Hibond Catalogue Book under process - Hi-Bond Bearings Pvt. Ltd.

Recommendations

Info

For Private Circulation :- INTRODUCTION The application pages list engine or vehicle manufacturers in alphabetical order. Each manufacturer's section commences with a quick reference index including the page and panel in which the application can be found. Each index is sequenced by model or engine in alphabetical, data and engine size order, as shown in the example below. This column contains bearings , bush or thrust washer model. This column indicates the number of bearings or pieces required for an engine. This column shows hibond Part No. This column indicates maker's Part No (OEM Part No.) The upper and lower limits of the crank pin or journal diameter or ID and OD for thrush washer (In millimeters and inches) The internal diameter of the bearing housing. Upper and Lower limits are in millimeters and inches. The maximum wall thickness is published as a guide to assist bearing identification (In millimeters and inches) The nominal bearing length for use as a guide to bearing identification (In millimeters and inches) OE Reference No. And Other Reference No. Are Only For Cross Reference 2
GLOSSARY OF TERMS USED Con. Rod Bearing Main Bearing Main Bearing Flange ( FL ) Main Bearing Center or Intermediate ( C/I ) Con. Rod Bush or Small End Bush Camshaft Bearing or Bush Valve Rocker Bush Old Type ( O/T ) New Type ( N/T ) Gear End ( G.E ) Fly Wheel End ( F.W.E. ) Aluminium Tin Material ( A/T ) IMPORTANT NOTE The details provided in this catalogue have been collected from reliable sources. However for any incorrect details, no responsibility can be accepted. The items listed in this catalogue are being manufactured by HIBOND for Replacement and Export. Hence the engine or the manufacturer's name & part no. mentioned herein are for the purpose of reference and identification only. We would welcome any advice or suggestion for improvement of this catalogue. For Private Circulation :- OE Reference No. And Other Reference No. Are Only For Cross Reference 3
Page 1: For Private Circulation :- Manufact
Page 5 and 6: 3. Thrust Washers : Thrust Washers
Page 7 and 8: For Private Circulation :- Bearing
Page 9 and 10: For Private Circulation :- Position
Page 11 and 12: Description Nos hibond O. E Standar
Page 53 and 54:
Description Nos hibond O. E Standar
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
APPLICATION TYPE HB- NO. OEM VP REF
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
show all

Hibond Catalogue Book under process - Hi-Bond Bearings Pvt. Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?