Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
35<br />
installation of fi nishes of perimeter, steps and ramps<br />
installation of fi nish of perimeter<br />
The fi nish on the perimeter, where no spikes against a wall, made of chipboard covered with tape on both sides of melanin, closes the perimeter area is<br />
visible and can be placed with a metal in an “L”. In some cases, for example, when the diff erence in height between the fl oors is less than 17 cm, can also<br />
be used as a step.<br />
When you set the position where the steps are to be installed, it is necessary to remove the pedestals 4.5 cm. and align with the axis of the panels. At<br />
this point, place the board that acts as a lift against the axis of the panels and adjust it to the slab using screw caps and supports.<br />
Perimeter boards are installed at the same height as the fl oor have an aluminum corner that can be easily fi xed with wood screws and cover the<br />
thickness of the board itself and complete it from an aesthetic standpoint.