raised floors - Butech

1 

raised floors 

TECHNICAL 

SOLUTIONS

4 

© butech ® 

The contents of this catalog are protected by Intellectual Property Law, Royal Decree 1 / 1996. Any reproduction of it, in whole or in part, 

without the consent of Porelanosa Grupo is liable under the Penal Code.

index 

raised acces fl ooring 

wood panels 

sulphate panels 

ste structure 

pedestals 

psa pedestals 

joints to pedestal head 

stringer 

joints for stringers 

types of structure 

acoustic features 

installation the ste 

raised acces fl ooring for exteriors 

paving stones 

structure 

installation 

cli-ker n 

components 

advantages 

references 

installation 

how to get a budget of a butech system? 

showrooms 

4 

5 

8 

12 

14 

16 

18 

19 

21 

22 

25 

30 

37 

39 

39 

41 

44 

46 

47 

47 

49 

53 

57 

5

aised access flooring 

Raised access flooring (RAF) was created in response to the need to hide large volumes of cables, pipework, tubing, etc. 

that are typically found in offices, technical rooms, and other locations. 

The installation of a raised floor creates a space under the floor where all these services, including equipment and room 

cooling systems, can be neatly housed and hidden away. 

designed to be installed in: 

Facilities with a high volume of services or in rooms that house technical equipment that requires special ventilation. 

Commercial applications: offices, libraries, museums, schools, shopping centres, etc. 

Technical applications: telecommunications/electricity plants, control rooms, laboratories, data centres, etc. 

advantages 

• Ability to hide away all types of ugly and dangerous cables, pipes etc under the floor. 

• Improved installation efficiency in comparison to conventional floors (installation rate of about 40 m 2 /day). 

• Easy to take with you when relocating offices. 

• Option of rerouting services following installation of floor. 

advantages over other raised access floor systems 

• Able to withstand a high mechanical load. 

• The potential for combining different structures, as required in each particular case. 

• A high resistance to fire under laboratory tests. 

• Very low dimensional tolerances, between +0,1 and -0,2 mm. This means that the panels can easily be 

interchanged. 

• Cores made of high-performance materials with very high densities. 

• Compliance with UNE EN ISO 9001, guaranteeing quality controls during each stage of the manufacturing process. 

• On the top surface, any 60 x 60 ceramic tile by Porcelanosa or other non-ceramic coverings (plastic laminate, 

linoleum, vinyl, granite, aluminium, steel, carpet, parquet etc) can be used. 

• Tiles protected by a plastic surround to prevent the edges from breaking. 

• A wide range of complementary products to ensure a good finish. 

4

5 

panels with chipboard core 

They are made of chipboard with a high-performance resin binder. Available in a thickness of 38mm, they feature an aluminum, galvanized steel or 

plastic lower covering, thus offering slightly different properties to suit each individual case. 

The panels have a plastic surround to prevent the edges from breaking. 

covering piece 

edging wood panel 

edging 

panel 38M1 

lower covering 

Panel consisting of a chipboard core with a thickness 38 mm with a high-performance resin binder. 

lower coating 38M1a: 

With aluminum sheet of thickness of 0.15 or 0.05 mm to create an excellent barrier against fire and moisture, while forming an equipotential frame to 

maintain electrical continuity features of the floor. 

inside coating 38M1f: 

To increase the flexural stiffness and the total mechanical resistance, the panel comes with a galvanized steel sheet of thickness of 0.05 mm on the 

inside. This allows, in addition obtaining an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical 

continuity features of the floor. 

The perimeter is beaded with anti-crunching plastic material with a thickness of 1 mm of ABS to upper ceramic coating with a thickness of 0.45 mm of 

ABS to the rest of upper coatings.

physical features (not including coating material): 

Standard Test U.M. Tolerance 

nominal size mm -0.1 +0.2 598 x 598 

600 x 600 

Thickness mm -0.1 +0.2 38 

Diagonal difference mm Máx. ≤0.4 

slope ºC ±15` 3º 

Density Kg/m3 ±5% 720 

Weight Kg ±5% 9.8 

Transverse electrical resistance EN 1081 Ω Máx. ≤10 10 

Edges self-extinguishing UL 94 V0 

38M1A 38M1F 

Fire Resistance EN 13501-1 Class Bfl Class Bfl Fire Reaction EN 13501-2 30 30 

mechanical features 

Note: the breaking load is obtained by multiplying by 2 the maximum load allowed. 

Upper coating 

A = Aluminum Sheet 

F = Galvanized steel sheet 

L = Plastic Laminate 

V = Vinyl 

D = Linoleum 

G = Rubber 

C = Carpet 

P = Parquet 

T = Ceramic 

R = Stone recomposed 

S = Natural Granite 

Table - Technical Properties 38M1A 38M1F 

Test standard – EN 12825 Type of stringers Type of stringers 

U.M. SIN L M P 

Coverage: A V D G C 

SIN L M P 

Concentrated load centre of side of the panel (2.5 mm deflection) kN 1.7 1.7 2.4 2.8 2.3 2.3 2.8 3.1 

Maximum allowed load centre of side of the panel kN 4.6 4.6 4.8 4.9 6.4 6.4 6.5 6.6 

Concentrated load at the center of the panel (2.5 mm deflection) kN 2.7 2.7 3.4 3.8 4.0 4.0 4.6 5.1 

Maximum load allowed in the center of the panel kN 6.7 6.7 6.9 7.0 7.6 7.6 7.7 7.8 

Uniformly distributed load kN/m2 14.0 14.0 18.0 22.0 21.0 21.0 25.0 30.0 

Class according to EN 12825 4 4 4 4 

Coverage: F L 

6 6 6 6 







Coverage: T R S 

6 6 6 6 

Concentrated load centre of side of the panel (1 mm deflection) kN 1.1 1.1 1.2 1.4 1.8 1.8 1.9 2.0 


Concentrated load at the center of the panel (1 mm deflection) kN 2.0 2.0 2.2 2.3 3.0 3.0 3.4 3.5 



Clase según la EN 12825 1 1 1 1 3 3 3 3 

6

7 

panel 38M2 

Panel consisting of a chipboard core with a thickness 38 mm with a high-performance resin binder. 

lower coating 38M2a: 



lower coating 38M2f: 

To increase the flexural stiffness and the mechanical resistance, it is applied in the panel a sheet of galvanized steel of thickness 0.5 mm on the lower 

side. 

This allows, in addition obtaining an excellent barrier against fire and moisture, to form an equipotential frame to maintain electrical continuity 

features of the floor. 


ABS to the rest of upper coatings. 



Nominal size Mm -0.1 +0.2 598 x 598 

600 x 600 

Thickness Mm -0.1 +0.2 38 

Diagonal difference Mm Máx. ≤0.4 

Slope ºC ±15` 3º 

Density Kg/m 3 ±5% 650 




38M2A 38M2F 




Upper coati 


F = galvanized steel sheet 

L = plastic laminate 

V = Vinyl 

D = Linoleum 

G = Rubber 

C = Carpet 

P = Parquet 

T = Ceramic 



Table - Technical Properties 38M2A 38M2F 

Test estándar – EN 12825 Type of stringers Type of stringers 



SIN L M P 







Coverage: F L 

5 5 5 5 






Class according to EN 12825 3 3 3 3 5 5 5 5

panels with calcium sulfate core 

It consists of a mineral soul of a single layer based on calcium sulfate of high density. It can be found in thicknesses of 15, 29 and 34 mm and with 

lower coating of aluminum or galvanized steel. As in the wood panels, the perimeter of all the panels has a plastic surround to prevent the edges from 

breaking. 

perimeter 

protection 

panel 30S 

upper coating 

calcium sulphate core 

lower coating 






Uniformly distributed load kN/m 2 7.0 7.0 8.0 10.0 10.0 10.0 12.0 13.0 

Class according to EN 12825 - - - - 2 2 2 2 

It is formed by a core of mineral of a single layer based of calcium sulfate, high-density 30 mm thickness, with a high-performance resin binder and 

completely free of wood particles. 

lower coating 30Sa: 



lower coating 30Sf: 





ABS to the rest of upper coatings. 

perimeter 

protection 

8

9 




Nominal size mm -0.1 +0.2 598 x 598 

600 x 600 

Thickness mm -0.1 +0.2 30 

Diagonal difference mm Máx. ≤0.4 

Slope edge ºC ±15` 3º 

Density Kg/m 3 ±5% ≥1.500 





30SA 30SF 


Upper coating 


F = galvanized steel sheet 

L = plastic laminate 

V = Vinyl 

D = Linoleum 

G = Rubber 

C = Carpet 

P = Parquet 

T = Ceramic 



Table - Technical Properties 30SA 30SF 

Test estándar – EN 12825 Type of stringers Type of stringers 



SIN L M P 







Coverage: F L 

4 4 5 5 








5 5 5 5 

Concentrated load centre of side of the panel (1 mm deflection) kN 1.4 1.5 1.6 1.7 1.6 1.6 1.8 1.9 





Class according to EN 12825 1 1 1 1 1 1 1 1

11 

panel 15k 

Consisting of mineral support material with a layer of inert nominal thickness 12.5 mm. 

Upper coating consisting of whole stone of natural stone materials (marble or granite), nominal thickness of 20 mm, rectifying, polishing and 

chamfering. 

The elaboration of the panel includes the rectification of precision to ensure the dimensional tolerances in both the perimeter and the thickness of the 

panel, to ensure a perfect modularity. 

lower coating 15kf: 





PVC to the rest of upper coatings. 



Nominal size Mm -0.1 +0.2 594 x 594 

Thickness Mm -0.1 +0.2 12.5 

Diagonal difference Mm Máx. ≤0.4 

Slope ºC ±15` 4º 

Density Kg/m3 ±5% ≥1.100 




15KF 

Fire Resistance EN 13501-1 Class Bfl Fire Reaction EN 13501-2 30 


Table - Technical Properties 15KF 

Test standard – EN 12825 Type of stringers 


Coverage: S 

Concentrated load centre of side of the panel (1 mm deflection) kN 1.4 1.4 1.6 1.8 

Maximum allowed load centre of side of the panel kN 4.1 4.1 4.2 4.3 

Concentrated load at the center of the panel (1 mm deflection) kN 2.4 2.4 2.6 2.9 

Maximum load allowed in the center of the panel kN 4.9 4.9 5.0 5.1 

Uniformly distributed load kN/m2 12.0 12.0 14.0 17.0 



Upper coating 

S = Natural Granite

structure 

The structure is made up of pedestals and stringers, which support the floor covering and ensure the necessary height and rigidness. 

pedestals 

100% galvanised steel structure. This pedestals dictate the floor 

height according to the project requirements. Each pedestal 

incorporates a series of plastic noise-reduction heads fitted with 

four positioning lugs. 

One of the main advantages of the pedestal system is that it 

is fitted with a 14 mm threaded bolt that can be adjusted to 

accommodate different floor height requirements. 

stringers 

Like the pedestals, the stringers are made entirely of galvanised 

steel. Their main function is to increase the strength of the floor. 

They are covered with special noise-reduction strips. 

The nominal heights and the way of the pedestals have been selected for greater overlap between two successive pedestals using a long screwed bolt. 

Because of this, it has obtained a greater range of height adjustment for each type of pedestal (nominal - / +50 mm) with the ability to better adapt to 

the unevenness of the floor, without resorting constantly to systematic measurements. 

From the point of view of performance, it presents a high resistance to bending vertical load and / or eccentric, thanks to a screwed bolt M16 section, a 

tube of diameter 20 mm of thickness of 2 mm, internally calibrated to obtain a coupling with smaller tolerances and therefore less spaces and a direct 

connection between the screwed bolt of the disc base and tube, without need of interposing deformable plastic elements. 

To ensure electrical continuity of the pedestal, the base disc has been drilled to accommodate the screw and nut for electrical connection. 

In the disc of base have been added 4 holes of 8,5 mm and 3 holes of 6,5 mm, at the height of the radial nerves, to enable and facilitate the injection of 

fluid adhesive on the back of the base when the pedestal is already installed. 

When necessary, and with a simple intervention without special tools, the structure offers the possibility to adjust the height of the pedestal shortening 

the tube if necessary. 

12

pedestals 

The pedestal is available in two versions: 

• Version with screw-in fitting for reduced height (nominal values of 55.70 and 85 

• Version with tube for higher heights (from 100 mm nominal). 

In both versions, the pedestal is made entirely of galvanized steel (minimum 

thickness of 3μ, white color) on all surfaces (both visible as not) and including the 

cut parts by galvanizing bath based of ions Cr3 + electro deposited. 

100 mm 

± 20 ± 30 

-30 

+35 

from 220 to 620 mm 

with 40 mm step 

± 40 ± 50 

kN 40 30 25 22 21 20.5 20 20 

(*): The allowable axial load is given to the first deformation. The breaking load or collapse load is obtained by multiplying the permissible axial safety 

factor equal to 2. 

14

pedestals psa 

It is supplied in a unique version with adjustment under the head to cover a range of nominal heights of finished pavement of a minimum of 110 mm up 

to 500 mm. 

The nominal height of the finished pavement is achieved by adding the thickness of the panel to the nominal height of the pedestal. The pedestal 

is made completely of steel with galvanized superficial treatment of minimum thickness of 3μ by galvanizing bath based on chromium ions electro 

deposited, applied to all surfaces. 

The pedestal consists of two main elements: the head riveted to the screwed bolt and base disc riveted to the tube. 

The pedestals are supplied with joints to the head, semi-rigid plastic printing, black, conductor, carrying an anti vibration function of air sealing and 

centering of the panel. 

It recognizes that the raised technical floor has obtained the certification PSA Medium Grade with the following settings: 

• 35SF panel 

• Structure with pedestal of nominal height of 410 mm, set at a maximum height of 450 mm, and stringers of type “P”. 

Therefore, for heights higher to 450 mm and with panels or other structures, the obtained certification is not applicable. 

overview of the pedestal 

Model U.M. 75 95 130 170 200 260 310 360 410 

Version With adjustment under the head 

Nominal height mm 75 95 130 170 200 260 310 360 410 

Nominal range of height adjustment mm ±15 ±15 ±30 ±30 ±30 ±40 ±40 ±40 ±40 

Permissible axial load with safety factor 2 (according to UNI EN 

12825)(*) 

The following is an overview of the pedestal above mentioned. 

kN 70 70 70 68 65 60 48 35 26 

(*): The permissible axial load is the load indicated to the first deformation. The breaking load or collapse load is obtained by multiplying the 

permissible axial safety factor equal to 2. 

16

17 

references 

kEa description SaP 

B80305602 PEDESTAL H = 55 MM (-10/+10) 100091646 

B80305609 PEDESTAL H = 70 MM (-15/+15) 100091649 

B80305605 PEDESTAL H = 85 MM (-15/+20) 100091650 

B80305614 PEDESTAL H = 100 MM (-20/+20) 100091624 

B80305606 PEDESTAL H = 130 MM (-30/+30) 100091625 

B80305589 PEDESTAL H = 150 MM (-30/+35) 100091079 

B80305612 PEDESTAL H = 190 MM (-40/+40) 100091626 

B80305599 PEDESTAL H = 220 MM (-50/+50) 100091627 

B80305608 PEDESTAL H = 260 MM (-50/+50) 100091628 

B80305601 PEDESTAL H = 300 MM (-50/+50) 100091629 

B80305600 PEDESTAL H = 340 MM (-50/+50) 100091640 

B80305615 PEDESTAL H = 380 MM (-50/+50) 100091641 

B80305604 PEDESTAL H = 420 MM (-50/+50) 100091642 

B80305607 PEDESTAL H = 460 MM (-50/+50) 100091643 

B80305598 PEDESTAL H = 500 MM (-50/+50) 100091644 

B80305603 PEDESTAL H = 540 MM (-50/+50) 100091645 

B80305613 PEDESTAL H = 580 MM (-50/+50) 100091647 

B80305616 PEDESTAL H = 620 MM (-50/+50) 100091648 

B80305374 PEDESTAL H = 95MM (-15/+15) PSA 100084397 





B80305351 PEDESTAL H = 420MM (+50/-50) PSA 100082735 

B80305352 PEDESTAL H = 460MM (+50/-50) PSA 100082736 

B80305375 PEDESTAL H = 310MM (-40/+40) PSA 100084396

joints to head of pedestal 

Joint for the head of the pedestal, made of stamped semi-rigid plastic, non-conductive (electrical resistance R > 10 10 Ohm) white opaque colour, 

nominal thickness 2.5 mm and squared shape with rounded angles. Each angle has a tooth of grip to place in the centre and hook to the head of the 

anchoring base. At the top, it is provided with four teeth for the positioning and centring of the panels. The joint also acts attenuating noise. Its nominal 

weight is 5 gr. 

joints to head of PSa pedestal 

Semi-rigid plastic stamped in black, conductive electrical resistance R

19 

stringers 

butech can supply two different types of stringers: 

• Basic stringer of orthogonal direction connection (versions “L”, “M” or “P”); 

• Additional stringers of diagonal direction connection (versions “D” or “X”). 

