574048000<br />
White 574041000<br />
<strong>EGO</strong>POlYEStEr transparent filler<br />
<strong>EGO</strong>POlYEStEr<br />
• Fast cure <strong>EGO</strong>POLYESTER Transparent Liquid is a low-viscosity, spreadable<br />
adhesive for filling plug holes <strong>and</strong> fine cracks, <strong>and</strong> for<br />
bonding natural stones, in particular fractures <strong>and</strong> cracks.<br />
It is ideally suited for GFR reinforcements (fixings) <strong>and</strong> st<strong>and</strong>ard<br />
applications. Also suited for outdoor applications <strong>and</strong> bonding<br />
of different materials.<br />
<strong>EGO</strong>POLYESTER Hardener is indispensable for the<br />
application.<br />
For 100 g Egopolyester use approx. 1-4 g hardener.<br />
• Low viscosity<br />
• Spreadable<br />
• Grindable<br />
<strong>EGO</strong> COLOUR PASTES are high-quality, non-fading, concentrated<br />
pigment pastes that are compatible with most polyester-<br />
<strong>and</strong> epoxy-resins. <strong>EGO</strong> Colour Paste is available in 6 st<strong>and</strong>ard<br />
colours that can also be mixed among themselves providing<br />
optimum colouring of our <strong>EGO</strong>POXID <strong>and</strong> <strong>EGO</strong>POLYESTER<br />
products.<br />
<strong>EGO</strong>POlYEStEr transparent liquid<br />
900 ml can 4500 ml bucket<br />
6 pcs/carton 1 pcs<br />
Colour<br />
Article No. Article No.<br />
Honey-transparent 573290300 573870002<br />
900 ml can 4500 ml bucket<br />
6 pcs/carton 1 pcs<br />
Colour<br />
Article No. Article No.<br />
Honey-transparent 573810000 573720300<br />
• Fast cure <strong>EGO</strong>POLYESTER Transparent Filler is a pasty, non-sagging,<br />
transparent adhesive with a thixotropy that makes it particularly<br />
suited for thin vertical <strong>and</strong> horizontal bonding joints.<br />
For bonding fractures, for high-quality optical/structural bonding<br />
of natural stones with surface transparency as well as for<br />
outdoor applications <strong>and</strong> bonding of different materials.<br />
<strong>EGO</strong>POLYESTER Hardener is indispensable for the<br />
application.<br />
For 100 g Egopolyester use approx. 1-4 g hardener.<br />
5
<strong>EGO</strong>POlYEStEr<br />
6<br />
<strong>EGO</strong>POlYEStEr colourit liquid<br />
<strong>EGO</strong>POlYEStEr colourit filler<br />
<strong>EGO</strong>POlYEStEr Hardener<br />
• Low viscosity<br />
• Spreadable<br />
• Grindable<br />
• Fast cure<br />
<strong>EGO</strong>POlYEStEr colourit liquid<br />
1000 ml can 4500 ml bucket<br />
6 pcs/carton 1 pcs<br />
Colour<br />
Article No. Article No.<br />
S<strong>and</strong>grey 573780001 573870001<br />
<strong>EGO</strong>POLYESTER Colourit Liquid is a low-viscosity, spreadable,<br />
non-pigmented adhesive for filling plug holes <strong>and</strong> fine cracks,<br />
<strong>and</strong> for bonding natural stones without surface transparency.<br />
It is also suited for structural applications <strong>and</strong> for bonding different<br />
materials in combination with natural stones.<br />
<strong>EGO</strong>POLYESTER Hardener is indispensable for the<br />
application.<br />
For 100 g Egopolyester use approx. 1-4 g hardener.<br />
<strong>EGO</strong>POlYEStEr colourit filler<br />
1000 ml can 4500 ml bucket<br />
6 pcs/carton 1 pcs<br />
Colour<br />
Article No. Article No.<br />
S<strong>and</strong>grey 573780002 573870000<br />
<strong>EGO</strong>POLYESTER Colourit Filler is a pasty, non-sagging, non-pigmented<br />
adhesive. Its creamy consistency makes it particularly<br />
suited for thin vertical <strong>and</strong> horizontal bonding joints. For bonding<br />
of natural stones without surface transparency, especially<br />
suited for use on vertical surfaces.<br />
It is also suited for structural applications <strong>and</strong> for bonding different<br />
materials in combination with natural stones.<br />
<strong>EGO</strong>POLYESTER Hardener is indispensable for the<br />
application.<br />
For 100 g Egopolyester use approx. 2 g hardener.<br />
<strong>EGO</strong>POlYEStEr Hardener 1 pcs<br />
50 g tube 200 g tube<br />
Colour<br />
Article No. Article No.<br />
White 573630310 573650310<br />
Curing agent for polyester.
