Metal Surface Finishing & Plating Brochure - Pacific Coast Chemicals

Products for the
Pacific Coast Chemicals Company
2424 Fourth Street • Berkeley, California 94710 • (510) 549-3535 • www.pcchem.com

Pacific Coast Chemicals
Pacific Coast Chemicals is a leading supplier to the Surface Finishing Industry. Below is a sampling of
some of the products we carry. Contact us for more information our full line of products.
(510) 549-3535
2
Abrasives
Aluminum Oxide
Discs
Belts
Flap Wheels
Turkish Emery
Acids
Hydrochloric
Phosphoric
Sulfuric
Anodes
All Metals
Anode Bags
Anode Baskets
Antiquing Solutions
Brushes
Scrub
Long Handle
Potash Swabs
Buffing Wheels
Sisal
Cloth
Treated
All Sizes
Buffing Compounds
Complete Line
Dyes
All colors for Anodizing
Equipment
Filter Systems
Heaters
Pumps
Racks
Rectifiers
Spin Dryers
Filter Tubes
All Types & Sizes
pH Papers
Plating Chemicals
Cadmium
Chrome
Copper
Nickel
Tin
Zinc
Pre-Plate
Deoxidizers
Electro Cleaners
Etchants
Soak Cleaners
Surface Activation
Stainless Steel Processes
Electro Polish
Passivation
Wire
Aluminum
Copper

We proudly represent the following manufacturers:
• Atotech
• Flo King
• Henkel Surface Technologies
• Hubbard-Hall
• Jisco Abrasives
• Klingspor Abrasives
Chemicals offered by Pacific Coast Chemicals
• Nickel Sulfate; Liquid – sold in 5 or 55 gallon drums
• Nickel Chloride; Liquid – sold in 5 or 55 gallon drums
• Nickel Carbonate – sold in 44 lb. box
• Nickel Sulfamate; 24 oz. – sold in 5 or 55 gallon drums
• Cadmium Oxide – sold in 50 lb. pails
• Copper Sulfate; Liquid – sold in 5 or 55 gallon drums
• Cyanides – Sodium, Potassium, Copper, and Zinc
• Citri Surf – sold in 5 or 55 gallon drums
• Metalx / Nickel Stripper
• Sethco / Metpro
• Stellar Solutions
• Stone Chemical Company
• Tolber Division
• U.S. Specialty Color Corp.
Pacific Coast Chemicals
B-9 Nickel Strippers
• For fast removal of nickel from steel, copper, brass, zinc diecast, silver, gold, tin, aluminum,
lead and lead alloys
• No Etching
• No Fuming
• One-Component
• Non-Toxic
Stop-Off Lacquers
• Super XP 2000 – peelable stop off formulated specifically for electroless nickel, hard coat
anodizing and chemical milling. Available in bright orange or light red.
• Microshield – designed for use in most acid plating cycles. Transparent orange/red color.
• Microstop – used for gold, silver, phosphate coatings, copper, tin and zinc.
• Micromask – formulated for use in hard chrome plating. Bright red color
• Micropeel – designed for use in chrome and nickel cycles; green color.
Vinyl Plastisols
• Hot Dip Plastisols – Meets industry’s highest standards for corrosion and abrasion resistance.
Available in black, orange, red and green.
Tapes
• Miccrotape – Black, vinyl extruded tape for use in most plating cycles for masking parts and as
protection for plating masks. Available in ¾”, non-adhesive.
3

Pacific Coast Chemicals
4
FDSB (laminated) Sisal Buff is sewn with cotton fabric and
sisal. This buff is used for cutting on all types of metal, but is
less aggressive than the plain sisal buff. The Plain Sisal Buff
is made of burlap material. This buff is very aggressive and is
used on all types of metals for coarse cutting. Both buffs are
spirally sewn at 3 /8”, ¼” and 1 /8”. These two types of buffs are
available from 6” to 16” diameters.
FDSB Treated Sisal Buffs are sisal buffs treated to make them
very aggressive. The treated buff is indicated by color. The
green buff being more aggressive than the yellow. Both for fast
cutting down operation and even non-streak finishes. The red
buff is the most aggressive of the three colors. Buffs are
available in 6" and 16" diameters.
FDMB Muslin Buffs are full disc cotton buffs used for coloring
and finishing all types of metals. These buffs can be sewn
spirally from 1 /8" to ¾" and concentrically 1 /2", 3 /4", or 1 ". The
closer the stitch, the harder the buff. Loose muslin being the
softest with only one row of sewing around the arbor hole.
These buffs are available in 20 ply ( 1 /4" wide), 40 ply ( 1 /2" wide),
and 60 ply ( 7 /8" wide). Muslin Buffs are available from 6" to 16"
diameters. We also carry Yellow Treated Muslin buffs for
slightly aggressive coloring.
Flannel Buffs come double nap, flannel on both sides, or single
nap with flannel on one. Flannel is used when you desire a very
fine finish on soft metals.
Airway Buffs, sometimes called air-cooled or “ventilated” buffs,
have pleated cloth – usually 86/82 count – held by a metal
clinch ring in the center. Diameters run from 8” to 16” (even
measurement only) with centers of 3”, 5”, or 7” with adapters
for various arbor hole sizes. The amount of cloth in each section
is designated by #2 or #4, the least amount of cloth being #2.
More cloth makes the wheel tighter, more aggressive, and
durable. Pacific Coast stocks the #4. The buff is available with
many treatments – yellow, white, red, and blue.