All stringers are produced by cold stamping galvanized steel sheet (minimum 

thickness of 3μ), with special profile and are designed to improve mechanical 

endurance and ensure reduced tolerances of modules and the ease of exchange 

them. 

Its blockage in the radios by auto-tapping metric screws ensures the electric 

continuity of the system and gives a great stability to the structure. 

stringers version “L” (light) 

Lightweight Stringer (“L”) has been obtained by means of stamping cold from galvanized steel sheet (material Dx51D + Z 150 according to EN 10142 

with minimum thickness 15 μ hot dip galvanizing). They are opened section (30 mm width, 21mm height, 0.8 mm thick) and 220 gr. weight. The 

stringer is equipped at both ends with the “snap-on” system, a system of special hook that allows optimum and fast placement on the radii of the head 

of the pedestals, that ensures electrical continuity of the system. 

stringers version “M” (medium) 

Stringer section L: 25x12x0,8 mm 

Length: 547 mm 

Unit Weight: 0.175 Kg 

Nominal amount: 5.7 pz/m 2 

Nominal amount screws: 11.4 pz/m 2 

Medium Stringer (“M”) has been obtained by means of stamping cold from galvanized steel sheet (material: Dx51D + Z 150 according to EN 10142 

with minimum thickness 15 μ hot dip galvanizing). They are opened section (30 mm wide and 38 mm height, 0.8 mm thick), and 390 gr. weight. It has 

longitudinal nerves, present also in the vertical sides and the laps of the bottom side, to increase benefits with respect to bending, in comparison with 

the previous type “L”, and improve the way to control the deformations. In addition to the hole for the ground connection, the ends are equipped with 

the system of special hook “snap-on” that allows optimum and fast placement on the radii of the head of the pedestals for the lock with screw, ensuring 

in that way, electrical continuity of the system. 

Stringer section 25x38x0,8 mm 




Nominal amount screws: 11.4 pz/m 2

stringers version “P” (heavy) 

Heavy Stringer (“P”) has obtained a special profiling of galvanised steel which increases its performance with respect to the “L” and “M” models 

(material: Dx51D + Z150 according to EN 10142 with minimum thickness 15μ hot dip galvanizing). They are closed section (30 mm wide, 30 mm high 

and 1 mm thick) and 600 gr. weight. The ends are fitted with a system of special hook that allows optimum and fast placement on the radii of the head 

of the pedestals. The stringer is equipped with a hole for the ground connection. 

stringers of diagonal connection (version “D” or “X”) 

B80305592 tornillos para travesaños l/m/p 100091083 

B80305617 travesaño ligero 598x598 100091655 

B80305618 travesaño medio 598x598 100091659 

B80305232 travesaño pesado 598X598 100071899 

Stringer section 25x40x1 mm 





All the stringers are supplied with special joints of black extruded plastic with anti vibration function and air tightness. They do not have sharp edges, 

especially dangerous during handling and assembly, which may damage the plastic covering to pass underneath. 

references 


Stringer section D 20x40x1 mm 





Stringer section X 20x40x1 mm 


Unit Weight: 0.340 kg 



20

21 

screws for stringers L/M/P types of structure 

The screws, made of galvanized steel, are used to connect the STRINGER at the head of the pedestal to give greater security and stiffness to the system 

stiffness. 

joint for stringers 

Extruded black plastic, thickness of 1 mm, non-conductive, anti vibration function and air tightness. The joint is applied in the stringer with a simple 

hand pressure. 

joint for stringers type L, M and P 

Section dimensions: 25x8 mm 

Nominal length: 546 mm 


joint for stringers type X and D 

Type D 




Type X 




references 


B80305234 junta de travesaños PSA 100071897 

B80305591 junta de travesaños l/m/p 100091082

types of structure 

The structure offers several configuration options that can be performed using both orthogonal and diagonal stringers, increasing the mechanical 

stability and capacity of the pavement. Such stringers are used light, medium and heavy which are placed in the radii of the head of the pedestals. The 

diagonal stringer D or X (stringers shape) can be used with any orthogonal stringer (L, M or P). 

structure configuration 

type S 

• Without stringers 

• Range 55 ÷ 620 mm. 

type M 

configuration 

• Medium stringers 

• Range 55 ÷ 620 mm. 

configuration 

type L 

• Light stringers 

• Range 55 ÷ 620 mm. 

type P 

configuration 

Configuration perimeter zones 

• Heavy stringers 

• Range 55 ÷ 620 mm. 

configuration 

Configuration perimeter zones Configuration perimeter zones 

22

25 

sound proofing properites of rafs 

A room’s soundproofing capacity depends on the soundproofing properties of each of its components, including the floor. 

The factors that influence a RAF’s soundproofing capacity are the material that the top covering is made of, the material of the core 

and its density, and the height of the plenum. 

butech’s RAFs are made of ideal soundproofing materials with the right densities to guarantee the best soundproof protection, 

with cores with a density of up to 1.500 kg/m 3 . 

To ensure maximum comfort and good soundproof protection, butech conducts rigorous soundproofing tests of its floors, in 

accordance with DIN 52210. This standard analyses four different cases: protection against airborne noise, impact noise, horizontal 

airborne noise and vertical airborne noise.

horizontal transmission of noise 

In the data presented are the steps taken in a real building in accordance with current 

regulations (EN ISO 140-12), to assess the eff ect of reduction of the fl oor of modular access 

in relation to the horizontal transmission of aerial noise ( or how a person on a fl oor of a 

building perceives the ambient noise present in an adjacent fl oor). 

In this case, measures are taken with a modular access fl oor already installed. The noise 

pressure levels are taken in the two adjacent fl oors and the horizontal aerial noise 

attenuation expressed by the norm of the parameter Dnfw, measured in dB (decibels). 

The higher the value the greater the reduction in relation to the object to be tested and 

therefore the greater the reduction in aerial noise transmission from one fl oor to the 

adjacent. 

The following data were collected from the panels: 

The fi rst diagram shows the values of Dnfw obtained in diff erent structural confi gurations panels 38M1A and 35kA. The observed conditions diff ered 

depending on whether there were stringers or not, if there was a noise insulation sheet placed between the substrate and the tile, and if it was adhered 

or not (it is required to paste the pieces that have been installed without stringers). On the other hand, it was also considered installing an acoustic 

partition under the fl oor. 

NOTE: The height of the supports was 300 mm for all confi gurations. 

attenuation of horizontal aerial noise (dnfw) depending on access fl oor confi guration 

42 

40 

38 

36 

34 

32 

30 

28 

26 

24 

34 36 34 36 29 29 34 

36 

37 

38 

Structure without stringers Structure with stringers 

Structure P with acoustic 

insulation sheet without stick 

The table below allows obtaining the dB correction factors, which need to be added or removed for panels with multiple covers, starting with those 

without coating (those listed in the fi rst table). 

Type of coating Correction factor [dB] 

Vinyl (V), rubber (G), linoleum (D) 1 

Laminate (L), Steel (F) -1 

Natural stone (S) and reconstructed (R), Gres (T) -1 

Parquet (P) 0 

Structure P with acoustic insulation 

sheet stuck 

The same as previous situation + 

acoustic partition under the fl oor 

26

27 

The correction factors in dB, which are necessary to obtain the corresponding data for 38M2A panels (of 38M1A) and 30SA (of 35kA) are shown in the 

table below. 


calcium sulfate 30S -1 

Chipboard 38M2 0 

Natural stone (S) and reconstructed (R), Ceramic tile (T 

Finally, the correction factors in dB are shown below for obtaining panel data with a lower cover in steel instead of aluminum. 

Below are some examples of how to get the data for each particular group. 


Steel (F) 0 

Ex.1: Panel 38M1 + tile on a structure with stringers 

1. In diagram 1 the data in relation to the panel 38M1 with stringers obtained are M = 34 dB; 

2. From Table 1 is extracted correction factor for the coating of tiles (T), which is - 1dB. The horizontal aerial noise reduction is, therefore, (Dnfw) 34-1 = 

33dB 

Ex.2: Panel 30SF + vinyl on a structure with stringers P and with acoustic insulation sheet stuck. 

1. In diagram 1 the data in relation to the panel 35SA with stringers P obtained are P = 36 dB; 

2. From Table 1 is extracted correction factor for the vinyl (V), which is + 1 dB; 

3. From Table 2 extracts the correction factor for the panel 30S starting at 35S, which is-1dB; 

4. From Table 3 extracts the correction factor in the lower cover in steel, which is 0 dB. Therefore, the reduction of aerial sound horizontal is (D nfw ) 36 + 

1-1+ 0 = 36dB. 

NOTE: It should be noted that the process of in-situ test was carried out in a modular access floor installed in compliance with current regulations in 

place with construction features and standard techniques. In particular, we note the following: 

• The slab was cleaned completely and then it was applied an anti-dust product; 

• The slab with RAP honeycomb shape of pre-compressed air was perfectly smoothed, with a total thickness of 20 + 5 cm; 

• A simple dividing wall was used for testing with a thickness of 100 mm (plasterboard 12.5 mm, stone wool + 40 + plasterboard12.5 mm); 

• A perimeter adhesive seal was placed on the edge of the tile 25x25mm; 

• The supports were stuck in compliance with appropriate regulations for the slab; 

• For the test it was used a sound insulation sheet with a thickness of 5 mm; 

• For the test it was used an acoustic partition under the floor sound with the same features of the partition wall. 

-1

vertical transmission of noise 

In the presented data are the steps taken in a real building in accordance with current 

regulations (EN ISO 140-8), to evaluate the eff ect of reducing the modular access fl oor in 

relation to the transmission of noise surface of the panel (or how a person in a . fl oor of a 

building perceives the noise present in an upper fl oor). In this case, measures are taken 

fi rst without the modular access fl oor in order to determine the features of the building 

itself. The same measures are taken then with the modular access fl oor already installed. 

The measurements are recorded for the description of the diff erences of the eff ect of 

the added element (modular access fl oor). We present the test results of impact noise 

reduction panel expressed by the parameter ALW measured in dB. The higher the value 

the greater the reduction in relation to the object to be tested and therefore the greater 

the reduction in the transmission of noise when walking on the fl oor that is transmitted to 

the lower fl oor. 

The following data were collected from the panels: 

The fi rst diagram shows ALw values obtained in diff erent structural confi gurations, and panels 38M1A and 35SA. 

The observed conditions diff ered depending on whether there were stringers or not, if there was a noise insulation sheet placed between the support 

and the tile and if it was stuck or not (required to stick the pieces have been installed without stringers). 

NOTE: The height of the supports was 300 mm for all confi gurations. 

vertical impact noise attenuation (ΔLw) depending on the confi guration of the access fl oor 

36 

34 

32 

30 

28 

26 

24 

22 

20 

18 

16 

36 

34 

21 21 23 23 25 

25 28 28 

Structure without stringers Structure with stringers M or L Structure with stringers P Structure P with insulation sheet 

stuck 

34 34 

The table below allows obtaining the dB correction factors, which need to be added or removed for panels with multiple covers, starting with those 

without coating (those listed in the fi rst table). 

Type of coating factor [dB] 

Vinyl (V), rubber (G), linoleum (D) 2 

Laminate (L), Steel (F) 1 

Natural stone (S) and reconstructed (R), Ceramic tile (T) -2 

Parquet (P) 1 

Structure P with insulation sheet 

without stick 

28

29 

The correction factors in dB, which are necessary to obtain the corresponding data for 38M1A panels and 30SA are shown in the table below. 


calcium sulfate 30S -2 

chipboard 38M1 -1 

Finally, the correction factors in dB are shown below for obtaining panel data with a lower cover in steel instead of aluminum. 

Below are some examples of how to get the data for each particular group. 


Steel (F) -1 

Ex.1: Panel 38M1A + tile with stringers M 

1. In diagram 1 the data in relation to the panel 38M1 with stringers M obtained are = 23 dB; 

2. From Table 1 is extracted correction factor for the coating of tiles (T), which is - 2dB. The reduction of vertical impact noise (ALw) is, therefore, = 23-2 = 

21dB. 

Ex.2: Panel 30SF + vinyl with stringers P 

1. In diagram 1 the data in relation to the panel with stringers 35SA with stringers P obtained are P = 25 dB; 

2. From Table 1 is extracted the correction factor for the coating on vinyl (V), which is + 2dB; 

3. From Table 2 is extracted the correction factor for the panel 30S starting at 35S, which is-2dB; 

4. From Table 3 is extracted the correction factor of the lower cover of steel, that is-1dB. Therefore, the reduction of vertical impact noise (ALw) is = 25+ 

2-2-1 = 24dB. 

Ex.4: Panel 38M1A + parquet with stringers M and acoustic insulation sheet NO stuck 

1. In diagram 1 the difference between data in relation to the panel 38M1 with stringers M and P obtained are = 23-25 =-2dB; 

2. In diagram 1 the data concerning the panel 38M1 and acoustic structure P and with acoustic insulation sheet NO stuck obtained are = 34dB; 

3. Now the data obtained in relation with the panel 38M1 with structure M and with acoustic insulation sheet NO stuck is as follows: 34-2 = 32 dB; 

4. From Table 1 is extracted correction factor for coating parquet (P) is + 1dB. Therefore, the reduction of vertical impact noise (ALW) is = 32 + 1 = 33dB. 

NOTA: 

It should be noted that the process of in-situ test was carried out in a modular access floor installed in compliance with current regulations in place with 

construction features and standard techniques. In particular, we note the following: 

• The slab was cleaned completely and then it was applied an anti-dust product; 

• The slab with RAP honeycomb shape of pre-compressed air was perfectly smoothed, with a total thickness of 20 + 5 cm; 

• A perimeter adhesive seal was placed on the edge of the tile 25x25mm; 

• The supports were stuck in compliance with appropriate regulations for the slab; 

• When using the acoustic insulation sheet having a thickness of 5mm. 

• For the test it was used a sound insulation sheet with a thickness of 5 mm; 

• For the test it was used an acoustic partition under the floor sound with the same features of the partition wall.

installation of ste 

general information 

The first stage of the installation begins with the definition of the two initial orthogonal axes, previously agreed with the Director of Operations and / 

or verifiable tracings or drawings.The operation is carried out by attaching to the walls, a pair of orthogonally twisted nylon threads, at a height slightly 

higher than the system where it will be installed. To determine the angle (90 °) of the two threads use the Pythagoras Theorem or simply 3-4-5 formula: 

starting at the crossing of the two threads, that delimits 3 m. in one and 4 m. in the other. The diagonal between the 2 points should be 5m. (The larger 

the diagonal, the smaller the margin of error). 

Installing a structure without stringers 

The four pedestals must be completed with joints and already be leveled according to the altitude. 

Place the first panel so that one corner is perfectly placed at the point where the threads cross (the position in terms of height can be obtained using a 

bubble level or laser level. 

Note: before placing the pedestals, apply glue to the base to ensure that the pedestals are fixed firmly to the floor. 

Continue installing the other pedestals; fill them with joints, and its related panels, aligning with one of the two threads of reference. Always check that 

the panels are installed at the correct height and that the glue covers the base to ensure that the entire base is firmly fixed. 

Continue placing the parallel rows of panels, using the same method described above, until all the inside panels have been installed. Be particularly 

careful about making sure the panels are at right angles, lined and flat. 

To ensure that all panels form a smooth surface, it is important not to disturb the floor during installation and for a minimum of 24 hours after the glue 

has been applied, the minimum time required for fixing the glue properly. 

NOTE: All supports must have joints. 

installing the stringers structure 

Starting at the points where the two octagonal threads cross and aligning with them, install and screw in the different components of the structure, 

pedestals, stringers and screws. 