dübel Sprint<br />
<strong>EGO</strong>POLYESTER<br />
dübel Sprint Sample kit<br />
Mixing tube<br />
application gun<br />
<strong>EGO</strong>VINYLESTER<br />
Screen Sockets<br />
Blow-out device<br />
dübel Sprint Sample kit<br />
dübel Sprint accessories<br />
<strong>EGO</strong>POlYEStEr<br />
dübel Sprint<br />
<strong>EGO</strong>POLYESTER <strong>EGO</strong>VINYLESTER<br />
Incl. mixing tube Incl. mixing tube<br />
380 ml Styrene-free 280 ml<br />
Colour<br />
Article No. Article No.<br />
Grey 573870008 573870010<br />
The two components, consisting of resin <strong>and</strong> curing agent, are<br />
supplied in a two-chamber cartridge. By using an application<br />
gun both components are mixed in a screwed-on static mixer<br />
forming a high-performance mortar that is then squeezed into<br />
the drill hole for fixation.<br />
Fixation of e.g. roof canopies, railings, steps, monuments,<br />
fountains, window grates <strong>and</strong> machines. Fixation of connecting<br />
installations such as steel reinforcements, profiles, anchor<br />
bars, grids etc.<br />
Article Article No.<br />
Dübel Sprint Sample Kit 573870009<br />
The Dübel Sprint Sample Kit contains the following items:<br />
3 Dübel Sprint incl. mixing tubes<br />
1 Application gun for Dübel Sprint<br />
2 Cleaning brushes (thick <strong>and</strong> thin)<br />
3 Mixing tubes for Dübel Sprint<br />
1 Blow-out device for Dübel Sprint<br />
10 Screen sockets in various sizes<br />
Article Article No.<br />
Mixing tube for Dübel Sprint 570000008<br />
Application gun for Dübel Sprint 570000911<br />
Air-pressure gun for Dübel Sprint 570000913<br />
Plastic screen socket 15 x 130 mm 570003100<br />
Plastic screen socket 15 x 85 mm 570003300<br />
Plastic screen socket 12 x 50 mm 570003400<br />
Plastic screen socket 20 x 85 mm 570003200<br />
Blow-out device for Dübel Sprint 570003500<br />
7
EPOXY rESiN adHESiVES<br />
8<br />
<strong>EGO</strong>POXid 2000 rapid<br />
application example<br />
• Excellent mechani-<br />
cal properties<br />
• No surface tack<br />
• Alkali-resistant<br />
<strong>EGO</strong>POXid 2000 rapid<br />
50 ml cartridge<br />
10 ml h<strong>and</strong>-operated<br />
cartridge<br />
14 pcs/carton 5 pcs/plastic bag<br />
Colour<br />
Article No. Article No.<br />
Transparent 782000060 782000056<br />
• Initial strength <strong>EGO</strong>POXID 2000 Rapid is a transparent, 2-component, fastsetting<br />
adhesive supplied in two-chamber cartridges that cures<br />
without shrinkage – even at temperatures down to 5° C – to<br />
form a hard, shock-resistant bond. The fast system for highstrength<br />
material joints <strong>and</strong> repair work.<br />
Suitable for dowelling bronze letters. For combination bonding<br />
<strong>and</strong> fixing <strong>and</strong> for bonding different materials such as concrete,<br />
artificial stone, steel, aluminium, wood, glass, paper, UPVC,<br />
polyester, polystyrene, ABS, PC etc.<br />
Mixing ratio 1:1
<strong>EGO</strong>POXID 2100 Transparent Liquid<br />
• Very low shrinkage<br />
• No surface tack<br />
• Alkali-resistant<br />
• Grindable<br />
<strong>EGO</strong>POXid 2100 transparent filler<br />
• Very low shrinkage<br />
• No surface tack<br />
• Alkali-resistant<br />
• Grindable<br />
EPOXY rESiN adHESiVES<br />