ODCBS Open Face Sisal Buffs are constructed like the air
cooled buffs, except they are made of a laminated sisal and
cloth combination, and are available treated. Open face buffs
are available in 16" and 14” diameters, black and yellow.
Centerless Buffs are miniature airway buffs available in 6" and
8" diameters only. They come standard with a 1 3/4" arbor hole,
with adapters available from 1 /2" up to 1- 1 /4" arbor hole. They
are available in white and yellow muslin material and are ideal
for all smaller "coloring" operations.
Razor Edge Buffs are ideal to get into areas where no other
buffs can reach. Tapered from the center to finish on a razor
edge end, the buffs are available in 2½" through 8" diameters,
in unbleached cotton muslin or in the harder yellow treated
material.
Goblet Buffs are made for buffing the inside of bowls, cups,
mugs, lamps, etc., or any inside surface needing both the sides
and bottom finished. Goblet buffs can come in various forms
(round, tapered, square, or cylinder). Used with tapered
spindles.
Midget Buffs are very small muslin buffs used for finishing in
very small areas. Diameters in stock are from 7 /8" to 2". These
buffs are also available in other types of materials, such as
denim or sisal.
Pacific Coast Chemicals
5

Pacific Coast Chemicals
6
Wire Wheels These brushes are excellent tools, for medium to
heavy cleaning, rust removal, deburring, edge blending and
refining metal finishes. May be used individually or gang
mounted on a shaft. These wheels also come in a twisted knot
which makes them more aggressive.
Cartridge Rolls are a single piece, tightly wound construction,
made of "X" weight Resin Bond Aluminum Oxide cloth. Cartridge
Rolls provide an effective method of grinding, deburring,
blending, polishing and finishing of metal channels, contours,
recesses, side walls, and other hard to reach areas.
The PSA Disc is a sharp, durable aluminum oxide grain on a
heavy weight paper backing with a full phenolic resin bond
system. An open coat product which delivers a fast cut with an
exceptionally long life. Aluminum Oxide Resin Fiber Disc
provides an economical way for weld grinding, deburring,
blending, and most finish grinding applications.
Zirconia Fiber Disc provides a superior grinding performance in a
premium aluminum oxide resin fiber disc. A premium abrasive
grain delivers superior cutting rates and a longer useful life.
Abrasive belts are replacing polishing wheels because belts are
durable, fast cutting, very uniform on the surface and easily and
quickly changed. They are available in grits from 36 X or J to
400 X or J. The X belts are stiffer than J's because they have a
resin backing while the J's have a glue backing, the X being
more aggressive. Stock sizes of our belts are 2", 3", and 4" by
168". All other sizes available upon request.
Polishing Wheels or "set-up" wheels are glued, hard buffs,
primarily used on bumpers and steel wheels. These wheels can
be "set-up" with glue and emery. All sizes, stitching, and arbor
holes are custom made to order.

