State of Technology Report for Force Main Rehabilitation, Final ...
State of Technology Report for Force Main Rehabilitation, Final ...
State of Technology Report for Force Main Rehabilitation, Final ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Technology</strong>/Method CIPP/Glass Fiber Rein<strong>for</strong>ced<br />
I. <strong>Technology</strong> Background<br />
Status Innovative<br />
Date <strong>of</strong> Introduction 2002 in Sweden, 2004 in Hong Kong and Canada<br />
Utilization Rates 12 miles/year<br />
Vendor Name(s) Nordipipe<br />
Norditube Technologies (a Sekisui-CPT Company)<br />
501 N. El Camino Real, Suite 224<br />
San Clemente, CA 92672<br />
Phone: 714-267-1030<br />
Web: www.cpt-usa.com/info<br />
Practitioner(s) Mr. Jean Lemire, Eng.<br />
City <strong>of</strong> Cornwall<br />
1225 Ontario Street<br />
Cornwall (Ontario) Canada<br />
K6H 5T9<br />
Tel. (613) 930-2787<br />
Email jelemire@cornwall.ca<br />
Description <strong>of</strong> <strong>Main</strong><br />
Features<br />
<strong>Main</strong> Benefits<br />
Claimed<br />
Mr. Tony Di Fruscia, Eng. P.Eng.<br />
City <strong>of</strong> Montreal<br />
13301, Sherbrooke Street East<br />
Suite 209<br />
Montreal (Quebec) Canada<br />
H1A 1C2<br />
Tel. (514) 872-6678<br />
Email tonydifruscia@ville.montreal.qc.ca<br />
Ms. Annie Fortier, Eng.<br />
City <strong>of</strong> Dorval<br />
60 Martin Avenue<br />
Dorval (Quebec) Canada<br />
H9S 3R4<br />
Tel. (514) 633-4244<br />
Email a<strong>for</strong>tier@ville.dorval.qc.ca<br />
Norditube is a CIPP system that incorporates a glass fiber rein<strong>for</strong>ced layer<br />
between two felt layers, impregnated with epoxy or vinylester resin. A PE<br />
coating is on the interior. Resin impregnation is done by the installation<br />
contractor, either at his facility or onsite.<br />
• Fully Structural – no support <strong>of</strong> the host pipe required <strong>for</strong> internal or<br />
external loads<br />
• NSF 61 listing (cold water, up to 78 o F) and BNQ approval <strong>for</strong> potable water<br />
• High pressure resistance<br />
• Negotiate bends up to 45 degrees<br />
• 48 inches maximum diameter<br />
<strong>Main</strong> Limitations<br />
Cited<br />
• No US installations<br />
Applicability <strong>Force</strong> <strong>Main</strong> Gravity Sewer Laterals Manholes Appurtenances<br />
(Underline those that<br />
apply)<br />
Water <strong>Main</strong> Service Lines Other:<br />
Service Application<br />
II. <strong>Technology</strong> Parameters<br />
Pressure water and wastewater<br />
Service Connections Internal cut and external re-instatement by excavation<br />
Structural Rating<br />
Claimed<br />
Type 4 – Fully structural<br />
Materials <strong>of</strong><br />
Polyethylene coating in contact with potable water, non-woven felt and glass<br />
Composition fiber chopped mat, with epoxy or vinyl ester resin. Epoxy is used <strong>for</strong> potable<br />
water projects (NSF listing), and vinyl ester <strong>for</strong> other applications. Vinyl ester<br />
resin is half the cost <strong>of</strong> the epoxy.<br />
Diameter Range, 5-48 inches<br />
A-44
Change language