<strong>EGO</strong>POXID 2100 Transparent Liquid 6 pcs/carton<br />
0.5 kg 1.0 kg<br />
pump-head pump-head<br />
bottle bottle<br />
Comp. B Comp. A<br />
Colour<br />
Article No. Article No.<br />
Transparent 782100670 782100680<br />
<strong>EGO</strong>POXID 2100 Transparent Liquid for filling plug holes <strong>and</strong><br />
grooves <strong>and</strong> for bonding artificial stone. Solidification of clayey,<br />
s<strong>and</strong>y <strong>and</strong> porous natural stones including treatment of cracks.<br />
Suitable corrosion proofing (painting, embedding) of metals <strong>and</strong><br />
for tarsia works (filling joints).<br />
Mixing ratio: 1: 1<br />
<strong>EGO</strong>POXid 2100 transparent filler<br />
50 ml cartridge 200 ml cartridge<br />
14 pcs/carton 12 pcs/carton<br />
Colour<br />
Article No. Article No.<br />
Transparent 782100060 782100170<br />
0.8 kg can 1.6 kg can<br />
Comp. B Comp. A<br />
6 pcs/carton 6 pcs/carton<br />
Colour<br />
Article No. Article No.<br />
Transparent 782100772 782100781<br />
<strong>EGO</strong>POXID 2100 Transparent Filler is suited for use on vertical<br />
surfaces. For high-quality optical/structural bonding of poorly<br />
wettable natural stone with surface transparency <strong>and</strong> other<br />
materials. For bonding granite façade profiles, kitchen worktops,<br />
washst<strong>and</strong>s etc., for fixing blending boards <strong>and</strong> panels,<br />
<strong>and</strong> for attaching reinforcing profiles. Specially suited for bonding<br />
artificial stone <strong>and</strong> other alkaline materials.<br />
9
EPOXY rESiN adHESiVES<br />
10<br />
<strong>EGO</strong>POXid 2200 corundum<br />
• Decorative design<br />
• Silicone-free<br />
• Resistant to ageing<br />
• Frostproof<br />
Possibilities for creating a 12-mm wide non-skid edging<br />
12 x 5 mm groove<br />
+ 1 mm protrusion<br />
application example<br />
1<br />
Clean the groove, for example, using<br />
<strong>EGO</strong>VIT cleaning agent 100.<br />
4<br />
Then apply <strong>EGO</strong>POXID 2200 corundum to the groove<br />
so that the groove is fully saturated.<br />
5 x 5 mm groove<br />
+ 1 mm protrusion<br />
(type: T-section)<br />
2<br />
<strong>EGO</strong>POXid 2200 corrundum 12 pcs/carton<br />
Colour<br />
200 ml cartridge<br />
Article No.<br />
Anthracite 782200170<br />
<strong>EGO</strong>POXID 2200 Corrundum is the top-quality alternative to<br />
conventional adhesive tapes. It is an epoxy-resin formulation<br />
with added quartz <strong>and</strong> corrundum as well as adhesion promotors<br />
for simple <strong>and</strong> safe production of non-slip edges <strong>and</strong><br />
anti-skid profiles on steps <strong>and</strong> floor coverings made of natural<br />
stone, artificial stone, concrete, ceramics etc.<br />
8 x 5 mm groove<br />
+ 1 mm protrusion<br />
(type: T-section)<br />
Then use <strong>EGO</strong>POXID 2200 adhesive tape to mark out<br />
a clean edge.<br />
5<br />
Remove excess material using a rectangular smoothing<br />
tool so that it is flush with the adhesive tape.<br />
3<br />
Without groove<br />
+ 1 mm protrusion<br />
not recommended!<br />
Important: when squeezing the adhesive out of<br />
the can, discard the first 10 cm!<br />
6<br />
Remove the adhesive tape immediately, or at most<br />
do not wait longer than 5-10 min.