Denim Aprons, Platers Aprons, and Belly Pads in 12", 14",
16", and 18".
Denim and plastic sleeves are also available for hand protection.
Gloves in Canvas, Leather, Terry Cloth, Hot Mill, Brown Jersey,
and Black Rubber Latex. Elbow length, and Platers in rubber
with cloth interior.
Other specialty gloves are available upon request.
Brushes -Glue Brushes, Tampico and Black Nylon Platers Brush,
Scrub Brushes, and Plater Swabs. Mini Brushes in steel and
nylon are also available upon request.
Safety Wear - Several styles of face masks, safety glasses, and
ear plugs are available for protection. Head knit covers (not
shown) are also available upon request.
Accessory Cleaning & Cutting - Cleaning erasers, crystalion
bricks, pumice stone, rake heads with handles, Scoth Brite pads,
in various grits are also available for cleaning purposes.
Cleaning sticks 8” x 8” x 2”.
Pacific Coast Chemicals
7

Pacific Coast Chemicals
8
Abrasive Grains - We also carry loose abrasive grains such as
Turkish Emery and Aluminum Oxide, in grits 60 to 320 grit.
Whiting powder used for finished parts is available as well.
Pots & Glues - 2-quart and 4-quart glue pots, hot (ground)
glue, cold liquid S-glue, Gripmaster-glue. All used for setting up
polishing wheels.
MACHINE ACCESSORIES - 8" and 6" Flanges, 4" washers,
lathe wrenches, brass nuts, tapered screw points, cap bolts, nut
covers, and shaft spacers 1 /2" to 4" long.
Copper and Aluminum Wire - The copper wire, used for
wiring products to be plated, is available in 12, 14, 16, 18, 20,
22, and 24 gauges. It is sold by the roll or by the case. Each roll
is 10 pounds, 6 rolls per case. The aluminum wire is sold in 12
pound rolls and is available in 8 (.1285), 11 (.0907), 14 (.0641),
16 (.0508), 18 (.0403), and 20 (.0320) gauge (numbers in
parentheses represent nominal diameter in inches). The copper
rod (not shown) is available upon request in 1 /8", 3 /16", 1 /4",
5 /16", 3 /8", and 1 /2" in 12 ft. lengths.
Nickel Anodes – Pacific Coast Chemicals carries Nickel Anodes
by Inco and Falconbridge. From Inco, S-Rounds (sulphurized)
and R-Rounds are available. From Falconbridge, D-Crowns
(sulphurized) and electrolytic crowns are stocked. Electrolytic
1x1s and 2x2s are available. Also available are nickel flats (1/2”
x 4” x 27”) and rolled depolarized nickel anode bars in 18”, 24”,
30”, 36”, 48” and 72” lengths.

Anodes
Silver available in slab or bar and popcorn
Tin star and nuggets available
Zinc is available in 2” balls and bars in common lengths that are
made to order. Zinc slabs are also stocked in 2” x 9” x 18”
pieces. All are a special high grade (99.99 pure).
Copper Anodes –either oxygen free or phosphorized nuggets
available; 2” diameter copper balls.
Anode Dipping & Drying Baskets – Titanium anode baskets
are available in any size and configuration. Spiral steel baskets
for ball anodes are available in any length and diameter.
Dipping baskets are available in titanium, stainless steel and
polypropylene. The titanium and stainless baskets are available
in any size desired. The polypropylene baskets are in stock in 6”
and 12” diameters. They are a one piece molded basket. When
ordering, please specify all basket dimensions.
Anode Bags & Hooks – Anode bags are available in napped
polypropylene or cotton. Many sizes and shapes are available.
Also available are titanium, monel and copper hooks from 4” to
10”.
Hand Pads – This product is available in various sizes and
grades. They are designed for cleaning, finishing and microdeburring
of all materials and shapes and particularly useful as a
more efficient alternative to steel wool, wire brushes, emery
cloth, etc.
Color Description Size Pads/Case
Tan Heavy Duty 6” x 9” 60
Maroon General Purpose 6” x 9” 60
Gray Ultra Fine 6” x 9” 60
Green Scouring Pad 6” x 9” 60
Rolls – Rolls are available in a wider range of grades than hand
pads, although the applications are very similar. Rolls are used
in stainless steel fabrication.
Pacific Coast Chemicals
9