Place the first wood panel so that one corner is perfectly placed at the point where the threads are crossed, then set the second panel being careful to 

align with the reference panel. 

Continue placing panels in parallel with nylon threads until all panels have been placed, ensuring that all panels are at right angles, lined and flat. 

All pedestals and stringers must have joints. 

When Installing floor over 500 mm. of high it is advisable to fix pedestals to concrete slab with glue (taking care not to disturb the floor at least 24 hours 

after being applied). 

installation in perimeter zone 

With structures of stringers, cut the stringers of perimeter to the required measure, fixing them with the proper screws and adjusting to the required 

height pedestals (the hole at the end of the stringers-cutting can be done directly with fixing screws). Cover the stringers and pedestals with joints 

which have been cut to size. 

Finish the floor cutting all the panels to the correct perimeter at correct measure, making sure that follow the shape of the wall perfectly. One of the 

simplest ways to do this is by placing the panel that needs to be cut next to the row adjacent to the perimeter, using a separator ribbon panel, pass 

through the wall, supporting a pencil in the separator so that the exact part to be cut can be marked. 

When so requested, it is possible to apply a layer of varnish to act as anti-dust protection on the sides of the molded panels. 

30

installation design 

suggested procedure 

Bolting the design dimensions is possible to draw a grid floor installation. 

• The grid is drawn according to strict procedures with regard to customer requirements that are stipulated in the contract for the installation (for 

example with a 45o installation, or according to a principal axis, or a project reference, etc. .). 

• If no such indications, the grid should be positioned by calculating the minimum possible waste and avoiding small perimeter panel sections, 

setting initial two orthogonal axes. 

• To place them correctly, you should cut all perimeter panels. D 

• Avoid adjust complete panels to the perimeter walls if the walls are not perfectly linear, and therefore do not offer enough support or assurances 

that the panels are aligned properly. When possible, avoid close perimeters with panels less than 150 mm size, because they are less stable. 

• This procedure of graphic design can be carried by placing a sheet of paper with a squared tracing to the same scale on a map of the area or, 

alternatively, using a computer program design. This procedure is extremely important to install the panels properly as it allows the necessary 

amount of material is determined and shown to planners and installers the position of the pedestals and, thus, where the systems themselves fit. 

• To make the system easier to fit, it is also possible to trace the design of the floor in advance and thus mark the position of the pedestals with 

paint color. 

• This procedure can be carried out in different ways, but always in multiples of 600 mm. 

• It is often advisable to trace the surface with a suitable anti-dust varnish, usually vinyl or polyurethane. This serves to fix the concrete surface 

of the slab and prevent accumulation of dust. This varnish is essential when the floor is to be used for air conditioning. This varnish is essential 

when the subfloor is to be used for air conditioning. To ensure that the concrete slab is painted correctly, it must be thoroughly cleaned. After its 

application is advisable to let the varnish dry for a day at least. The procedure of varnishing will be faster and more efficient if done before the 

installation system is installed. It is necessary to ensure that the anti-dust varnish is compatible with the adhesive used to attach the supports. 

Any dirt or dust appeared of the work in the floor can be removed using a vacuum cleaner. 

assembly sequence 

working procedure 

Working procedure 

1. The correct assembly sequence is: 

2. Check the status of progress of the construction site. 

3. Check the installation’s design follows the lines of the tracing. 

4. Install high technical floor. 

During the installation procedure is necessary: 

• Decide the best assembly sequence for any interior wall or false ceiling. 

• Limit access to the area. If adhesives are used for fixing the panels to the structure, the panels should not be stepped on at least 48 hours after 

the placement has been completed. 

• Maintaining access to the building site and the building where the floor is being installed free of obstacles, so that materials can be unloaded 

near the place or lifting equipment. 

• Maintain the horizontal access to the area and free obstacle lifting devices to facilitate transportation between pallets. 

• Ensure clear routes for trucks of pallets to transport materials for the zone can be efficiently carried out. 

• Stipulate by contract the features and use of lifting devices for vertical transport. 

• The raised technical floor should be formally approved as soon as it has been installed in each individual environment, before any protection and 

coating are applied and in any case before any other operation by the employees of the installation. 

32

33 

general site conditions 


The in-situ inspection allows that the general conditions of the place, the dimensions of the installation area, floor level, and / or correspondence from 

the planimetry 

To gather any additional information and useful details for proper installation, in-situ inspection must be performed by authorized personnel from the 

workplace, including: 

• Customer. 

• Director of operations. 

• Foreman of the place. 

• Staff butech. 

required information 

You need the following information: 

• The structure and shape of the perimeter walls. 

• A clear definition of the devices used to transport between building floors (e.g. trucks, road trains, etc.).. 

• The method used to download material (crane, tower crane, forklift ...) and the work involved. 

• The method of transport to be used to transport material within the installation area (crane, hoist, etc.).. 

• The dimensions and sizes must be compatible with the methods of transportation. 

• The height of the floor must be the indicated on the final draft. 

• Predisposition of an area for collecting material to dispose. 

• The presence of pipes that alter the hygrothermal parameters.It is recommended to isolate all sources of heat and provide an adequate 

ventilation system fitted with bars to ensure constant environmental conditions. 

• The condition of the construction operations of the wall. All wall construction must be completed at least 60 days prior to installation; the 

activities of other operators should be completed at least 30 days prior to installation. 

• The condition of the installation of windows and doors frames. The sizes and dimensions must be compatible with the transport devices when 

using a crane. 

• The condition of the concrete slab. 

• Compatibility with anti-dust products (if applicable) with the adhesive glue used to attach the pedestals. 

general site conditions 

• The state of the place of work of construction. 

• The construction zone should be cleared of all materials of access and to be clean before starting the installation. No worker or installer that is not 

one of those who work in installing the floor should have access to the area. 

• Distribution of service. All service installations must comply with the design of the floor and take into account the overall dimensions of all 

components. 

• Specifications related to the installation of the floor level. The floor level of access must be clearly indicated by the Director of Operations. The 

floor level compatibility with any eventual external constraint must be defined before starting the installation, all restrictions must be clearly 

communicated in the installation contract. 

• The presence of transport routes for the relocation of material.

general storage conditions 


• The environments where technical raised fl oor is to be installed must be checked beforehand to ensure their suitability. 

• Recommended parameters are: 

• The Environment should be dry and have sealed windows and door frames. 

• The level of moisture and temperature of storage should comply with the specifi cations described on the packaging. 

• The packaging must be handled with appropriate means of transport, such as pallet, etc… 

• It is not advisable to stack the box. 

• The packaging should be protected from impacts. 

• Store away from heat sources. 

• Store near the area in which to settle the fl oor. 

• Do not unpack the materials unless strictly necessary. When unpacking, be careful when handling components to avoid damage and to ensure 

traceability. 

• Follow the manufacturer’s instructions that are on the packing. 

Pallet of 60x120 with cardboard protection. 

Average height 120m 

Pallet of 60x120 with cardboard protection. 

Average height 120m 

The pallets can be stacked and transported by truck 

standar forklifts or pallet trucks. YES NO 

34

35 

installation of fi nishes of perimeter, steps and ramps 

installation of fi nish of perimeter 

The fi nish on the perimeter, where no spikes against a wall, made of chipboard covered with tape on both sides of melanin, closes the perimeter area is 

visible and can be placed with a metal in an “L”. In some cases, for example, when the diff erence in height between the fl oors is less than 17 cm, can also 

be used as a step. 

When you set the position where the steps are to be installed, it is necessary to remove the pedestals 4.5 cm. and align with the axis of the panels. At 

this point, place the board that acts as a lift against the axis of the panels and adjust it to the slab using screw caps and supports. 

Perimeter boards are installed at the same height as the fl oor have an aluminum corner that can be easily fi xed with wood screws and cover the 

thickness of the board itself and complete it from an aesthetic standpoint.

installation of steps 

The step makes up for any difference in height between two floors. It is made of wood for carpentry boards with a finish with edges of black rubber no 

slippery. 

You need a space of 30 cm. for thread pattern with an average height between the strips of 17 cm. (Lift) according to the criteria of construction. The 

latter figure can, of course, be modified according to the required height. Once the position has been established where the steps are to be installed, it 

is necessary to remove the pedestals 4.5 cm. and align with the axis of the panels. 

At this point, place the board that acts as a lift against the axis of the panels and set it to the slab with supports, using screw caps. Using screw caps also, 

to support the step against the board and adjust the step. 

installation of ramps 

It is made of a wooden inclined surface for boards of carpentry with edges finished with black rubber non-slip and a galvanized steel frame. A gradient 

of 8% is recommended according to the criteria of construction. 

This figure may, of course, be modified according to available space. Once the position has been established where the ramp will be installed, it is 

necessary to remove the pedestals 4.5 cm. and align with the axis of the panels and adjust to the exact height of the raised floor. 

The ramp is to fixed to the slab using plug screws and supports. Using plug screw also, fix the junction section of aluminum between the ramp and slab. 

36

37 

external raised access flooring 

The raised access floor (RAF) system for terraces has been specially created to provide an aesthetic solution for terraces 

containing unsightly drainage slopes. 

By building a completely flat floor over the existing terrace floor, these slopes are conveniently hidden underneath. 

Height deviations are offset with height-adjustable plots and any accumulated water is drained through open joints on the 

newly paved surface and then channelled down the terrace’s waterproofed slopes to the drain.

advantages 

• The system can be used to create a flat paved surface over sloping masonry floors with height deviations of up to 2%. Any height 

deviations over 2% will need to be corrected with mortar or with wedges. 

• The creation of an air void under the newly paved surface generates a continuous flow of air through the pavement joints, which 

prevents the build-up of condensation and also produces an insulation layer. 

• The under floor void, can also be used to house cables, pipes, etc. 

• Easy to access this space under the floor (do not use P-404 to bond tiles and plots in areas where you need to access the services 

underneath and be able to have space to work on it). 

• The cavity between the raised floor and the living area below also helps to reduce the penetration of noise into the home. 

• The system is quick to install as the tiles and supports are installed at the same time. 

• Advantages of Ston-Ker: Easy to clean, low dimensional tolerances, wide variety of finishes, hardness, etc.

39 

The external RAF is an over-raised type of pavement developed by used for terrace 

covering and external areas. This type of over-raised pavement allows flat surfaces on exterior supports that have 

slope, improving the aesthetic vision, the waterproofing and the drainage. 

It is a type of over-raised pavement with special ceramic tiles that are arranged on plastic PVC plots of adjustable 

height, so that a hollow space is determined between the support and the floor tiles. 

The elements that make up this system are as follow: 

outdoor tiles to external Raf 

ceramic pieces. 

The external RAF ceramic tiles consist of two porcelain stoneware slabs or technical porcelain stoneware by 

stuck with hot melt reactive to moisture. 

They are made with a sufficient thickness to withstand the breaking load demanded on these over-raised 

pavements. 

Thus, its main technical features are as follow: 

• Format: variable. 

• Thickness: between 20 mm and 30 mm approx. 

• Water absorption up to 9.8 kN. 

• Resistance to chemical attack: UA 

These porcelain stoneware slabs or technical porcelain stoneware by are 

manufactured with needed thickness to withstand the breaking load indicated above, which does not mean that on 

heavy shock or falls of heavy objects cannot produce the breaking of the same. 

structure of external Raf 

plots with adjustable height. 

These plots, made of weatherproof plastic, are the support on which the ceramic tile of external RAF rests. They 

determine the height of the system and width of the joint between slabs. This element consists of the following 

parts: 

• Plot base: Large diameter base that distributes the weight on the support system. 

• Adjustable height rod that allows adapting height of the plot to the needs of the pavement over-raised. 

• Head: It is where the extrernal RAF rests. It has 4 dividers that determine joints of placement of a width of 4 

mm. 

The total height of the plot can be adjusted for different adjustable heights.

plots properties 

• Manufactured by thermo-injection. 

• Colour: black. 

• Base of the material: polypropylene with mineral calcium carbonate side. 

• Technical stability (-25ºC + 120ºC). 

• Dimensional stability. 

• Mechanical average capacity to compression (up to 1,200 kg / unit). 

• Resistant to aqueous solutions of inorganic salts, acids and alkalies. 

• Resistant to most organic solvents as alcohol, esters and ketones. 

• Resistant to commercial detergents and bleach solutions. 

• Resistant to microorganisms for not being cultivation ground for these. 

• It does not punch the waterproofing sheets or thermal insulations. 

• Plots come marked with the slope to compensate (1% or 2%) and the installer will point the distinctive flange 

towards the drain. This flange determines the maximum height, which has to point towards the drain. 

• In angle or wall areas, top support flanges can be cut off to make the finishes fixing easier. 

• Not resistant to oxidizing substances as nitric or sulfuric acid and halogenated hydrocarbon solvents such as 

gasoline. 

• Finishes of surfaces which allow the installation of plots: 

- Mortar compression layers. 

- Chlorine Rubber primers. 

- Butyl fabrics. 

- Auto protected asphalt fabrics. 

- Directly on the thermal insulation (extruded polystyrene with density ≥ 25 kg/m3). 

- Sheets of PCV and TPO. 

- Folding of common brick. 

• Prohibited its installation: 

- in its entirety in facilities of animals such as pigs farms, etc. 

- in facilities where there is road traffic (cars, trucks, etc.). 

- on chippings, cellular concrete, directly on the ground and on not protected asphalt sheets. 

40

41 

installation of external Raf 

The weft of ceramic tiles is determined by the position of the plots. The external RAF slabs rest on these placed on 

the four corners of the tile, at least, although other positions may be placed depending on the format size. Plot 

consumption per m 2 depends on the chosen format. 

The plots are fixed to the support using polyurethane adhesive (P-404). Similarly, and to avoid the tiles shaking, 

they are adhered to the plot. 

This system is adapted to the needs of each customer, so in that way and from the project data, butech adapts the 

external RAF to the particularities of each project. 

This position ensures good stability to the system and allows greater flexibility in the design of the ceramic weft, 

and it can design placements with catch joint. 

The plots are to be placed on a solid support and a maximum gradient of 2%. For indoors, the support must be 

covered by a waterproof sheet, while outdoors, where no waterproofing system is required, the plots may rest 

directly on the support, if it is solid and stable, with the flap fitted directed toward the drain. 

This type of pavement in terraces avoids the need of cement mortar screeds for subsequent placement of 

cement-based tile adhesive. This system avoids the disadvantages of terraces that may arise from the traditional 

placement of direct adhesion. The problems arising from variations in temperature, structural settlements or poor 

performance of the flooring are eliminated. It also allows obtaining additional benefits as a convenient accessibility 

at any time, allowing correct possible defects in the existing waterproofing and easy start work without the need 

for highly specialized, reduced noise transmission and thermal protection of the room beneath the system due to 

the creation of an air chamber that is in constant ventilation and the joints between tile and tile 4 mm left open for 

drainage of water. 

references 

KEA SAP description height 

B80305010 100005802 basic plot 10 10 mm 

B80305011 100005803 basic plot 15 15 mm 

B80305020 100005804 normal plot 50/70 From 50 to 70 mm 

B80305021 100005805 normal plot 70/100 From 70 to 100 mm 

B80305001 100005794 ultra plot 65/100 From 65 to 100 mm 






B80305008 100005801 ultra plot 490/580 From 490 to 580 mm

dry installation fl oor 

New ceramic pavement system placed dry, without use of adhesives or joints, for indoor use. Quick 

and easy installation, accessible, recoverable, wide range of fi nishes and minimal maintenance. Quick 

come into service, once placed it is ready to transit on it. Coating for pavements of dry inside areas in 

premises of individual or collective use: 

• offi ce buildings. 

• uildings of public use (administration, culture, museums, cinemas, etc ...) 

• Shopping centers. 

• Hotels. 

• Showrooms. 

• Shops. 

Norm testing method system 

length 598+-0,2 mm 

UNE 10545-3 

width 

thickness 

598+-0,2 mm 

16+-0,2mm 

water absorption 0,10% 

UNE 10545-4 

Breaking module 

Breaking strenght 

3,87 Mpa 

3,47 kN 

Defl ection 2,5 mm 

UNE 10545-8 Linear thermal expansion 2,5837E-05 

UNE 53130 

Hardness shore (polyurethane) 

Density (polyurethane) 

Method A 92 

1210 kg/m3 44

45 

dry installation fl oor 

Because cli-Ker is a lift-up tile system, the tiles can be swiftly and easily changed if needed. 

