Dames & Moore, 1999 - USDA Forest Service

TOTAL DIESEL RANGE HYDROCARBONS
WA TPHd Range C12 to C24 by GC/FID
and Motor Oil
LIMS ID: 98-21921 QC Report No: Y964-Dames & Moore
Matrix: Soil Project: Holden Mine
17693-005-019
Data Release
Reported: 11/17/98
ANALYTICAL
RESOURCES
INCORPORATED
Date Dilution Diesel *HC Motor Oil Surrogate
Lab ID Sample ID Analyzed Factor Ranqe ID Ranqe Recovery
Y964MB Method Blank
Y964A DMLG-4-2'
Y964B DMLG-4-4'
~ 9 6 4 DMLG-4-4' ~
~ 9 6 4 ~
DMLG-2-4 '
Y964D DMLG-5-2'
Y964E DMLG-1-2 '
Y964E DMLG-1-2'
Y964ED DMLG-1-2'-DUPL
Y964MB Method Blank
Y964F DMLG-1-4'
Y964FR DMLG-1-4'
Y964G DMLG-3-2'
Y964H DMLG-3 -4 '
Y964HR DMLG-3-4'
Valuee reported in ppm (mg/kg) on a dry weight basis. K,,, '*A3 ,L,y
Surrogate ie Methyl-Arachidate.
* ID indicates, in the opinion of the analyst, the petroleum product with the best pattern
match. 'NOt indicates that there was not a good match for any of the requested products.
Diesel quantitation on total peaks in the range from C12 to C24.
Motor'Oil quantitation on total peaks in the Motor Oil Standard range.
Data Qualifiers
U Compound not detected at the given detection limit.
J Indicates an estimated value below the calculated detection limit.
S No value reported due to saturation of the detector. Dilution required.
D Indicates the surrogate was not detected because of ailution of the extract.
E Indicates a value above the linear range of the detector. Dilution required.
NR .Indicates no recovery due to matrix interference.
B Indicates compound also detected in the method blank.
FORM-1 WA TPHD