Pacific Coast Chemicals
10
Compounds
• Stainless Steel Compounds (HBM-771, A16). Primarily
used for preliminary and intermediate polishing of stainless
steel and other hard metals. Also widely used for cutting
before chrome plating process. (HBM-777 BLK) Fast cut,
dry same as HBM-771. (25 lb. & 50 lb. box).
• Tripoli Compounds (HTM-459, D-14). Widely used for
cutting down brass, aluminum, die-casting, plastic, etc., as
well as providing a clean surface such that color buffing can
be done most effectively. (25 lb. & 50 lb. box).
• Green Chrome Rouge (HGM-273, C-3). For use in
obtaining the highest quality mirror finishes for stainless
steel and aluminum. (25 lb. & 50 lb. box).
• Jewelers Rouge Bars
• White Chrome Rouge. For use in the coloring of aluminum
parts giving a high-luster to steel and aluminum. (25 lb. &
50 lb. box).
• Red Rouge. Used to bring out a high color on gold, silver,
sterling, platinum and brass. (25 lb. & 50 lb. box).
Grease Sticks (HSM-222, G-8). Also known as wheel grease
and (G-2) belt grease; Used to lubricate the face of the belt
and discs in metal working applications to reduce loading and to
improve finish.
Greaseless Compound (in 80 & 220 grit). Commonly
known as LEA Compound & Formax. These greaseless
compounds produce a semi-dull appearance on the work piece
commonly referred to as a satin or scratch finish. These are
primarily used for deburring, polishing, blending, and removing
machine marks, pits, and surface imperfections. They are also
excellent for cleaning rusty surfaces and weld burns.
(approximately 3 lbs. each; 20 bags per shipping case). Other
grades available upon request.
PRODUCT NO. GRADE GRIT SIZE DESCRIPTION
515-6002 PB-80 80 Coarse
515-6003 PB-100 100 Coarse
515-6004 PB-120 120 Medium Coarse
515-6005 PB-150 150 Medium
515-6006 PB-180 180 Medium Fine
515-6007 PB-200 200 Medium Fine
515-6008 PB-220 220 Fine
All grades are packaged in peelable, re-sealable plastic bags. Instructions for use are printed on the bags. Tubes weigh
approximately 3 lbs. each / 20 bags per shipping case.

ANTIQUE FINISHES
Pacific Coast Chemicals
Mi-Tique ® 1791 – “Oxidizes” brass, bronze, copper, and Muntz metal. Color
tones from light Flemish browns and statuary bronzes to blackish-browns to black
U.S. 10B finishes. Desirable underlying red tones revealed upon “highlighting” the
brown colors. Produces the blackest finish of the Mi-Tique ® solutions. Liquid
concentrate diluted with 3 to 10 parts water. Immersion times of 30 seconds to 3
minutes, depending on desired color.
Mi-Tique ® 1791 LB – Produces the same results as Mi-Tique ® 1791, but
specifically formulated for use over very thin, bright brass plating.
Mi-Tique ® 1792 – “Oxidizes” brass, bronze, copper, and Muntz metal. For light
brown and chocolate brown finishes, which are enriched with a more definite
reddish tone than Mi-Tique ® 1791. Liquid concentrate diluted with 3 to 10 parts
water; 1 to 5 minute immersions.
Mi-Tique ® 1793 – Blackens silver and nickel. “Oxidizes” brass, bronze, copper
and Muntz metal for a color range of light brown to deep brownish-blacks without
the red tones of Mi-Tique ® 1792, and without the underlying red tones of Mi-
Tique ® 1791 when “highlighting” the browns. Liquid concentrate diluted with 2 to
6 parts water. Immersion times of 1 to 5 minutes.
Mi-Tique ® 1795 – Blackens pewter, tin or lead alloys. Liquid concentrate used
straight or diluted with up to 5 parts water. Immersion times of 1 to 5 minutes.
Mi-Tique ® Green – Room temperature antiquing solution that produces a natural
Verdi-green on copper and brass. Liquid concentrate is diluted with 3 parts water.
Immersion times of 1 to 3 minutes.
11