The tiles click into place thanks to a simple 

tongue and grooved backing system. 

Close-up of how the tiles fi t together. In this way, you can gain access to the 

under-fl oor area just by lifting up a tile.

components 

The piece made in factory consists of the following: 

• Ceramic tile or porcelain of groups Blb and Bla as ISO 13006 and NF-EN 14411 of Porcelanosa Grupo. 

• Joint of polyurethane of 1 mm wide available in gray. 

• Base of polyurethane two-component rigid with cracks in the 4 corners shaped blade. 

Additional elements for placement are: 

• Pieces of union, locks in the form of blade of 5 mm height in polyurethane. 

• Pieces of regulation or compensation; rises and plugs of polyurethane, for leveling of the system. Thicknesses of 0.5 - 1 mm for the rises and 5 

mm for the plugs. 

• Leveling sheet viscoelastic and acoustic attenuation. 

Cli-ker n piece 598x598 mm. 

Cintex 

Plug . 0,5 mm high 

Levelling sheet 

Catches. 5 mm high 

Plug. 0,5 - 1 mm high. 

46

advantages 

• Quick and easy installation. 

• Clean. 

• Accessible. 

• Reusable. 

• Wide range of finishes. 

• Minimum maintenance. 

• Quick come into service, once placed it is ready to 

transit on it 

references 

SAP KEA description 

100096030 B81200209 alza cli-ker n 0,5mm 

100096031 B81200207 alza cli-ker n 1mm 

100096038 B81200208 taco cli-ker n 5mm 

100102785 B81200228 traba cli-ker n esp 5mm 

100103280 B15901003 lámina nivelacion cli-ker n (9mt2 )

49 

installation 

foregoing considerations 

• The support must be dry, free of dirt, construction debris or irregularities. 

• Check that the irregularity does not exceed 1.5 mm every rule of 2 m. The accumulated irregularity shall not exceed the deflection of the piece. 

There will be a previous rethink taking as origin the intersection of 2 offset axis. It will be previously installed all the pavement with locks of 5 

mm high. 

• There will be a taking of levels later and a visual inspection verifying that the pavement is firm, smooth and without lipping of tiles. It is possible 

the devasting of the base of polyurethane for surface leveling. 

• It must be left a perimeter joint of 0,5 cm, which will be hidden once placed the skirting board. 

• In addition to the components supplied for placement, we must have pliers, cutter, machine of ceramic cutting and rubber mallet. 

installation steps 

• First of all, you must check that the bracket fulfills the minimum requirements to put the cli-ker n described above. 

• From that moment on you’ll have to follow next steps: 

Step 1: 

We cover the area to be paved with leveling 

sheet. 

Step 2: 

Use Cintex to seal the joints between sheets. 

Step 3: 

Fix the catch on the piece that is going to be laid. 

Then we put the piece on the levelling sheet 

placed on the floor.

Step 4: 

Repeat the process with the help of a rubber 

mallet to fi t the pieces until covering all the area. 

Step 5: 

Use a level to place all the pieces appropriately. 

Plots are put on the catches to help levelling the 

fl o o r. 

Step 6: 

Close to walls or columns, catches should be cut 

with a cutter or pliers, to join pieces and level 

them with that wall or column. 

Step 7: 

In case that it is required cutting the pieces, we 

will use a ceramic cutting machine. 

Once the piece is marked with ceramic cutting 

machine, in case of being the buttons of ceramics 

on the optimistic side, we will review the 

trimmings with a radial provided that necessary, 

then through a dry knock we split the piece. 

50

51 

Step 8: 

When cutting the piece, we will lose the 

mechanized of the corner in which to place 

the lock. 

For these purposes we will use some plugs of 

polyurethane, placing as many as necessary, 

fi tting and sticking them on the basis of 

polyurethane. 

* For the installation of screens on the system, 

it will be used a plug of polyurethane for proper 

fi xation, protecting the ceramics with the same.

How to get a budget of a butech system? 

• Come to one of our stores/ distributors, where you will be attended by our professionals, who will show you the products that best suit your needs. 

• To provide you with the best service, you should provide us the plans of the project and fi ll a study sheet customized to your product. 

• Once delivered the plans and the sheet correctly completed, from the Technical Deptartment of butech, a fi rst budget will be done. 

• In less than 15 days, the same professional who attended you will deliver the budget. 

• In case of acceptance, and if you wish, you will receive the visit of one of our technicians for the preparation of the fi nal budget.

57 

spain showrooms 

A CORUÑA 

A CORUÑA - SUMINISTROS VIA-MAR 

Avda. Finisterre, 11. T: 981 279 431 

BETANZOS - SUMINISTROS VIA-MAR 

Avenida Fraga Iribarne, s/n. T: 981 772 190 

FERROL - NEIRA & ORTEGAL S.L. 

Carretera Catabois, 258. T: 981 326 532 - F: 981 324 951 

ORTIGUEIRA - NEIRA & ORTEGAL S.L. 

Carretera C-642 s/n, Cuiña. T: 981 400 880 - F: 981 400 883 

SANTIAGO DE COMPOSTELA -PORCELANOSA 

General Pardiñas, 13-Bajo. T: 981 569 230 

SANTIAGO DE COMPOSTELA - JOSÉ OTERO 

Rua Clara Campoamor, 13-15 (Montouto)- Teo 

T: 981 509 270 - F: 981 819 334 

SANTIAGO DE COMPOSTELA - PORCELANOSA 

Pol. Comercial Costa Vella s/n. T: 981 897 595 F:981 530 901 

ÁLAVA 

VITORIA-GASTEIZ - JORGE FERNÁNDEZ 

Los Herrán, 30. T: 945 254 755 - F: 945 259 668 

VITORIA-GASTEIZ - JORGE FERNÁNDEZ 

Polígono Jundiz. Paduleta, 53. T: 945 244 250 - F: 945 229 321 

ALBACETE 

ALBACETE - PORCELANOSA 

Avda. Gregorio Arcos, 32 (Polígono Campollano) 

T: 967 243 658 - F: 967 193 465 

VILLAROBLEDO - OLIVARES MATERIALES DE CONSTRUCCION 

Avda. Reyes Católicos, 168. T: 967 138 105 - F: 967 138 023 

ALICANTE 

ALICANTE - PORCELANOSA 

Pol. Las Atalayas, Parcela VI. Calle del Franco. 

T: 965 109 561 - F: 965 106 965 

ALTEA - MATERIALS CONSTRUCCIÓ ROCA 

Avda. de la Nucia,17. T: 965 841 507 

BENISSA - HIJOS DE JUAN RIBES 

Avda. de la Estación, 2. T: 965 730 419 

CALPE - HIJOS JUAN RIBES 

Avenida Ejércitos Españoles, Edificio Apolo VII, Local 10. 

T: 965 839 105 

DENIA - LLACER INSTALACIONES Y SERVICIOS 

Pedreguer 10-12. T: 965 781 635 - F: 965 789 821 

ELCHE - PORCELANOSA 

Avda. Alicante, 105 T: 966 610 676 - F: 966 610 700 

JAVEA - AZULEJOS JAVEA 

C/Liverpool, 4. T: 965 791 036 

LA NUCIA - ELDECO FLORENCIO CABALLERO 

Carretera Benidorm-La Nucia, km 9. (Complejo Trópico). 

T: 966 874 360 

SAN JUAN - PORCELANOSA 

Carretera Valencia, km 88. T: 965 656 200 - F: 965 655 644 

TORREVIEJA - PORCELANOSA 

Avda. Cortes Valencianas, 58 Esq. Crucero Baleares. 

T: 966 708 445 - F: 965 718 722 

ALMERÍA 

ALMERÍA - PORCELANOSA 

Avenida Mediterráneo, 2º tramo. T: 950 143 567 - F: 950 142 067 

EL EJIDO - PORCELANOSA 

Ctra. N-340, km. 411. T: 950 483 285 - F: 950 486 500 

VICAR - PORCELANOSA 

Centro Comercial Viapark, Parcela 1. T: 950 325 575 - F: 950 338 651 

ASTURIAS 

OVIEDO- PORCELANOSA 

Pol.Espíritu Santo C/ Dinamarca s/n. T: 985 791 526- F: 985 985 963 

ÁVILA 

ÁVILA - PAVIMARSA 

Pol. industrial Vicolozano - Parcela 2. T: 920 259 820 - F: 920 259 821 

BADAJOZ 

MÉRIDA - PORCELANOSA 

Avenida Reina Sofía, 8. T: 924 330 218 - F: 924 330 315 

BADAJOZ - GALLERY CERAMIC 

Carretera N-V Madrid-Lisboa, km 399. T: 924 229 144 - F: 924 229 143 

AZUAGA - CORVILLO VERA 

Pol. Industrial Parcela 5. T: 924 892 579- F: 924 890 688 

LLERENA - CERAMIC 

C/ Convento Santa Isabel, 2 Local Comercial. T: 924 108 318 

BARCELONA 

L’HOSPITALET DE LLOBREGAT - PORCELANOSA 

Ciències, 65. Gran Vía l´Hospitalet. T: 932 642 500 - F: 932 007 036 

CALAF - PLANELL 

Ctra. Manresa Km.31 . T: 938 698 750 - F: 938 600 181 

CANOVELLES - COMERCIAL MAESTRO CANET 

Pol. Can Castells, nau 7-8. T: 938 466 568 - F: 938 409 216 

MANRESA - PRAT MATERIALS I MAQUINARIA 

C/ Mossen Jacint Verdaguer, 26. T: 938 741 903 - F: 938 741 903 

NAVAS - PRAT MATERIALS I MAQUINARIA 

C/ De Mujar, 52. T: 938 204 033 - F: 938 204 098 

PINEDA DE MAR - AMARGANT PINEDA 

Santiago Rusiñol, 96. T: 937 671 416 - F: 937 670 894 

SABADELL - CASANOVA 

Avda. Rafael Casanova 24 T: 937 481 015 - F: 937 274 834 

ST. BOI DE LLOBREGAT - GARRO 

Ctra. Sta. Creu de Calafell, km. 10,7. T: 936 545 952 - F: 938 400 620 

ST. FRUITOS DE BAGÉS - CASANOVA 

Ctra. De Manresa a Berga Km. 1. Naus 2-7. 

T: 938 770 625- F: 938 776 530 

ST. PERE DE RIBES - SUMCO 

Ctra. De Barcelona C-246 Km, 42,4 T: 938 933 016 - F: 938 741 066 

SANT POL - AMARGANT SANT POL 

Passeig Parc,1. T: 937 600 112 - F: 937 600 411 

TARADELL - JODUL 

Ctra. de Vic, Km 5,8. T: 938 800 800 - F: 938 126 054 

TERRASA - CASANOVA 

Avda Can Jofresa, nau 4-5. Cant Ptge. Marie Curie 

T: 902 934 094 - F: 902 934 099 

TORELLÓ - JOAN DOT 

C/ Ter, 50. T: 938 504 646 - F: 938 504 286 

VILANOVA DEL CAMI - PLANELL 

Ctra. Vilafranca 108-111. T: 938 060 240 - F: 938 060 239 

VILLAFRANCA - SUMCO 

Pol. Ind. Domenys II. Avda. Tarragona 136. 

T: 938 933 066 - F: 938 936 004 

BURGOS 

MEDINA DE POMAR - CERÁMICA DE LAS MERINDADES 

Avda. Bilbao, 11. T: 947 192 081 - F: 947 192 082 

MIRANDA DE EBRO - JORGE FERNANDEZ 

Camino Fuente Basilio, s/n. T: 947 323 351 - F: 947 314 589 

BURGOS -BIGMAT FONTECHA 

Alcalde Martín Cobos, 15. Nave 5 y 6. T: 947 483 902 - F: 947 483 941 

CÁCERES 

CÁCERES - PORCELANOSA 

Avda. Juan Pablo II, 130. T: 927 236 337 - F: 927 236 205 

MORALEJA - BIGMAT CAYUELA 

Avda. Extremadura, 26. T: 927 515 198 - F: 927 147 266 

PLASENCIA - ALICATADORES ROMU S.A. 

Avda. del Valle, 59. T: 927 426 493 - F: 927 426 495 

CÁDIZ 

EL PUERTO DE SANTA MARíA - PORCELANOSA 

Pol. El Palmar. Carretera Madrid-Cádiz, km 653,2 . 

T: 956 540 084 - F: 956 872 464 

ALGECIRAS - PORCELANOSA 

Ctra. de Málaga, km 109. T: 956 635 282 - F: 956 635 285 

JEREZ DE LA FRONTERA - PORCELANOSA 

Carretera N-IV. Parque Empresarial, parcela D1. 

T: 956 187 160 - F: 956 302 904 

OLVERA - ALMECOR 

C/ Llana, 47. T: 956 120 776 - F: 956 120 776 

SAN FERNANDO - PORCELANOSA 

Polígono Tres Caminos, s/n. T: 956 592 360 - F: 956 884 677 

UBRIQUE - DOCURRI 

C/ Fernando Quiñones, 1. T: 956 461 838 - F: 956 460 384 

VILLAMARTIN - AZULGRIF 

C/ Rosario, 9. T: 956 730 687 - F: 956 730 911 

CANTABRIA 

SANTANDER - PORCELANOSA 

Avenida Parayas, s/n. T: 942 352 510 - F: 942 352 638 

TORRELAVEGA - PORCELANOSA 

Boulevard Demetrio Herrero, 1. T: 942 835 026 - F: 942 881 787 

CASTELLÓN 

CASTELLÓN DE LA PLANA - PORCELANOSA 

Asensi, 9. T: 964 239 162 - F: 964 238 930 

VILLARREAL - PORCELANOSA 

Ctra.Vila-real - Puebla de Arenoso (CV- 20) Km. 0,7 

T: 964 506 800 - F: 964 525 418 

VINAROZ - PORCELANOSA 

Carretera N-340, km 1.050,1. T: 964 400 944 - F: 964 400 650 

CEUTA 

CEUTA - BAEZA. 

Ampliación muelle de Poniente, 96. T: 956 511 312 - F: 956 511 309 

CIUDAD REAL 

CIUDAD REAL - PORCELANOSA 

Carretera de Carrión, Km.1. T: 926 251 730 - F: 926 255 741 

ALCAZAR DE SAN JUAN - PORCELANOSA 

Corredera, 56. T: 926 546 727 - F: 926 546 727 

TOMELLOSO - PORCELANOSA 

Avda. de los industriales, parcela 9. 

T: 926 529 206 - F: 926 529 207 

CÓRDOBA 

CÓRDOBA - PORCELANOSA 

Ctra. Nacional IV Km.404. Pol. de Torrecilla. 

T: 957 760 024 - F: 957 760 123 

CASTRO DEL RIO - JOSE SANCHEZ CARRETERO 

Ronda Vieja Salud, 68. T: 957 372 775 - F: 957 372 775 

LUCENA - FRAPECO DECO S.L. 

Ejido Plaza de Toros. T: 957 509 334 

POZOBLANCO - ACAIÑAS CABRERA 

Ctra. pozoblanco-Alcaracejos Km 3,3 

T: 957 772 999- F: 957 131 170 

VILLA DEL RIO - JUAN PRIETO E HIJOS S.L. 

Ctra. Bujalance, s/n T: 957 177 693 - F: 957 177 335 

CUENCA 

CUENCA - PORCELANOSA 

Hermanos Becerril, 6 bajo. T: 969 233 200 - F: 969 234 475 

CASAS DE HARO - MAT. CONST. MARTINEZ ORTEGA 

C/ Dos de Mayo, 28. T: 969 380 708 - F: 969 380 708 

TARANCÓN - VICENTE DE LOS RIOS S.A. 

Avda del Progreso, 19. T: 969 321 323 - F: 969 321 334 

VILLANUEVA DE LA JARA - ALMACENES PAÑOS S.L. 

Camino de Rubielos, 8. T: 967 498 000 - F: 967 498 000 

GIRONA 

BLANES - BRECOR SL 

Ctra.Tordera,79. Blanes. T: 972 336 062 - F: 972 358 482 

CORNELLA DEL TERRI - OLIVERAS 

Ctra. De Girona a Banyoles Km. 12,8. 

T: 972 594 131 - F: 972 594 552 

ESCLANYÀ-BEGUR - MATERIALES CREIXELL 

C/Palafrugel Regencos P.I. Riera Esclanya, 1. 