<strong>EGO</strong>POXid 2400<br />
2-component Joint Filler<br />
<strong>EGO</strong>POXid 2800<br />
Injection Resin<br />
• Only slight<br />
yellowing<br />
• Strong bonds<br />
• Grindable<br />
• Can be painted<br />
• <strong>High</strong> chemical<br />
resistance<br />
EPOXY rESiN adHESiVES<br />
<strong>EGO</strong>POXid 2400<br />
• Waterproof<br />
• Resistant to frost<br />
Colour<br />
Sanitary grey<br />
6 kg PE two-chamber bucket<br />
Article No.<br />
782307086<br />
<strong>and</strong> weathering Ideally suited for jointing wall <strong>and</strong> floor coverings, e. g. ceramic<br />
tiles, natural stone, artificial stone, marble, stoneware, clinker,<br />
concrete, floor pavements, fibre cement, wood chip, metal etc.<br />
that are exposed to high chemical <strong>and</strong> mechanical loads.<br />
<strong>EGO</strong>POXid 2800 Injection Resin 6 pcs/carton<br />
Colour<br />
Transparent/<br />
Brownish<br />
1.5 kg 1000 g Comp. A<br />
cans 500 g Comp. B<br />
Article No.<br />
782800780<br />
<strong>EGO</strong>POXID 2800 “Injection Resin“ is a low viscosity epoxy resin<br />
featuring excellent chemical <strong>and</strong> mechanical properties for<br />
filling cracks in concrete, concrete ware <strong>and</strong> floor pavements.<br />
Bonding natural <strong>and</strong> artificial stone, especially with very thin<br />
adhesive layers.<br />
11
<strong>EGO</strong> POlYurEtHaNES<br />
12<br />
<strong>EGO</strong>flEX 411<br />
Structural Polyurethane Adhesive & Sealant<br />
<strong>EGO</strong>flEX 441<br />
Structural <strong>and</strong> Assembly Adhesive<br />
application example<br />
<strong>EGO</strong>flEX 411 20 pcs./carton<br />
300 ml 600 ml<br />
Egopack sausage<br />
Colour<br />
Article No. Article No.<br />
Concrete grey 341317001 341377001<br />
<strong>EGO</strong>FLEX 411 is a one-part, fast-cure, premium quality polyurethane<br />
adhesive <strong>and</strong> sealant. Upon exposure to atmospheric<br />
moisture it vulcanizes to a durable, rubberlike seal.<br />
Typical Applications:<br />
Manufacture of automotive vehicles, boats, ships, containers,<br />
caravans, ventilation, air conditioning, refrigeration, heating<br />
installation, apparatus engineering, connecting joints.<br />
<strong>EGO</strong>flEX 441 20 pcs./carton<br />
Colour<br />
310 ml cartridge<br />
Article No.<br />
Light beige 344142501<br />
<strong>EGO</strong>flEX 411 <strong>EGO</strong>flEX 441<br />
<strong>EGO</strong>FLEX 441 is a one-part, solvent-free polyurethane adhesive<br />
featuring excellent adhesion on many substrates. Upon<br />
exposure to atmospheric moisture <strong>and</strong> an additional surface<br />
humidifying respectively it vulcanizes to a high performance,<br />
semi-rigid adhesive within a very short period of time.<br />
Typical Applications:<br />
For universal <strong>and</strong> high quality bonding of concrete, natural stone,<br />
ceramics, ficre cement, wood <strong>and</strong> wooden materials, plaster<br />
boards, insulating boards, metals, duroplastic materials, PVC, various<br />
other plastics etc. Adhesion is mostly insufficient on bitumen,<br />
PE, PP <strong>and</strong> PTFE. Egoflex 441 is used in industrial, h<strong>and</strong>icraft <strong>and</strong><br />
building applications such as metal, window or door construction,<br />
for bonding laminate <strong>and</strong> insulating boards, for mounting window<br />
sills <strong>and</strong> corner fixation, for bonding natural stone, for fixing sign<br />
boards, coverings, panellings, floor fillets, styrofoam etc.