Pacific Coast Chemicals
12
INDUSTRIAL BUFFERS
Buffers are designed for use with soft cloth wheels ONLY. Specific buffing applications may require
the addition of operator safety devices. Consult with a safety engineer before installation.
Prices include flanges and nuts but do not include wheels.
Catalog
Number
333B 1458
Hp Voltage Phase Hz Idle RPM
Shaft
Diameter
Max.
Wheel
Diameter
Width
Min/Max
114 * 1/4 115 1 60 1800 1/2" 6” 0.5/0.75 24
111 * 1/3 115 1 60 3600 1/2" 6” 0.5/0.75 25
332B * 3/4 115/230 1 60 1800 3/4" 8” 0.38/1.25 55
333B * 3/4 115/230 1 60 3600 3/4" 8” 0.38/1.25 56
334B ** 3/4 208-230/460 3 50/60 1500/1800 3/4" 8” 0.38/1.25 54
330B ** 3/4 208-230/460 3 50/60 3000/3600 3/4" 8” 0.38/1.25 56
407B ● 1 115/230 1 60 1800 7/8” 10” 0.5/1.25 60
410B ● 1-1/2 115/230 1 60 3600 7/8” 10” 0.5/1.25 61
409B ** 1-1/2 208-230/460 3 50/60 1500/1800 7/8” 10” 0.5/1.25 59
412B ** 1-1/2 208-230/460 3 50/60 3000/3600 7/8” 10” 0.5/1.25 62
Shipping
Weight
1250 ‡ 2 115/230 1 60 1800 1-1/4” 12” 2.0/2.5 164
1251 ‡ 2 115/230 1 60 3600 1-1/4” 12” 2.0/2.5 160
1252 ‡ 3 208-230/460 3 50/60 1500/1800 1-1/4” 12” 2.0/2.5 156
1253 ‡ 3 208-230/460 3 50/60 3000/3600 1-1/4” 12” 2.0/2.5 156
1457 † 5 208-230/460 3 50/60 1000/1200 1-1/4” 14” 2.5/3.0 228
1458 † 5 208-230/460 3 50/60 1500/1800 1-1/4” 14” 2.5/3.0 218
1454 † 7-1/2 208-230/460 3 50/60 1500/1800 1-1/4” 14” 2.5/3.0 229
1453 † 7-1/2 208-230/460 3 50/60 3000/3600 1-1/4” 14” 2.5/3.0 223
NOTES: Not for use with wire wheels. Prices do not include pedestals or wheels. Some buffing applications may require the addition of operator
safety devices such as guards and exhaust hoods with ventilation.
* Supplied with 8-ft. 3-conductor power cord and on/off switch connected for 115 volts.
** Supplied with on/of switch connected for 208-230 volts less cord.
● Supplied with on/off switch connected for 115 volts less cord.
‡ Supplied with manual starter, connected at factory for 230 volts. Specify voltage when ordering.
† Supplied with magnetic starter, connected at factory for 230 volts. Specify voltage when ordering.

Pacific Coast Chemicals
R.P.M. at
DIAMETERS OF WHEELS (IN INCHES)
Arbor or
Spindle
4 6 8 10 12 14 16 18
SURFACE SPEED IN FEET PER MINUTE (S.F.P.M.)
20 22 24
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3200
3400
3600
3800
4000
837
942
1047
1152
1256
1361
1466
1571
1675
1780
1885
1989
2094
2199
2304
2408
2513
2618
2722
2827
2932
3037
3141
3351
3560
3769
3979
4188
1256
1413
1570
1727
1884
2042
2199
2356
2513
2670
2827
2984
3141
3298
3455
3612
3770
3927
4084
4241
4398
4555
4712
5026
5340
5654
5969
6283
1675
1885
2094
2304
2513
2723
2932
3142
3351
3560
3770
3979
4189
4398
4608
4817
5027
5236
5445
5655
5864
6074
6283
6702
7121
7539
7858
8377
2094
2356
2618
2880
3142
3404
3666
3927
4189
4451
4713
4975
5236
5498
5760
6022
6284
6545
6807
7069
7331
7592
7854
8378
8901
9425
9948
10472
2513
2827
3141
3455
3769
4084
4398
4712
5026
5340
5654
5969
6283
6597
6911
7225
7540
7854
8168
8482
8796
9110
9425
10053
10681
11309
11938
12566
2932
3298
3665
4031
4398
4764
5131
5497
5864
6230
6597
6963
7330
7696
8063
8429
8796
9162
9529
9895
10262
10629
10996
11729
12462
13193
13927
14661
3351
3770
4189
4608
5027
5446
5865
6284
6703
7121
7540
7959
8378
8797
9215
9634
10053
10471
10890
11309
11728
12147
12566
13404
14242
15079
15917
16755
3770
4241
4712
5183
5655
6126
6597
7069
7540
8011
8482
8954
9425
9896
10367
10839
11310
11781
12253
12724
13196
13667
14137
15079
16022
16964
17907
18850
4189
4712
5236
5760
6283
6807
7330
7854
8378
8901
9425
9948
10472
10996
11519
12043
12566
13090
13613
14136
14660
15184
15708
16755
17802
18850
19897
20944
4608
5184
5760
6336
6912
7488
8064
8640
9216
9792
10368
10944
11520
12096
12672
13248
13824
14400
14976
15552
16128
16704
17280
18431
19583
20735
21887
23039
Note: When two orange figures appear in a vertical column, the lower speed is suitable for polishing; the higher for buffing. For higher speeds,
consult the manufacturer.
5026
56555
6283
6911
7540
8168
8796
9425
10053
10681
11310
11938
12566
13194
13822
14451
15079
15708
16336
16964
17592
18221
18850
20107
21363
22619
23876
25132
13