T: 972 300 628 - F: 972 610 772 

FIGUERES - OLIVERAS 

Ctra. N-II Km. 759. T: 972 672 259 - F: 972 672 255 

LES PRESSES - OLIVERAS 

Pol. Ind. Les Presses. Parcel.la 20. 

T: 972 694 704 - F: 972 693 003 

PALOL D’ONYAR-QUART - OLIVERAS 

Ctra. Comarcal C-250 Km. 4,3. T: 972 468 119 - F: 972 468 123 

GRANADA 

ARMILLA - TECMACER 

Avenida San Rafael. (Junto Sprinter). 

T: 958 253 081 - F: 958 183 367 

GUIPÚZCOA 

SAN SEBASTIÁN - JORGE FERNÁNDEZ 

Polígono Belartza. Fernando Múgika, 15. 

T: 943 376 966 - F: 943 376 841 

HUELVA 

HUELVA - PORCELANOSA 

Ctra. Tráfico Pesado, s/n Pol. La Paz. 

T: 959 543 600 - F: 959 234 652 

HUESCA 

FRAGA - BERGES CENTRO COMERCIAL 

Avda. Aragón, 70. T: 974 471 439 - F: 974 471 439 

HUESCA - PORCELANOSA 

Pol. Sepes. C/ Ronda la Industria 1-3 nave C. 

T: 974 242 738 - F: 974 242 676 

ILLES BALEARS 

PALMA DE MALLORCA - PORCELANOSA 

Gran Via Asima, 21 Pol. Son Castelló. 

T: 971 430 667 - F: 971 297 094 

INCA (MALLORCA)- PORCELANOSA 

C/Pagesos s/n. Pol. Inca. T: 971 507 650 - F: 971 507 656 

LLUCMAJOR (MALLORCA) - MAGATZEM SES FORQUES 

C/ Doctor Fleming, 10. T: 971 662 114 - F: 971 662 816 

SOLLER- CÁN SOLER 

c/ del Mar,193. T: 971 630 219 

MANACOR- GALMES 

c/ Via Palma. T: 971 554 502 

CALA D´ OR- MACODOR 

Ctra. Calonge-Cala Dór. T: 971 658 210 

ANDRAITX - TUCASA 

C/ Habana. T: 971 136 476 

SANT ANTONI DE PORTMANY (IBIZA)- PORCELANOSA 

Pol. Monte Cristo, s/n. Ctra. Ibiza. T: 971 317 292 - F: 971 317 293 

JAÉN 

JAÉN - PORCELANOSA 

Polígono Olivares. Carretera Bailén-Motril, km 323. 

T: 953 280 757 - F: 953 284 035 

ALCALA LA REAL - PAVIMENTOS AZUGRISA 

Polígono Ind. Fte. Granada.Vial II. T: 953 582 963 

CAMPILLOS DE ARENAS - HNOS. MESA QUESADA 

Ctra. Casablanca, s/n. T: 953 309 523 

HUELMA - VIFERSAN S.L. 

C/ Virgen de la Fuensanta, 61. T: 953 391 413 

LINARES - HERNÁNDEZ GÁMEZ S.L. 

Ctra. Torreblascopedro, s/n. T: 953 693 423 - F: 953 693 444 

ÚBEDA - HERNANDEZ GAMEZ 

Avenida de la libertad, 88. T: 953 795 168 - F: 953 795 168 

VILLACARRILLO - MAT. CONST. Y SAN. HIJOS MARTIN SANCHEZ 

C/ José Rodero Mataran, 53. T: 953 454 167 

LA RIOJA 

LOGROÑO - RIOJACER 

Avenida de Burgos, 43-45. T: 941 286 021 - F: 941 202 271

LAS PALMAS 

LAS PALMAS DE GRAN CANARIA - PORC. Y PAV. CANARIOS 

Avenida Mesa y López, 63. T: 928 472 949 - F: 928 472 944 

LEÓN 

SAN ANDRÉS DE RABANEDO - PORCELANOSA 

Ctra León-Astorga, km 3,5. - San Andrés de Rabanedo - 

T: 987 801 570 - F: 987 801 475 

LLEIDA 

EL PONT DE SUERT - PRETENSADOS RIBERA 

Ctra. N-230 Km. 124,5. T: 973 690 063 - F: 973 690 400 

LA SEU DÚRGEL - MATERIALS PIRINEU 

Ctra. de Lleida, 28. T: 973 351 850 - F: 973 353 410 

LLEIDA - PUJOL ELEMENTS 

Ctra. Tarragona Km 40. T: 973 202 350 - F: 973 203 113 

GOLMES - ARCIAR 

Avda Mediterranea, 40-44 Pol. Golparc 

T: 973 601 589 - F: 973 711 448 

VIELHA - COMERCIAL RIBERA 

Ctra. França, 40 (Mig Aran). T: 973 641 460 - F: 973 642 271 

LUGO 

FOZ - ALMACENES BAHíA 

Maestro Lugilde, 6. T: 982 140 957 

LUGO - ARIAS NADELA 

Tolda de Castilla, s/n. T: 982 245 725 

XOVE - ESTABLECIMIENTOS REY,S.L. 

Avda. Diputación, 88 T: 982 592 006 - F:982 592 071 

MADRID 

LEGANÉS - PORCELANOSA 

Avda. Recomba, 13. Pol. la Laguna Salida 53 - M50. 

T: 914 819 200 - F: 916 930 292 

ALCOBENDAS - PORCELANOSA 

Parque Río Norte. T: 916 623 232 - F: 916 624 607 

ALCORCÓN - PORCELANOSA 

Ctra. N-V, km 15,5. Parque Oeste de Alcorcón. 

T: 916 890 172 - F: 916 890 170 

MADRID - PORCELANOSA 

Ortega y Gasset, 62. Esquina Conde Peñalver. 

T: 914 448 460 - F: 914 025 111 

MADRID - PORCELANOSA 

Alcalá, 514. T: 917 545 161 - F: 917 545 555 

MÁLAGA 

MÁLAGA - PORCELANOSA 

Avda. Velázquez, 77. T: 952 241 375 - F: 952 240 092 

ANTEQUERA - PORCELANOSA 

Río de la Villa, 3. Pol. Industrial. T: 952 701 819 - F: 952 843 751 

MARBELLA - PORCELANOSA 

Avda. Ricardo Soriano, 65. T: 952 826 868 - F: 952 822 880 

MURCIA 

MURCIA - PORCELANOSA 

Avda. Juan de Borbón, s/n. Parque Comercial Thader. 

T: 968 879 527 - F:968 831 725 

CARAVACA DE LA CRUZ - PORCELANOSA 

Avenida Ctra. Granada, 20. T: 968 705 647 - F: 968 705 648 

CARTAGENA - PORCELANOSA 

C/ Belgrado. Parcela 81. Pol. Ind. Cabezo Beaza. 

T: 968 529 302 - F: 968 528 362 

LORCA - PORCELANOSA 

Ctra. de Granada, 127. Polígono Los Peñones. 

T: 968 478 130 - F: 968 470 820 

YECLA - PORCELANOSA 

Avenida de la Paz, 195. T: 968 718 048 - F: 968 718 048 

NAVARRA 

MULTIVA BAJA - MONTEJO CERÁMICAS 

Pol. Ctra. Tajonar, Calle 2, Naves 2-4. 

T: 948 239 065 - F: 948 230 503 

CINTRUÉNIGO - CERÁMICAS CECILIO CHIVITE 

Pol. Ind. s/n. Variante N-113. T: 948 811 973 - F: 948 815 249 

PAMPLONA - MONTEJO CERÁMICAS 

Navas de Tolosa, s/n. T: 948 224 000 - F: 948 226 424 

TUDELA - MONTEJO CERÁMICAS 

Ctra. Tudela -Tarazona, Pol. Centro de Servicios de Tudela. 

T: 948 848 365- F: 948 848 573 

OURENSE 

OURENSE - BLANCO QUINTAS 

C/ Nosa Señora da Sainza, 48. T: 988 391 114 - F: 988 250 413 

CARBALLIÑO - JOSE R. PITEIRA,S.L. 

Avda. Julio Rodriguez Soto,63. T: 988 271 071 - F: 988 274 780 

PALENCIA 

PALENCIA - CANTALAPIEDRA 

T: 979 706 421 - F: 979 702 652 

PONTEVEDRA 

DENA - PREFABRICADOS DENA S.L. 

Rua Galicia, 24 T: 986 743 121 

SEIXO, MARÍN - SANEAMIENTOS ROSALES 

Avenida Doctor Otero Ulloa, 1. T: 986 702 041 - F: 986 702 080 

O GROVE - PREFABRICADOS DENA S.L. 

C/Alexandre Boveda,82 T: 986 733 230 - F: 986 733 415 

LALÍN - ALMACENES CANDA, S.L. 

Calle MonserraT, 36-39 - B. T: 986 780 184 - F: 986 782 301 

MOS- BLANCO QUINTAS, S.L. 

Monte Faquiña s/n - B. T: 986 288 041 - F: 986 486 316 

VIGO - SANEAMIENTOS ROSALES 

García Barbón, 139 - B. T: 986 228 806 

SALAMANCA 

SALAMANCA - PORCELANOSA 

Pol. Villares. Ctra. Salamanca - Valladolid, km 2,5. 

T: 923 243 811 - F: 923 123 414 

SANTA CRUZ DE TENERIFE 

SANTA CRUZ DE TENERIFE - PORC. Y PAV. CANARIOS 

Avda. 3 de Mayo, 18. T: 922 209 595 - F: 922 209 596 

LOS LLANOS DE ARIDANE - AFELSA 

Las Rosas, s/n. T: 922 461 112 - F: 922 461 166 

SANTA CRUZ DE LA PALMA - AFELSA 

Abenguareme, 3. T: 922 412 143 - F: 922 420 012 

SEGOVIA 

EL ESPINAR - SEGOCER 

Carretera Madrid - La Coruña, km 64. 

T: 921 172 426 - F: 921 171 828 

SEGOVIA - SEGOCER 

José Zorrilla, 134. T: 921 444 122 

SEVILLA 

SEVILLA - PORCELANOSA 

Pol. Ind.La Negrilla. C/ Tipografía,2.(Autovía A-92 Málaga-Granada) 

T: 954 260540 - F: 954 261 391 

DOS HERMANAS - PORCELANOSA 

Parque Cial., Zona 2. Doctor Fleming, Sector 13, Parcela 3. 

T: 955 661 368 - F: 955 661 368 

LORA DEL RÍO - HERNÁNDEZ CARBALLO S.L. 

C/ Betis s/n. T: 955 800 473 - F: 955 801 439 

TOMARES - PORCELANOSA 

San Roque, s/n. Polígono El Manchón. 

T: 954 152 792 - F: 954 153 188 

SORIA 

SORIA - MAT. CONSTRUCCIÓN ODORICIO S.L. 

Polígono las Casas-II. Calles A y J, Parcela 201. 

T: 975 233 228 - F: 975 232 188 

TARRAGONA 

CAMBRILS - MONSERRATE ESTIL CERAMIC SL 

Pol. Ind. Belianes nau 5 Ctra. Cambrils-Montbrió. 

T: 977 364 900 - F: 977 364 953 

EL VENDRELL - VIUDA DE ANTONIO FONT 

C/ Valls, 12. T: 977 660 794 - F: 977 662 217 

REUS - SEGURA DISSENY SL 

Plz. Del Nen de les Oques, 8. Reus. T: 977 312 502 - F: 977 317 211 

RODA DE BARA - CONSTRUCCIONS CIURO 

Acceso a Roda de Bara Km. 1. T:977 802 951 - F:977 802 012 

VALLS - RAMÓN MAGRIÑA BATALLA 

C/ Montblanc 14. T:977 600 210 - F:977 603 302 

TERUEL 

TERUEL - GARGÓN 

Polígono La Paz, Parcela 143-149. T: 978 609 661 

TOLEDO 

TOLEDO - PORCELANOSA 

Pol.Ind.Sta. María de Benquerencia, C/del Río Marchés,123 

T: 925 232 402 F:925 232 406 

ILLESCAS - PORCELANOSA 

Ctra. A-42 Km. 32 T: 925 532 011 F:925 513 055 

VALENCIA 

ALBUIXECH - PORCELANOSA 

Avda. Mediterráneo, Parcela 6. Pol. Ind. del Mediterráneo. 

T: 96 141 7227-F: 961 401 078 

GANDÍA - PORCELANOSA 

Zona Cial. La Vital, Avda de la Vital, 43-A 

T: 962 954 105 - F: 962 965 980 

PATERNA - PORCELANOSA 

Zona Cial. Heron City, Pista Ademuz, S. 6-7 - Calle V-1. Parc.1 Sec.14. 

T: 963 160 348 - F: 963 160 599 

SEDAVÍ - PORCELANOSA 

Avenida Mediterráneo. Zona Cial. de Sedaví. 

T: 963 185 021 - F: 963 180 094 

VALENCIA - PORCELANOSA 

Colón, 56. T: 963 530 230 - F: 963 531 688 

VALLADOLID 

VALLADOLID - CANTALAPIEDRA 

Carretera de Soria A-24, km 5. T: 983 217 010 - F: 983 200 921 

VALLADOLID - CANTALAPIEDRA 

Don Sancho, 3/5. T: 983 217 921 - F:983 308 292 

VIZCAYA 

AMOREBIETA - BILBU 

Barrio Boroa, s/n. T: 946 731 158 - F: 946 733 265 

BILBAO - BILBU 

Iturriaga, 78. T: 944 113 018 - F: 944 128 637 

BILBAO - BILBU 

Alameda Recalde, 39 - 41. T: 944 218 625 - F:944 218 879 

ZAMORA 

ZAMORA - PORCELANOSA 

Avenida Cardenal Cisneros, s/n. T: 980 519 283 - F: 980 529 404 

ZARAGOZA 

ZARAGOZA - PORCELANOSA 

Autovía de Logroño, km 2. T: 976 403 131 - F: 976 300 094 


Plataforma Logística PLA-ZA. C/ Taormina, 2. 