<strong>EGO</strong>SilicONE 351 Stone<br />
• Neutral<br />
• Does not cause<br />
bleeding/staining<br />
• Fungicial, bactericidal<br />
<strong>EGO</strong>SilicONE 352 Effect<br />
• Neutral<br />
• Does not cause<br />
bleeding/staining<br />
• Fungicidal,<br />
bactericidal<br />
<strong>EGO</strong>SilicON 351 Stein 20 Stück/Karton<br />
Farbe<br />
SilicONE SEalaNtS<br />
Kartusche<br />
310 ml<br />
Bestellnr.<br />
Schlauch<br />
400 ml<br />
Bestellnummer<br />
Anemone 338142370 –<br />
Anthracite 338148170 –<br />
Bahama-beige 338146170 338386170<br />
Beige 338142570 –<br />
Concrete-grey 338147470 338387470<br />
Boston matt 338147328 –<br />
Brown 338146070 –<br />
Chinchilla 338141870 –<br />
Dark green 338145270 –<br />
Façade-grey matt 338149828 –<br />
Joint-grey matt 338149628 –<br />
Jasmine 338142270 338382270<br />
Light grey 338149670 –<br />
Manhattan 338142670 338382670<br />
Pearl-grey 338148870 338388870<br />
Sanitary-grey 338149700 338389700<br />
Silk-grey – 338387500<br />
Black 338148000 338388000<br />
Stone-grey matt 338147070 –<br />
Sunset 338143270 –<br />
Transparent 338140300 338380300<br />
White 338141000 338381000<br />
<strong>EGO</strong>SILICONE 351 Stone is a premium quality, one-component<br />
sealant for durable sealing of connecting <strong>and</strong> expansion joints<br />
for all types of natural stone.<br />
Meets requirements of DIN 18540<br />
DIN 18454-E<br />
<strong>EGO</strong>SilicONE 352 Effect 20 pcs/carton<br />
Colour<br />
310 ml cartridge<br />
Article No.<br />
Autunno 339140600<br />
Bianco 339140200<br />
Cashmir 339140100<br />
Cristalit 339140800<br />
Galaxy 339140700<br />
Giallo 339141000<br />
Greco 339140900<br />
Grigio 339140400<br />
Pietra 339140500<br />
Rosso 339140300<br />
Terra 339141100<br />
Verde 339141200<br />
E<strong>EGO</strong>SILICONE 352 Effect is a premium quality, one-component<br />
special silicone sealant with structured effect to achieve perfectly<br />
matched or contrasting joints. For all types of natural <strong>and</strong><br />
artificial stones.<br />
Meets requirements of DIN 18545-E<br />
DIN 18540<br />
13
accESSOriES<br />
14<br />
tooling <strong>and</strong> cleaning agents<br />
adhesive tapes<br />
Mixing tube Nozzles<br />
for 2-component epoxy resins<br />
<strong>EGO</strong>POXid 2-component Guns<br />
tooling <strong>and</strong> cleaning agents<br />
<strong>EGO</strong> St<strong>and</strong>ard 500 ml<br />
5000 ml<br />
Tooling Agent PE can<br />
PE can<br />
Bestellnummer 680260000 680720000<br />
<strong>EGO</strong> Stone 500 ml<br />
5000 ml<br />
Tooling Agent PE can<br />
PE can<br />
Bestellnummer 636260000 636720000<br />
<strong>EGO</strong>VIT 100<br />
400 ml<br />
spray<br />
500 ml<br />
alu can<br />
Bestellnummer 681760000 681260000<br />
<strong>EGO</strong>VIT 100<br />
3000 ml<br />
can<br />
12000 ml<br />
can<br />
Bestellnummer 681710000 681740000<br />
CONLOC<br />
400 ml<br />
Cleaner 901 spray can<br />
Bestellnummer 790901760<br />
CONLOC 902<br />
500 ml<br />
alu can<br />
3000 ml<br />
can<br />
Bestellnummer 790902260 790902710<br />
CONLOC 902<br />
12000 ml<br />
can<br />
Bestellnummer 790902740<br />
adhesive tapes<br />