Pacific Coast Chemicals
PREFORMED TUMBLING AND VIBRATORY CERAMIC ABRASIVES
COMPOSITIONS:
14
P-60: Light cut, superior finish, leaves a clean surface, good for aluminum parts.
78-81 lbs./ft3. Meets aircraft specs for no aluminum oxide abrasive
P-40: Good cut and wear life, excellent finish, economical, ideal for general purpose use.
85-90 lbs./ft 3
P-20: Fast cut, short time cycle, for medium and heavy burrs, semi matte finish.
85-90 lbs./ft 3
COMPARISON CHART:
FORTUNE TUMBLEX W/A CAPCO W/P BULL
P-60 AX-44 L C-40 HSD F ---
P-40 AX-90 J C-80 VH C LL
P-20 AX-65 G --- SF/FC XC FC
SHAPE SIZE
ANGLE CUT
TRIANGLE (ACT)
CYLINDRICAL
WEDGE (CW)
TRIANGLE (TRI)
STOCK SHAPE SIZE
STOCK
P-20 P-40 P-60
P-20 P-40 P-60
2 x 11/16 ● ● ANGLE CUT
1-7/8 x 5/8 ● ●
1-5/8 x 5/8 ● TRISTAR (AC3S) 1-3/8 x 7/16 ● ●
1-3/8 x 7/16 ● ● 1-1/8 x 7/8 ●
1-1/8 x 7/8 ● ● 1-1/8 x 3/8 ● ●
1-1/8 x 3/8 ● ● ● 1-1/8 x 5/16 ●
7/8 x 7/8 ● ● 7/8 x 7/8 ●
7/8 x 3/8 ● 7/8 x 5/16 ● ● ●
7/8 x 5/16 ● ● 5/8 x 3/4 ●
3/4 x 3/4 ● 5/8 x 5/16 ● ●
5/8 x 5/8 ● ● ●
5/8 x 1/4 ● ●
5/8 x 1/2 x 5/16 ● ●
5/8 x 1/4 ● ● ANGLE CUT
7/8 x 1-1/2 ● ●
3/8 x 1/4 ● CYLINDER (ACC) 5/8 x 1-1/2 ●
3/8 x 3/16 ● ● ● 5/8 x 1-1/8 ● ● ●
1/4 x 5/16 ● 1/2 x 1-3/8 ●
1/2 x 1-1/8 ● ● ●
1-1/2 x 1-1/2 ● ● 7/16 x 7/8 ● ● ●
1 x 1 ● ● ● 3/8 x 1-1/8 ● ●
5/8 x 5/8 ● ● ● 3/8 x 5/8 ● ● ●
7/16 x 7/16 ● ● ● 1/4 x 5/8 ● ●
3/8 x 3/8 ● 3/16 x 5/8 ●
7/8 x 1/4 ●
1/4 x 3/16 ●
3/16 x 3/8 ● ●
5/32 x 5/16 ● ● ●

BELTMASTER BACKSTAND IDLER
With Universal (floor, wall, or ceiling) Base or Pedestal Base.
Features:
• Belt tension and tracking easily
adjusted from operating position.
• Control rod support brackets where
convenient.
• Telescoping control rods for length
adjustment.
• Balanced all steel idler pulley, 10” dia.
5” wide.
• Grease Packed for Life Heavy-Duty
Seal Master ball bearings.
• Tracking adjustment moves idler
pulley parallel with face of contact
wheel. Does not fight or twist the belt
and break the bond.
• Tracks belts of all widths from ¼” to
5” at desired position on the contact
wheel.
• Belt tension release lever frees or
tightens belt in a single motion for
quick change.
• Eight inch long mounting slots, front
and rear.
• Over 12” lateral adjustment flexibility.
Pacific Coast Chemicals
Speeds Production – Versatile adjustment
affords ideal belt tension control for all kinds of
work. Positive control of belt tension and
tracking from operator’s position avoids endless
movement back and forth from contact wheel
to idler.
Saves Belts – Tracking adjustment moves
idler pulley from side to side instead of turning
the pulley face, avoiding twisting and stretching
which can break the bond.
Tracks Narrow Belts – Holds belts of any
width from ¼” to 5” right where you want it.
Pulley for 6” belts (optional).
Quick Belt Change – Tension release lever
frees or tightens belt in a single motion.
Constant Operation; Minimal Maintenance
Requirements – For over 30 years, Belt
Masters have proven their reliability and
performance in actual service on some of the
heaviest duty constant production lines.
15