T: 876 269 500 - F: 876 269 389 


Parque Cial. Puerto Venecia. T: 976 930 800 - F: 976 930 603 

58

59 

international showrooms 

ALBANIA 

TIRANA - ALBA CERAMICA PORCELANOSA GRUPO 

T: +355 42233817 - F: +355 42233817 

TIRANA - ALBA CERAMICA 

T: +355 48300084 - F: +355 48300084 

ALEMANIA 

ASCHAFFENBURG - KALKWERKE 

T: +49 (0) 60 213 601 62 - F: +49 (0) 60 213 602 93 

BAD SALZUFLEN - W. LINNENBECKER GmbH 

T: +49 (0) 5222 / 5301 221 - F: +49 (0) 5222 / 5301 209 

BAUTZEN - FLIESEN LEHMANN GmbH 

T: +49 (0) 3591 / 3726 32 - F: +49 (0) 351 / 8931420 

BEESKOW - BADER BAUSTOFFE & WERKZEUGE, HANDELSGESELLSCHAFT T: GmbH +49 

(0) 3366 / 417 0 - F: +49 (0) 3366 / 417 90 

BERGISCH GLADBACH - SCHMIDT RUDERSDORF GmbH & Co 

T: +49 (0) 2204 / 4007 0 771 - F: +49 (0) 3320 / 854715 

BERLIN - W. LINNENBECKER GMBH & CO. KG 

T: +49 (0) 30 / 756 888 - F: +49 (0) 30 / 756 88 756 

BERLIN - FLIESENPARADIES GLAESKE + SEFZIG GMBH 

T: +49 (0) 30 650 737 0 - F: +49 (0) 30 650 737 34 

BERLIN - BERLINER FLIESENMARKT GMBH 

T: +49 (0) 30 326 725 10 - F: +49 (0) 30 326 725 58 

BOFFZEN - HERMANN BACH GMBH & CO. KG 

T: +49 (0) 5271 / 955 251 - F: +49 (0) 5271 / 955 200 

BOTTROP - W. LINNENBECKER GMBH & CO. KG 

T: +49 (0) 2041 / 7958 13 - F: +49 (0) 2041 / 7958 10 

BRUCHSAL - TAXIS - BRUCHSAL 

T: +49 (0) 72 518 005 0 - F: +49 (0) 72 518 005 40 

BURGSTÄDT - FLIESEN THOMAS FLIESENGROßHANDEL GMBH 

T: +49 (0) 3724 / 1856 0 - F: +49 (0) 3724 / 1856 70 

CRAILSHEIM - TAXIS - CRAILSHEIM 

T: +49 (0) 7951 301 0 - F: +49 (0) 7951 301 100 

DORTMUND - W. LINNENBECKER GMBH & CO. KG 

T: +49 (0) 231 / 562 090 22 - F: +49 (0) 231 / 562 090 88 

ELTERLEIN - FLIESNHAUS MULLER 

T: +49 (0) 37349 / 7305 - F: +49 (0) 37349 / 6093 

ERFURT - FLIESENZENTRUM ERFURT 

T: +49 (0) 361 427070 - F: +49 (0) 361 4270777 

ERKRATH - W. LINNENBECKER GMBH 

T: +49 (0) 211 / 92503 19 - F: +49 (0) 211 / 92503 34 

FRANKFURT - J. N. KÖBIG GMBH - FRANKFURT 

T: +49 (0) 69 959 645 5 - F: +49 (0) 69 959 645 79 

FREIBURG - GÖTZ & MORIZ GMBH 

T: +49 (0) 76 145 180 - F: +49 (0) 76 145 711 2 

FULDA - OSWALD KERAMIK UND STEIN GMBH 

T: +49 (0) 66 194 151 0 - F: +49 (0) 66 194 151 40 

GERA - BAUSTOFFE GEBR.LÖFFLER GMBH 

T: +49 (0) 365 430 701 9 - F: +49 (0) 365 430 701 4 

GÖRLITZ - FLIESEN-PEDERSEN GMBH 

T: +49 (0) 3581 / 402809 - F: +49 (0) 3581 / 409166 

HAMBURG - LURUP - CROONEN FLIESENHANDEL GMBH 

T: +49 (0) 40 / 83383 377 - F: +49 (0) 40 / 83383 301 

KARLSTADT - FLIESEN GEHRET 

T: +49 (0) 93 539 731 0 - F: +49 (0) 93 539 731 26 

KEHL / RHEIN - TAXIS - KEHL 

T: +49 (0) 78 519 383 16 - F: +49 (0) 78 519 383 20 

KOBLENZ - J. N. KÖBIG GMBH - KOBLENZ 

T: +49 (0) 26 198 169 20 - F: +49 (0) 26 198 169 10 

KRANICHFELD - MÜHL 24 - KRANICHFELD 

T: +49 (0) 36 450 330 - F: +49 (0) 36 450 332 89 

LÖBNITZ - SACHSENKERAM GBR 

T: +49 (0) 34208 / 7400 - F: +49 (0) 34208 / 7400 

LÜBECK - HEINRICH´S FLIESENMARKT 

T: +49 (0) 451 8966693 - F: +49 (0) 451 8973494 

MAINZ - J. N. KÖBIG GMBH - MAINZ 

T: +49 (0) 61 313 942 27 - F: +49 (0) 61 316 942 75 

MESCHEDE - W. LINNENBECKER GMBH & CO. KG 

T: +49 (0) 291 / 952 82 21 - F: +49 (0) 291 / 952 82 82 

MÜNCHEN - CERAMICAS OHG 

T: +49 (0) 89 318 280 0 - F: +49 (0) 89 318 280 20 

MÜNSTER - W. LINNENBECKER GMBH & CO. KG 

T: +49 (0) 251 / 979 12 21 - F: +49 (0) 251 / 979 1220 

NORDHAUSEN - HERMANN BACH GMBH & CO. KG 

T: +49 (0) 3631 / 633 126 - F: +49 (0) 3631 / 633 143 

NÜRNBERG/HAFEN - HEINRICH CHRIST GMBH & CO. KG 

T: +49 (0) 91 164 318 0 - F: +49 (0) 91 164 318 50 

PLAUEN - MATTHIAS SCHUH 

T: +49(0) 374 1203 881 

POTSDAM OT FAHRLAND - KERANA KERAMIK - GMBH 

T: +49 (0) 33208 / 547 16 - F: +49 (0) 33208 / 547 15 

RADEBEUL - FLIESEN EHRLICH & CO. GMBH 

T: +49 (0) 351 / 89314 10 - F: +49 (0) 351 / 89314 20 

REUTLINGEN - TAXIS - REUTLINGEN 

T: +49 (0) 71 219 884 0 - F: +49 (0) 71 219 884 40 

RONNENBERG / EMPELDE - W. LINNENBECKER GMBH & CO. KG 

T: +49 (0) 511 / 438 90 36 - F: +49 (0) 511 / 438 90 49 

SCHRAMBERG - SULGEN - ARMBRUSTER GMBH 

T: +49 (0) 7422 28008-0 - F: +49 (0) 7422 28008-20 

STUHR-MOORDERCH - NORBERT BANG 

T: +49 (0) 42 156 591 78 - F: +49 (0) 42 156 591 79 

STUTTGART - TAXIS - STUTTGART 

T: +49 (0) 71 189 003 121 - F: +49 (0) 71 189 003 104 

VÖLKLINGEN - NIEDERER GMBH 

T: +49 (0) 68 989 802 21 - F: +49 (0) 68 989 802 30 

VS-SCHWENNINGEN - TAXIS - SCHWENNINGEN 

T: +49 (0) 77 206 927 0 - F: +49 (0) 77 206 927 35 

WEINSBERG - BSF BAU CENTER GMBH 

T: +49 (0) 71 349 130 - F: +49 (0) 71 349 131 00 

WIESBADEN-BIEBRICH - J. N. KÖBIG GMBH - WIESBADEN 

T: +49 (0) 611 27810 - F: +49 (0) 611 25674 

ZWETHAU - GRAMER GMBH 

T: +49 (0) 3421 / 7327 18 - F: +49 (0) 3421 / 7326 73 

ANGOLA 

LUANDA-PORCELANOSA ANGOLA 

T: +244931173551 - F: +244222372374 

ARABIA SAUDÍ 

JEDDAH - MANART AL ANDALOS EST 

T: +966 2 629 3402 - F: +966 2 629 3416 

RIYADH - MANART AL ANDALOS EST 

T: +966 1 282 1500 

ARGELIA 

ALGER - NOVACASA 

T: +00213 2121 1939 - F: +00213 2121 1939 

ARGENTINA 

BUENOS AIRES - NESTOR O. MACAGNO 

T: +54 11 477 630 08 - F: +54 11 477 630 08 

BUENOS AIRES - BLAISTEN S.A. 

T: +54 11 463 620 00 - F: +54 11 463 614 86 

MAR DEL PLATA - IMEPHO S.A. 

T: +54 02 234 813 827 - F: +54 02 234 813 827 

MENDOZA - VICTOR JOSE GULLO 

T: +54 26 143 142 00 - F: +54 26 143 142 00 

ARMENIA 

YEREVAN - SACO & ARARAT-SALON BOMOND 

T: +37 410 55 08 99 - F: +37 410 51 75 81 

AUSTRALIA 

OCEANIA: 

AUSTRALIAN REPRESENTATIVE - AUSTRALIAN FACTORY REPRESENTATIVE 

T: +61 8 81186244 - F: +61 8 8118 6220 

NEW SOUTH WALES: 

NEWCASTLE WEST - EARP BROS 

T: +61 2 4925 4555 - F: +61 2 4929 4932 

SYDNEY - EARP BROS 

T: +61 2 4962 5500 - F: +61 2 9410 2011 

QUEENSLAND: 

BRISBANE - TILESCOPE IMPORTS 

T: +61 7 3371 5777 - F: +61 7 3371 5133 

SUNSHINE COAST - BRISBANE - ACE STONE & TILES 

T: +61 7 5493 3344 - F: +61 7 5493 3117 

BRISBANE - MAJER TILES 

T: +61 7 3852 4444 - F: +61 7 3852 4344 

SOUTH AUSTRALIA: 

ADELAIDE - ITALIA CERAMICS 

T: +61 8 8336 2366 - F: +61 8 8336 9016 

TASMANIA: 

HOBART - ROSSETTO TILING 

T: +61 3 6231 2931 - F: +61 3 6231 5783 

LAUNCESTON - ROSSETTO TILING 

T: +61 3 6326 4955 - F: +61 3 6326 6003 

VICTORIA: 

MELBOURNE - EARP BROS 

T: +61 3 9328 8598 - F: +61 3 9348 9996 

WESTERN AUSTRALIA: 

PERTH - CERAMO 

T: +61 8 9445 1777 - F: +61 8 9446 3127 

AUSTRIA 

GRAZ - FLIESEN TENNE 

T: +43 316 262 524 0 - F: +43 316 262 524 22 

LINZ - BEINKOFER 

T: +43 732 776 543 0 - F: +43 732 776 543 60 

SALZBURG - STURMBERGER KERAMIKAGENTUR 

T: +43 662 879 322 - F: +43 662 872 389 

AZERBAIYÁN 

BAKU - AKSESUAR PORCELANOSA GRUPO 

T: +994 12 5962548/+994 12 4973103 - F: +994 12 4474383 

BAKU - AKSESUAR INSAAT 

T: +994 12 4409970/+994 12 4403145 - F: +994 12 4403145 

BANGLADESH 

DHAKA - SAS PROGRESSIVE CO. 

T: +88-02-8813796 - F: +88-02-8713501 

BAHRÉIN 

MANAMA - AL ABBAS GALLERY 

T: +973 741 919 - F: +973 741 747 

BÉLGICA 

HEIST-OP-DEN-BERG - PGB CERAMICA NV 

T: +32 (0) 15 253366 - F: +32 (0) 15 253367 

BERMUDAS 

PEMBROKE - PEMBROKE TILE & STONE Co. LTD 

T: +441 292 8453 - F: +441 295 8453 

BIELORRÚSIA 

GOMEL - POLCAR IMPEX 

T: +375 2327 76919 - F: +375 2327 76757 

MINSK - POLCAR IMPEX 

T: +375 1721 78785 - F: +375 1721 75632 

MINSK - INTERIOR HALL DOMIART 

T: +375 1725 96026 - F: +375 1725 96212 

BOLIVIA 

SANTA CRUZ - ELEMENTO DISEÑO & ARQUITECTURA 

T: +591 3 364 7313 - F: +591 3 347 6226 

BOSNIA Y HERZEGOVINA 

BANJA LUKA - ART DECO d.o.o. 

T: +387 051 325 111 - F: +387 051 371 661 

CITLUK - BROTIS d.o.o. 

T: +387 633 21500 - F: +387 366 50950 

SARAJEVO - LUK d.o.o. 

T: +387 33 777 887 - F: +387 33 777 889 

BRASIL 

PARANÁ - CAMPO LARGO - PORCELANOSA BRASIL REVESTIMENTOS 

LTDA 

T: +55 (41) 3392 1500 - F: +55 (41) 3392 1400 

SAO PAULO - TELHANORTE - Saint Gobain 

T:+55 11 2139 9650 9655 F:+55 11 2139 9655 

BULGARIA 

BLAGOEVGRAD - NIKMAR 

T: +359 885 009 959 

BURGAS - NIKMAR 

T: +359 885 954 000 

BURGAS - ELIS G. 

T: +359 56 842 849 

PETRICH - NIKMAR 

T: +359 886 321 111 - F: +359 745 665 03 

PLOVDIV - NIKMAR 

T: +359 885 151 541 

SANDANSKI - NIKMAR 

T: +359 888 143 313 

SOFIA - NIKMAR 

T: +359 888 143 313 

SOFIA - NIKMAR 

T: +359 887 173 313 

VARNA- ELIS-GE EOOD 

T: +395 52 500 555 

CAMBOYA 

PHNOM PENH - UY HOUT MODERN CERAMIC TILES 

T: +855 23 210658 - F: +855 11 307777 

CAMERÚN 

DOUALA - NOUVEAUX AFFAIRES S.A.R.L. 

T: +237 33 92161 - F: +237 34 32917 

CANADÁ 

BRITISH COLUMBIA: 

VANCOUVER - FONTILE DISTRIBUTORS 

T: +604 683 9358 - F: +604 683 6758 

NEW BRUNSWICK: 

MONCTON - DOMINION TILE & SUPPLIES 

T: +506 857 8906 - F: +506 857 4149 

ONTARIO: 

WOODBRIDGE - STREAMLINE SALES & MARKETING INC. 

T: +905 850 1508 - F: +905 850 1509 

CHILE 

SANTIAGO DE CHILE - BUDNIK HERMANOS S.A. 

T: +562 398 0100 - F: +562 212 3058 

CHINA 

BEIJING - PO YICK BUILDING MATERIALS CO. LTD 

T: +86 10 8527 1313 - F: +86 10 6422 9976 

CHENGDU - DE HUA SANITARYWARE 

T: +86 28 8775100181 - F: +86 28 8774721681 

CHONGQUING - YAO CHENG BUILDING MATERIALS 

T: +86 23 86358360 - F: +86 23 86357182 

DALIAN - PO YICK CERAMIC TILES 

T: +86 411 8230 1911 - F: +86 411 8230 1911 

FUZHOU - PO YICK CERAMIC TILES 

T: +86 591 8805 5823 - F: +86 591 8805 5823 

GUANGZHOU - PO YICK DECORATION AND DESIGN (FAFA) 

T: +86 20 2200 8228 - F: +86 20 8252 4902 

GUANGZHOU - PO YICK DECORATION AND DESIGN (MAFO)

T: +86 20 8071 8223- F: +86 20 8701 8226 

HAIKOU - XIN HUA XIN BUILDINGS MATERIALS 

T: +86 898 6532 2417 - F: +86 898 6533 4893 

HANGZHOU - MING OU BUILDING MATERIALS 

T: +86 571 8658 2691 - F: +86 571 8658 2691 

KUNMING - BE NEW FORM BUILDING MATERIALS 

T: +86 871 466 9550 - F: +86 871 466 9550 

QUINDAO - TOLI SPACE MATERIALS 

T: +86 532 80995657 - F: +86 532 80995657 

SHANGHAI - PO YICK DECORATION AND DESIGN 

T: +86 21 6438 3735 - F: +86 21 6428 1607 

SHENYANG - PO YICK CERAMIC TILES 

T: +86 24 8563 7137 - F: +86 24 8563 7137 

SHENZHEN -PO YICK BUILDING MATERIALS (HONGHU LU) 

T: +86 755 2562 0359 - F: +86 755 2550 5297 

SHENZHEN - PO YICK BUILDING MATERIALS (BAILIMA) 

T: +86 755 8240 7728 - F: +86 755 8240 7738 

TIANJIN - OU LIN HUI BUJILDING MATERIALS 

T: +86 22 23528765 - F: +86 22 88277023 

WENZHOU - MING HOME INTERNATIONAL MATERIALS CO. LTD 

T: +86 577 8872 8111 - F: +86 577 8971 2066 

WUHAN - HENG HUI BUILDINGS MATERIALS 

T: +86 27 8388 9169 - F: +86 27 8398 4795 

XIAN - WEI YANG BAO LU SHA BUILDINGS MATERIALS 

T: +86 29 8612 2404 - F: +86 29 8612 2404 

XIANMEN - PO YICK CERAMIC TILES 

T: +86 2952 3755123 - F: +86 591 88055823 

CHIPRE 

LIMASSOL - THE ENGINEERING AND COMMERCIAL ASSOCIATION (EKA) 

T: +357 2585 4444 - F: +357 2585 4545 

COLOMBIA 

BOGOTÁ - PROSEIN 

T: +57 743 5566 

BOGOTÁ - DECORCERAMICA 

T: +57 1 625 4439- F: +57 1 615 2554 

T: +57 1 742 7690- F: +57 1 742 3983 

T: +57 1 747 0555- F: +57 1 621 1197 

CALI - DECORCERAMICA 

T: +57 2 330 1124 - F: +57 2 330 1997 

T: +57 2 668 9535 - F: +57 2 661 8063 

MEDELLIN - DECORCERAMICA 

T: +57 4 604 5888- F: +57 4 604 5888 

BARRANQUILLA - D.I.M.C.E. 

T: +57 5 300 6208 - F:+57 4 604 5888 

CONGO, REPÚBLICA DEMOCRÁTICA 

KINSHASA - SOCIETE PANACHE 

T: +243 884 1677 - F: +243 983 13893 

COREA DEL SUR 

SEOUL - T&S TRADING CO. LTD 

T: +82 2 5163123 - F: +82 2 5163009 

COSTA RICA 

SAN JOSÉ - FERNANDEZ AGUILAR S.A. 