Article Size Packaging Article No.<br />
<strong>EGO</strong>POXID 2200<br />
Adhesive Tape<br />
1 mm x<br />
20 mm<br />
50 m/roll 782200820<br />
Masking Tape 30 mm 50 m/roll 570305000<br />
Plasto Masking Tape 19 mm 50 m/roll 570015000<br />
Double-sided<br />
Adhesive Tape<br />
6 mm x<br />
3.2 mm<br />
15 m/roll 570027000<br />
Mixing tube Nozzles for 2-component epoxy resins<br />
Article Article No.<br />
200 ml mixing tube nozzle for Egopoxid<br />
2100 Transparent Filler 200 ml<br />
570000906<br />
200 ml mixing tube nozzle for<br />
Egopoxid 2200 Corrundum<br />
570000908<br />
50 ml mixing tube nozzle<br />
without tip<br />
570000901<br />
50 ml mixing tube nozzle<br />
with tip<br />
570000902<br />
Tip 570000903<br />
10 ml mixing tube nozzle for<br />
Egopoxid h<strong>and</strong>-operated cartridge<br />
<strong>EGO</strong>POXid 2-component Guns<br />
570000919<br />
Article Article No.<br />
2-component h<strong>and</strong> gun 50 ml 1:1,<br />
with 1:1 <strong>and</strong> 2:1 plunger<br />
570000905<br />
2-component h<strong>and</strong> gun 200 ml 2:1 570000907
<strong>EGO</strong>POlYEStEr transparent<br />
Material Basis Polyester resin<br />
Applciation Temperature 0°C to +60°C<br />
Service Temperature Up to +100°C<br />
Mixing Ratio 100 g/2 g curing agent<br />
Pot Life (23°C, 50 % Approx. 5 min.<br />
rel. air humidity)<br />
Green Strength Approx. 15 min.<br />
Final Strength Approx. 60 min.<br />
Colour Honey-transparent<br />
<strong>EGO</strong>POlYEStEr colourit<br />
Material Basis Polyester resin<br />
Applciation Temperature 0°C to +60°C<br />
Service Temperature Up to +100 °C<br />
Mixing Ratio 100 g/2 g curing agent<br />
Pot Life (23°C, 50 % Approx. 10 min.<br />
rel. air humidity)<br />
Green Strength Approx. 20 min.<br />
Final Strength Approx. 60 min.<br />
Colour S<strong>and</strong>-grey<br />
dübel Sprint<br />
Material Basis Polyester resin<br />
Applciation Temperature -5°C to +40°C<br />
Mixing Ratio 10:1<br />
Pot Life (23°C, 50 % 2 to 40 min.<br />
rel. air humidity)<br />
Cure Time 15 to 360 min.<br />
Colour Grey<br />
<strong>EGO</strong>POXid 2000 rapid<br />
Material Basis Epoxy resin<br />
Application Temperature +10°C to +40°C<br />
Pot Life (23°C, 50 % Approx. 5 to 10 min.<br />
rel. air humidity) (20 g mixture)<br />
Green Strength Approx. 12 hours<br />
Final Strength Approx. 48 hours<br />
Colour Transparent<br />
<strong>EGO</strong>POXid 2100<br />
Material Basis Epoxy resin<br />
Application Temperature +10°C to +40°C<br />
Mixing Ratio: 2:1<br />
Pot Life (23°C, 50 % Approx. 30 to 40 min.<br />
rel. air humidity) (20 g mixture)<br />
Green Strength Approx. 12 hours<br />
Final Strength Approx. 48 hours<br />
Colour Transparent<br />
<strong>EGO</strong>POXid 2200 corundum<br />
Material Basis Epoxy resin<br />
Application Temperature +15°C to +40°C<br />
Mixing Ratio 2:1<br />
Pot Life (23°C, 50 % Approx. 20 min.<br />
rel. air humidity)<br />
Light Foot Traffic Approx. 12 hours<br />
Final Strength Approx. 48 hours<br />
Colour Anthracite<br />
<strong>EGO</strong>POXid 2400<br />
Material Basis Epoxy resin<br />
Mixing Ratio A:B = 5.1:0.9<br />
Density (23° C, 50 % Component A: Approx. 1.42 g/cm³<br />