T: +506 2222 5674 - F: +506 221 9952 

CROACIA 

DUBROVNIK - OTP DUBROVNIK 

T: +385 20 412478 - F: +385 20 311521 

POREC - SPINA 

T: +385 52 451 348 - F: +385 52 434 005 

PULA - SPINA 

T: +385 52 219 002 - F: +385 52 219 118 

RIJEKA - SPINA 

T: +385 51 741 300 - F: +385 51 741 298 

SPLIT - CREDO CENTAR 

T: +385 21 476 333 - F: +385 21 476 332 

SPLIT - SPINA 

T: +385 21 668 991 - F: +385 21 668 992 

VARAZDIN - SPINA 

T: +385 42 303 707 - F: +385 42 303 709 

ZAGREB - CREDO CENTAR 

T: +385 1 3634 369 - F: +385 1 3634 540 

ZAGREB - SPINA 

T: +385 13 492 552 - F: +385 13 492 560 

DINAMARCA 

GLOSTRUP - MOSAIKHJORNET 

T: +45 43 633 900 - F: +45 43 663 857 

ODENSE M - DANESP FLISE KOMPAGNIET APS 

T: +45 66 173 221 - F: +45 66 173 821 

COPENHAGUEN S - GENESTHO APS 

T: +45 53 354 242 

ECUADOR 

GUAYAQUIL - ARKETIP’S CA 

T: +593 422 467 52 - F: +593 422 403 96 

QUITO - ARKETIP’S CA 

T: +593 422 498 39 - F: +593 225 573 99 

EGIPTO 

EL CAIRO - MAHGOUB TRADING & IMPORTING 

T: +20 2 57 12 565 - F: +20 2 57 39 344 

EMIRATOS ÁRABES UNIDOS 

ABU-DHABI - GALAXY BUILDING MATERIALS TRADING 

T: +971 2 632 0333 - F: +971 2 632 2242 

ESLOVENIA 

LJUBLJANA - KEOR d.o.o. 

T: +386 1 542 14 86 - F: +386 1 542 14 88 

MARIBOR - KEOR d.o.o. 

T: +386 2 480 54 15 - F: +386 2 471 06 33 

ESTADOS UNIDOS 

CALIFORNIA: 

ANAHEIM - PORCELANOSA ANAHEIM 

T: +1 714 772 3183 - F: +1 714 772 9851 

SAN FRANCISCO - PORCELANOSA SAN FRANCISCO 

T: +1 415 593 7763 - F: +1 714 772 985 

SAN JOSE - PORCELANOSA SAN JOSE 

T: +1 408 467 9400 - F: +1 408 467 9410 

BEVERLY HILLS - PORCELANOSA BEVERLY HILLS 

T: +1 714 772 3183 

CONNECTICUT: 

RIVERSIDE - PORCELANOSA RIVERSIDE 

T: +1 203 698 7618 - F: +1 203 698 7619 

FLORIDA: 

MIAMI - PORCELANOSA MIAMI 

T: +1 305 715 7153 - F: +1 305 592 6999 

POMPANO BEACH - PORCELANOSA POMPANO BEACH 

T: +1 954 968 7666 - F: +1 954 968 7699 

GEORGIA: 

ATLANTA - PORCELANOSA ATLANTA 

T: +1 305 715 7153 

ILLINOIS: 

CHICAGO - PORCELANOSA CHICAGO 

T: +1 312 204 6220 - F: +1 312 204 6240 

MARYLAND: 

ROCKVILLE - PORCELANOSA ROCKVILLE 

T: +1 301 294 8193 - F: +1 301 294 8194 

NEW JERSEY: 

EAST BRUNSWICK - PORCELANOSA EAST BRUNSWICK 

T: +1 732 613 1915 - F: +1 732 613 9181 

PARAMUS - PORCELANOSA PARAMUS 

T: +1 201 712 0556 - F: +1 201 599 1520 

RAMSEY - PORCELANOSA RAMSEY 

T: +1 201 995 1310 - F: +1 201 995 1960 

NEW YORK: 

NEW YORK - PORCELANOSA NYDC 

T: +1 212 252 7370 

WESTBURY - PORCELANOSA WESTBURY 

T: +1 516 338 0097 - F: +1 516 338 0098 

TEXAS: 

DALLAS - PORCELANOSA DALLAS 

T: +1 214 377 2327 - F: +1 214 234 1340 

EL SALVADOR 

SAN SALVADOR-FERRETERIA DE LA CONSTRUCCIÓN FERCO 

T: 503 2510 8888 - F: 503 2510 8810 

ESTONIA 

TALLINN - PLAADIPUNKT 

T: +372 650 0720 - F: +372 650 0723 

FILIPINAS 

MANILA - CASA EUROPA 

T: +632 519 5818 - F: +632 553 2446 

MANILA - ADVENTURE IMPORT-EXPORT 

T: +63 2 831 8424 - F: +63 2 831 6850 

FINLANDIA 

VANTAA - LAATTAPISTE OY 

T: +358 9 878031 - F: +358 9 890832 

FRANCIA 

ALSACE ET LORRAINE: 

VENDENHEIM - PORCELANOSA STRASBOURG 

T: +33 0388 209 212 - F: +33 0388 209 107 

WITTENHEIM - PORCELANOSA MULHOUSE 

T: +33 0389 570 260 - F: +33 0389 570 261 

AQUITAINE: 

MERIGNAC - PORCELANOSA BORDEAUX 

T: +33 0556 124 848 - F: +33 0556 124 849 

BASSE NORMANDIE: 

MONDEVILLE - PORCELANOSA CAEN 

T: +33 0231 820 000 - F: +33 0231 820 019 

BOURGOGNE: 

CHENÔVE - PORCELANOSA DIJON 

T: +33 0380 588 701 - F: +33 0380 588 595 

BRETAGNE: 

BREST - PORCELANOSA BREST 

T: +33 0298 025 100 - F: +33 0298 415 401 

LORIENT - PORCELANOSA LORIENT 

T: +33 0297 875 000 - F: +33 0297 370 607 

SAINT GRÉGOIRE - RENNES - PORCELANOSA RENNES 

T: +33 0223 200 808 - F: +33 0299 369 688 

VANNES - PORCELANOSA VANNES 

T: +33 0297 460 292 - F: +33 0297 461 210 

CENTRE: 

CHAMBRAY LES TOURS - PORCELANOSA TOURS 

T: +33 0247 808 787 - F: +33 0247 808 789 

OLIVET - PORCELANOSA ORLEANS 

T: +33 0238 496 961 - F: +33 0238 496 969 

CORSE: 

AJACCIO - ART ET STYLES 

T: +33 0495 221 999 - F: +33 0495 231 547 

BIGUGLIA - ART ET STYLES 

T: +33 0495 589 898 - F: +33 0495 305 318 

FRANCHE COMTÉ: 

BESANÇON - PORCELANOSA BESANÇON 

T: +33 0381 416 363 - F: +33 0381 416 369 

HAUTE NORMANDIE: 

SOTTEVILLE LES ROUEN - PORCELANOSA ROUEN 

T: +33 0235 650 655 - F: +33 0235 650 656 

ÎLE DE FRANCE: 

ARCUEIL - PORCELANOSA PARIS PORTE D’ORLEANS 

T: +33 0149 121 257 - F: +33 0149 121 258 

COIGNIERES - PORCELANOSA COIGNIERES 

T: +33 0130 491280 - F: +33 0130 491328 

MONTIGNY - LES CORMEILLES - PORCELANOSA MONTIGNY 

T: +33 0139 311979 - F: +33 0139 311492 

VERT SAINT DENIS - PORCELANOSA MELUN 

T: +33 0160 565 747 - F: +33 0160 569 080 

LANGUEDOC - ROUSSILLON: 

NÎMES - PORCELANOSA NÎMES 

T: +33 0466 282 780 - F: +33 0466 282 781 

PÉROLS - PORCELANOSA MONTPELLIER 

T: +33 0467 503 600 - F: +33 0467 501 121 

NORD - PAS - DE - CALAIS: 

LEZENNES - PORCELANOSA LILLE 

T: +33 0320 340 340 - F: +33 0320 340 341 

PAYS DE LA LOIRE: 

BEAUCOUZÉ - PORCELANOSA ANGERS 

T: +33 0241 738 100 - F: +33 0241 733 721 

GUERANDE - PORCELANOSA LA BAULE 

T: +33 0240 607 273 - F: +33 0240 110 659 

LA CHAPELLE SAINT AUBIN - PORCELANOSA LE MANS 

T: +33 0243 236 520 - F: +33 0243 240 512 

LA ROCHE SUR YON - PORCELANOSA LA ROCHE S/YON 

T: +33 0251 241 217 - F: +33 0251 242 399 

ORVAULT - PORCELANOSA NANTES 

T: +33 0228 073 950 - F: +33 0228 073 957 

POITOU - CHARENTES: 

CHASSENEUIL DU POITOU - PORCELANOSA POITIERS 

T: +33 0549 119 787 - F: +33 0549 119 788 

PROVENCE - ALPES - CÔTE D’AZUR: 

AUBAGNE - PORCELANOSA MARSEILLE 

T: +33 0442 624 330 - F: +33 0442 624 339 

LES PENNES MIRABEAU (PLAN DE CAMPAGNE) - PORCELANOSA PLAN DE 

CAMPAGNE 

T: +33 0442 466 120 - F: +33 0442 466 129 

RHÔNE ALPES ET AUVERGNE: 

CHAMPAGNE AU MONT D’OR - PORCELANOSA LYON 

T: +33 0478 668 151 - F: +33 0478 432 003 

GEORGIA 

TBILISI - COMODIN LTD 

T: +995 32 332960 - F: +995 33001368 

GRECIA 

ATTICA - AURORA BAGNO 

T: +30 2105 594 520 - F: +30 2105 594 521 

HATZ GROUP - PORCELANA: 

ATHENS 

T: 210 810 53 30 

ATHENS 

T: 210 96 07 010 

ATHENS 

T: 210 5156 163 

ATHENS 

T: 2299063750 

LARISA 

T: 2410 619 999 

LEFKADA 

T: 2645 0 72100 

LOANNINA 

T: 26510 92735-7 

SERRES 

T: 23210 36157 

THESSALONIKI - 

T: +30 2310 752 902 - F: +30 2310 753 564 

THESSALONIKI 

T: 2310 47 47 67 

THESSALONIKI 

T: 2310 672 340 

GUADALUPE (ANTILLAS FRANCESAS) 

BAIE MAHAULT - GUADELOUPE CERAMIQUE 

T: 590 266 261 - F: 590 266 412 

SAINT BARTHELEMY - ALMA QUINCAILLERIE 

T: +590 276 494 - F: +590 276 738 

GUATEMALA 

GUATEMALA- FERRETERIA DE LA CONSTRUCCION FERCO 

T: 502 2421 9000 - F: 502 2421 9009 

GUAYANA FRANCESA 

CAYENNE - ETS HENRY LE GAC 

60

61 

T: +594 302 719 - F: +594 300 713 

HAITÍ 

PUERTO PRINCIPE - EUROCERAM 

T: +509 250 57 14 - F: +509 250 57 15 

PETION VILLE -CERAMEX 

T: +509 712 88 33 - F: +509 256 53 44 

HONG KONG 

HONG KONG - TAI YICK BUILDING MATERIALS 

T: +852 23 956 670 - F: +852 23 957 831 

HUNGRÍA 

BUDAPEST - PORCAHUNGARY KFT 

T: +36 1 237 08 78 

BUDAPEST - PALATINUS FURDOSZOBASZALONOK 

T: +36 61-430-04-17 - F: +36 1-387-91-36 

DEBRECEN -PALATINUS FURDOSZOBASZALONOK 

T: +36 52-531-476 - F: +36 52 536-822 

EGER - PALATINUS FURDOSZOBASZALONOK 

T: +36 36-312-013 - F: +36 36-313-270 

GYÖNGYÖS -PALATINUS FURDOSZOBASZALONOK 

T: +36 37-500-162 - F: +36 37-500-163 

MISKOLC - PALATINUS FURDOSZOBASZALONOK 

T: +36 46-412-256 - F: +36 46-412-741 

KECSKEMÉT - PALATINUS FURDOSZOBASZALONOK 

T: +36 76-412-272 - F: +36 76-509-204 

BÉKÉSCSABA -PALATINUS FURDOSZOBASZALONOK 

T: +36 66-328-432 - F: +36 66-328-432 

INDIA 

NEW DELHI - MARMO HOME PVT. LTD. 

T: +91 11 2321 6112 - F: +91 11 2321 8728 

INDONESIA 

BANDUNG - WISMA SEHATI (BANDUNG) 

T: +62 22 723 8515 - F: +62 22 723 8516 

JAKARTA - WISMA SEHATI (MANGGA DUA) 

T: +62 21 6013303 - F: +62 21 6251221 

JAKARTA - WISMA SEHATI (POLIM) 

T: +62 21 7278 7711 - F: +62 21 7278 7878 

JAKARTA - WISMA SEHATI (BSD) 

T: +62 21 537 7278 - F: +62 21 537 7880 

SEMARANG - WISMA SEHATI (SEMARANG) 

T: +62 24 356 2233 - F: +62 24 356 2222 

SURABAYA - WISMA SEHATI (SURABAYA) 

T: +62 31 546 2868 - F: +62 31 546 1468 

IRÁN 

TEHRAN - FARBAR CO. LTD. 

T: +98 21 88 03 6364 - F: +98 21 88 03 8283 

IRLANDA 

CORK - ORIGINAL BATHROOM & TILES 

T: +353 0 214 310 000 - F: +353 0 214 310 003 

DUBLIN - TILESTYLE LTD 

T: +00 353 1 8555200 - F: +00 353 1 8557471 

POROSA TILE DISTRIBUTION LTD 

T: +353 (087) 0909997 - F: +353 (087) 6335551 

ISLA DE LA REUNIÓN (FRANCIA) 

SAINT DENIS - RAVATE PROFESSIONNEL SAS 

T: +262 904 024 - F: +262 904 057 

SAINT PIERRE - RAVATE PROFESSIONNEL SAS 

T: +262 961 517 - F: +262 255 465 

ISLANDIA 

REYKJAVIK - ALFABORG EHF 

T: +354 568 6755 - F: +354 568 1277 

ISRAEL 

ISRAEL REPRESENTATIVE - YECHIEL TOPOLSKI 

T: +972 5 2327 6095 - F: +972 4 811 1729 

HAIFA - TOPOLSKI & CO Ltd. 

T: +972 4 904 0496 - F: +972 4 904 0455 

BNEY BRAK - HEZI BANK 

T: +972 3 616 6641 - F: +972 4 904 6643 

MODIIN - LEVY BROS CERAMICS IMPORTERS LTD 

T: +972 3 973 9977 - F: +972 3 973 9933 

RAANANA - AMOZI NAGAR IMP. MARK. OGEN LTD. 

T: +972 9 760 1501 - F: +972 9 741 1997 

RISHON LE ZION - NEGEV CERAMICS 

T: +972 9 943 6676 - F: +972 9 6661 

JERUSALEM - BAR-AMI 1990 LTD. 

T: +972 2 531 3444 - F: +972 2 538 3740 

ITALIA 

BARI: 

ANDRIA - MIDIL-CERAMICHE S.A.S 

T: +39 08 835 66466 - F: +39 08 835 49260 

MILANO: 

CORSICO - PORCELANOSA LOMBARDIA S.P.A 

T: +39 02 458 64310 - F: +39 02 458 64415 

MODENA: 

SASSUOLO - PORCELANOSA S.P.A 

T: +39 05 368 06677 - F: +39 05 368 02184 

ROMA: 

ROMA - PORCELANOSA ROMA S.P.A 

T: +39 06 888 9977 - F: +39 06 888 7056 

JERSEY 

ST. SAVIOUR - PASTELLA GROUP 

T: 01534 870167 - F: 01534 723199 

JORDANIA 

AMMAN - AYMAN ABDALLAT & PARTNERS CO. 