rel. air humidity) Component B: Approx. 1.14 g/cm³<br />
Application Temperature +10°C to + 30°C<br />
<strong>EGO</strong> <strong>Natural</strong> <strong>StONE</strong> <strong>PrOductS</strong><br />
Service Temperature -40°C to +100°C<br />
(short periods up to +120°C)<br />
Work Life (23°C, 50 % Approx. 80 to 90 minutes<br />
rel. air humidity) (1 kg compound)<br />
Green Strength After 24 h<br />
Full Strength After 7 days at room temperature<br />
(reistant to chemicals) After 14 days at temperatures<br />
between +5° C <strong>and</strong> +10° C<br />
Colour Sanitary grey<br />
<strong>EGO</strong>POXid 2800 injection resin<br />
Material Basis Epoxy resin<br />
Application Temperature +10°C to +40°C<br />
Mixing Ratio 2:1<br />
Pot Life (23°C, 50 % Approx. 70 min.<br />
rel. air humidity) (20 ml mixture)<br />
Green Strength Approx. 12 hours<br />
Final Strength Approx. 48 hours<br />
Colour Transparent-brownish<br />
<strong>EGO</strong>flEX 411<br />
Material Basis Polyurethane<br />
Density Approx. 1.3 g /cm3<br />
Application Temperature +5°C to +40°C<br />
Service Temperature -40°C to +90°C<br />
(for limited period up to 120°C)<br />
Shore A Hardness Approx. 40<br />
Movement Accommodation 15 %<br />
Skin Formation Time Approx. 50 min. under normal<br />
ambient conditions<br />
Cure Rate Approx. 3-4 mm in 24 hours<br />
<strong>EGO</strong>flEX 441<br />
Material Basis Polyurethane<br />
Density Approx. 1.5 g /cm3<br />
Application Temperature Approx. +10°C to +30°C<br />
Service Temperature Up to 110°C<br />
Cure Time Approx. 24 hours at 20°C<br />
Skin Formation Time Approx. 3-4 min. at 20°C <strong>and</strong><br />
when moistened with water<br />
Skin Formation Time Approx. 10 min. at 20°C<br />
<strong>and</strong> 60 % rel. air humidity<br />
Green Strength Approx. 15 min. at 20°C<br />
<strong>EGO</strong>SilicONE 351 Stone<br />
Material Basis Silicone rubber, plasticizerfree<br />
Density Approx. 1.02 g/cm3<br />
Application Temperature Approx. +5°C to +40°C<br />
Service Temperature Approx. -60°C to +150°C<br />
Shore A Hardness Approx. 24<br />
Movement Accommodation 25 %<br />
Skin Formation Time 15-30 min.<br />
Viscosity Non sagging<br />
<strong>EGO</strong>SilicONE 352 Effect<br />
Material Basis Silicone rubber, plasticizerfree<br />
Density Approx. 1.03 g/cm3<br />
Application Temperature Approx. +5°C to +40°C<br />
Service Temperature Approx. -60°C to +150°C<br />
Shore A Hardness Approx. 24<br />
Movement Accommodation 25 %<br />
Skin Formation Time 15-30 min.<br />
Viscosity Non sagging<br />
15
<strong>EGO</strong> dichtstoffwerke GmbH & co. Betriebs kG<br />
Lilienthalstraße 7 . 82205 Gilching . Germany<br />
Tel: +49 (0) 81 05/2 17-0<br />
Fax +49 (0) 81 05/2 17-33<br />
E-Mail: info@ego.de . Internet: www.ego.de<br />
<strong>EGO</strong> distribution centre Nuremberg<br />
Gewerbering 10 . 90547 Stein . Germany<br />
Tel: +49 (0)9 11/96 739-0<br />
Fax +49 (0)9 11/96 739-19<br />
E-Mail: vzego@ego.de<br />
Subject to misprints, technical <strong>and</strong> sales programme alterations. Deviations from the original colours are caused by the printing technology used. Edition 03/2008<br />
Concept + Design: www.acs-visualisierung.de