T: +962 65 672 376 - F: +962 65 672 476 

KAZAJISTÁN 

ALMATY - TISACO 

T: +7 327 273 3848 - F: +7 327 258 1169 

ALMATY - NOEL 

T: +7 3272 4214 47 - F: +7 3272 5016 42 

ALMATY - SHEBER-MARKET LTD 

T: +7 3272 4353 86 - F: +7 3272 4324 64 

STROYMART - KARAGANDA 

T: (3212) 563 333 

KOSOVO 

PRISHTINA - N P KERASAN 

T: +381 38 602 667 - F: +381 38 602 667 

KUWAIT 

SAFAT - HASSAN ABUL HASSAN SADIQ 

T: +965 262 4466 - F: +965 265 1444 

LETONIA 

RIGA - TORMANIS UN PARTNERI 

T: +371 784 5361 - F: +371 784 5360 

LÍBANO 

LIBANO - GEAHCHAN GROUP 

T: +961 1480520 - F: +961 1496607 

LIBIA 

BENGHAZI - EL RAGUOBI 

T: 218 61 3370895 - F: 218 61 2237328 

TRIPOLI - EL RAGUOBI 

T: 218 91 3274885 

LITUANIA 

ALYTUS - IRIS LTD 

T: +370 315 55969 - F: +370 315 55968 

MACEDONIA 

SKOPJE - PORCA MAK 

T: +389 2 246 4164 - F: +389 2 246 3390 

MALTA 

BIRKIRKARA - ROGER SATARIANO & SONS LTD 

T: +356 21 442 769 - F: +356 21 497 017 

MALASIA 

KUALA LUMPUR - APEX CERAMICS CITY 

T: 603 4043 8333 - F: 603 4044 3339 

MARRUECOS 

CASABLANCA - CERAMEX 

T: +00212 945 3646166 - F: +00212 522 395363 

CASABLANCA - SANITAIRE 2000 

T: +212 22 363 225 - F: +212 22 394 100 

MARRAKECH - AR’CHIC 

T: +212 5 24302929 - F: +212 5 24335954 

RABAT - AR’CHIC 

T: +212 5 37792197 - F: +212 5 37792202 

TANGER - FACENOR S.A. 

T: +212 39 941 910 - F: +212 39 945 445 

MARTINICA (ANTILLAS FRANCESAS) 

LAMENTIN - JOSEPH COTTRELL S.A. 

T: +596 509 810 - F: +596 506 524 

MÉXICO 

INTERLOMAS - PORCELANOSA MÉXICO 

T: (+55) 36 05 00 84 · (+55) 36 05 00 65 · (+55) 36 05 00 67 

TLALNEPANTLA - PORCELANOSA MÉXICO 

T: (+55) 26 20 04 62 · (+55) 26 20 09 58 

MOLDAVIA 

CHISINAU - PLIMED (CASA MODERNA) 

T: +373 2 2501252/54/55/56 - F: +373 2 2716824 

MONTENEGRO 

BAR - VIP HOMES 

T: +382 304 100 - F: +382 340 900 

NEPAL 

KATMANDU - BAJRA & BAJRACHARYA ENT. 

T: +977 1 552 4851 - F: +977 1 552 4851 

NICARAGUA 

MANAGUA - DECO CENTER - GRUPO IBERICA NICARAGUA 

T: +505 270 2121 - F: +505 277 0834 

NIGERIA 

LAGOS - VICTORIA ISLANDS-PN LIFESTYLE 

T: +23 480 552 63043 - F: +23 480 222 38012 

NORUEGA 

OSLO - FAGFLIS 

T: +47 22 808 560 

NUEVA ZELANDA 

AUCKLAND - TILECO LTD 

T: +64 9 573 5736 - F: +64 9 573 5737 

PAÍSES BAJOS 

VENLO - PGN CERAMICA B.V. 

T: +32 (0)15 253366 - F: +31 (0)15 253367 

PAKISTÁN 

KARACHI - S. ABDULLA & CO. 

T: +92 21 585 0490 - F: +92 21 585 0230 

PANAMÁ 

PANAMÁ - COCINAS ITALIANAS S.A. - SPAZIO 

T: +507 214 3756 - F: +507 264 2542 

PERÚ 

LIMA - CASSINELLI 

T: +51 14 513 712 - F: +51 15 612 757 

POLONIA 

BIALYSTOK - AKCESS 

T: +48 85 6643436 - F: +48 85 6643434 

BIELSKO BIALA - ADARI 

T: +48 33 822 0449 - F: +48 33 822 0449 

BIELSKO BIALA - P.H.U. CERAMED 

T: +48 33 829 8770 - F: +48 33 829 8773 

BYDGOSZCZ - CERMAG POZNAN 

T: +48 33 829 8770 - F: +48 33 829 8773 

CZESTOCHOWA - P.H.U. FUGA 

T: +48 343682944 - F: +48 343682944 

GLIWICE - ADARI 

T: +48 32 232 2155 - F: +48 32 232 2155 

GORZÓW - STEMAR 

T: +48 95 722 3526 - F: +48 95 720 4555 

GORZÓW - WLKP 

T: +48 95 721 41 08 - F: +48 95 721 41 08 

JELENIA GÓRA - P.H. KAJA 

T: +48 75 767 2646 - F: +48 75 767 2646 

KATOWICE - ADARI 

T: +48 32 258 9574 - F: +48 32 258 9574 

KIELCE - EXCLUSIVE 

T: +48 41 345 75 49 

KOLOBRZEG - CERMAG POZNAN 

T: +48 94 355 18 88 - F: +48 94 355 18 80 

KONIN - STREFA ARCHITEKTA 

T: +48 63 243 31 14 - F: +48 63 243 30 97 

KRAKÓW - MAX FLIZ 

T: +48 01 229 07060 - F: +48 01 229 07060 

LESZNO - CREMG POSNAN 

T: +48 65 529 63 63 - F: +48 65 529 63 63 

LODZ - FUMINO 

T: +48 426373767 

LUBLIN - AQUARIUS 

T: +48 081 442 72 66 - F: +48 081 442 72 66 

OPOLE - TOMMI 

T: +48 774563126 - F: +48 774562615 

OSTRÓW - WIELKOPOLSKI - CERMAG POZNAN 

T: +48 62 735 81 12 - F: +48 62 737 28 91 

POZNAN - CERMAG POZNAN 

T: +48 616 616 161 - F: +48 618 302 378 

RADOM - CERAMIKA PRIMUS 

T: +48 48 381 0287 - F: +48 48 381 0290 

RZESZÓW - F.H. BOZ S.A. 

T: +48 17 850 0315 - F: +48 17 850 0341 

SOPOT - AGENA SP. Z O.O 

T: +48 58 550 4235 - F: +48 58 550 5459 

SZCZECIN - STEMAR 

T: +48 91 453 1782 - F: +48 91 453 1782 

SZCZECIN - STREFA ARCHITEKTA 

T: +48 91 434 00 48 - F: +48 91 434 00 48 

SLUPSK - GRESMAX 

T: +48 59 843 41 53 

WARSZAWA - WOIS SP Z.O.O 

T: +48 22 6127213 - F: +48 22 6127216 

WARSZAWA - GRESTON 

T: +48 022 720 5525 - F: +48 022 720 5524 

WARSZAWA - STREFA ARCHITEKTA 

T: +48 22 252 57 39- F: +48 22 252 57 39 

WROCLAW - CERMAG WROCLAW 

T: +48 717 820 021 - F: +48 717 820 031 

PORTUGAL 

PORTO - PORCELANOSA PORTO S.A. 

T: +351 226166600 - F: +351 226161959 

LISBOA - PORCELANOSA LISBOA 

T: +351 21 831 3020 F: +351 21 831 3029 

VISEU - PORCELANOSA VISEU 

T: +351 232430440 - F: +351 232430449 

PUERTO RICO 

SAN JUAN-THE TILE SHOP 

T:+1787 775 2030 - F:+1787 707 0137 

GUAYNABO-THE TILE SHOP 

T: +1787 720 2030 - F: +1787 287 2030 

PRINCIPADO DE ANDORRA 

ANDORRA LA VELLA - MATERIALS PIRINEU 

T: +376 822 353 

QATAR 

QATAR - UNITED SUPPLIES 

T: +974 46 85 164 - F: +974 46 85 165 

REINO UNIDO 

PORCELANOSA SHOWROOMS 

ANGLIA: 

NORWICH - PORCELANOSA ANGLIA 

T: +44 01603 789 363 - F: +44 01603 789 375 

PETERBOROUGH - PORCELANOSA ANGLIA 

T: +44 01733 325 111 - F: +44 01733 384 003 

MIDLANDS: 

NOTTINGHAM - PORCELANOSA MIDLANDS 

T: +44 0115 983 65 00 - F: +44 0115 983 65 65

SOLIHULL - PORCELANOSA MIDLANDS 

T: +44 0121 746 64 64 - F: +44 0121 746 64 65 

SOLIHULL - PORCELANOSA MIDLANDS - REGIONAL HEAD OFFICE AND 

DISTRIBUTION CENTRE 

T: +44 0121 780 00 00 - F: +44 0121 780 00 99 

NORTH EAST: 

NEWCASTLE - PORCELANOSA NORTH EAST 

T: +44 0191 272 5224 - F: +44 0191 229 57 11 

NORTH WEST: 

MANCHESTER - PORCELANOSA NORTH WEST 

T: +44 0161 817 33 00 - F: +44 0161 817 33 01 

WARRINGTON - PORCELANOSA NORTH WEST 

T: +44 01925 237 807 - F: +44 0192 523 78 88 

SCOTLAND: 

EDINBURGH - PORCELANOSA EDINBURGH 

T: +44 0131 335 38 83 - F: +44 0131 335 38 84 

GLASGOW - PORCELANOSA SCOTLAND - SHOWROOM & DESIGN CENTER 

T: +44 0141 552 8110 - F: +44 0141 552 5883 

GLASGOW - PORCELANOSA SCOTLAND - SHOWROOM & HEAD 

QUARTERS 

T: + 44 0141 533 1000 - F: +44 0141 533 1006 

SOUTH EAST: 

CROYDON - PORCELANOSA SOUTH EAST 

T: +44 0844 481 8953 - F: +44 0844 481 8963 

FULHAM - PORCELANOSA SOUTH EAST 

T: +44 0844 481 8952 - F: +44 0844 481 8962 

WATFORD - PORCELANOSA SOUTH EAST 

T: +44 0844 481 8951 - F: +44 0844 481 8961 

READING - PORCELANOSA SOUTH EAST 

T: +44 0844 481 8954 - F: +44 0844 481 8964 

SOUTHAMPTON - PORCELANOSA SOUTH EAST 

T: +44 0844 481 8956 - F: +44 0844 481 8966 

WESTERN: 

BRISTOL - PORCELANOSA WESTERN 

T: +44 0117 959 71 51 - F: +44 0117 959 71 55 

CARDIFF - PORCELANOSA WESTERN 

T: +44 0292 0465 166 - F: +44 0292 0465 156 

EXETER - PORCELANOSA SOUTH WEST 

T: +44 01392 215 552 - F: +44 01392 215 557 

YORKSHIRE: 

DONCASTER - PORCELANOSA YORKSHIRE 

T: +44 01302 30 47 13 - F: +44 01302 30 47 15 

LEEDS - PORCELANOSA YORKSHIRE 

T: +44 0113 24 44 223 - F: +44 0113 24 34 024 

SHEFFIELD - PORCELANOSA YORKSHIRE 

T: +44 0114 250 01 08 - F: +44 0114 255 22 65 

CERAMIC TILES DISTRIBUTORS: 

GLASGOW - CTD GLASGOW 

T: +44 0141 425 2666 - F: +44 0141 425 2662 

NEW CASTLE-UPON-TYNE - CTD NEWCASTLE 

T: +44 0191 276 1506 - F: +44 0191 265 0663 

MANCHESTER - CTD DENTON 

T: +44 0161 337 3050 - F: +44 0161 337 3051 

LONDON - WORLD’S END TILES 

T: +44 0207 819 2100 - F: +44 0207 819 2101 

BIRMINGHAM - CTD KINGS NORTON 

T: +44 01214 338 787 - F: +44 01214 338 788 

NORWICH - CTD NORWICH 

T: +44 01603 775 300 - F: +44 01603 789 040 

KENLEY - CTD KENLEY 

T: +44 0208 668 3236 - F: +44 0208 660 6425 

REPÚBLICA CHECA 

BRNO - DESIGN BATH SE. 

T: +420 547 216 621 

PRAGUE - DESIGN BATH SE. 

T: +420 22 984 951 

REPÚBLICA DOMINICANA 

SANTO DOMINGO - CARABELA C. POR A. 

T: + 1 809 566 0033 - F: + 1 809 541 0818 

RUMANIA 

BACAU - SSAB IMPEX 

T: +40 234 513 957 - F: +40 234 518 436 

BACAU - DELTA DESING 

T: 0372 710827 

BRASOV - DELTA DESING 

T: 0372 710812 

BUCAREST - SSAB IMPEX 

T: +40 214 113 009 - F: +40 214 120 097 

BUCAREST - DELTA DESING 

T: 021 4934129 


T: 0372 710802 


T: 021 4112546 

BUCAREST - DELTA CONCEPT STORE 

T: 0372 710808 

BUCAREST - DISENO-GLAMOUR DESIGN 

T: +40 31 22 93 210 - F: +40 31 22 93 215 

CONSTANZA - SSAB IMPEX 

T: +40 241 508 446 - F: +40 241 508 436 

CRAIOVA - SC MYDWAY IMPEX SRL 

T: +0040 722 285 029 - F: +0040 251 427 946 

IASI - DELTA CONCEPT STORE 

T: 0350 416701- F: 0350 416701 

ORADEA - MAISON DESING 

T: 0040 410 170 

PITESTI - DELTA DESING 

T: 0372 710832 

PLOIESTI - DELTA DESING 

T: 0372 710834 

ORADEA - MAISON DESING 

T: +40 743 507 811 F: +40 259 410 170 

RUSIA 

BRYANSK - ESCOBAR 

T: +7 483 266 55 56 

EKATERINBURG - DOM PLITKI TERRA 

T: +7 343 270 00 26 

IRKUTSK - PIRAMIDA 

T: +7 395 248 31 13 

KAZAN - ALAN VEST 

T: +7 843 262 34 19 

KRASNODAR - BOMOND 

T: +7 861 210 26 83 - F: +7 861 234 10 75 

KRASNOYARSK - SIBLINE 

T: +7 3912 75 20 45 

MAKHACHKALA - T.D. MODERN 

T: +7 8722 67 65 69 

MOSCU - ARTISAN 

T: +7 495 742 40 40 - F: +7 495 937 52 19 

MOSCU - KERAMIKA ELIT 

T: +7 495 724 18 18 

MOSCU - UNDERGROUND 

T: +7 495 253 53 30 / +7 495 253 69 32 

MOSCU - ZODIAK KERAMIKA 

T: +7 495 730 97 97 

NOVOSIBIRSK - ARTLUX 

T: +7 383 208 00 07 

NOVOSIBIRSK - LAVERNA 

T: +7 383 334 02 40 

PYATIGORSK - BOMOND 

T: +7 8 (8793) 975544 

ROSTOV NA DONU - BOMOND 

T: +7 863 266 50 34 - F: +7 863 268 73 39 

SAMARA - ANTAREX 

T: +7 846 267 39 34 - F: +7 846 267 39 33 

SOCHI - BOMOND 

T: +7 8622 61 23 17 

ST. PETERSBURG - LAVERNA 

T: +7 812 324 13 55 - F: +7 812 324 13 46 

ST. PETERSBURG - NOVUS 

T: +7 812 320 69 50 - +7 812 320 68 81 - F: +7 812 328 17 93 

STAVROPOL - VALENCIA 

T: +7 865 229 81 41 - F: +7 865 229 81 51 

SURGUT - DOM PLITKI TERRA 

T: +7 346 237 92 13 

TYUMEN - DOM PLITKI TERRA 

T: +7 345 241 09 61 - +7 345 241 04 74 

SENEGAL 

DAKAR - C.C.S. 

T: +221 33 849 04 04 - F: +221 33 823 13 10 

SERBIA 

BELGRADO - CERAMIC BY PORCEL. 

T: +381 11 3343026 - F: +381 11 3343297 

NOVI SAD - RACA KOMERC 

T: +381 21 451 534 - F: +381 21 472 0668 

SINGAPUR 

SINGAPUR - FERNANDO MARTIN BENITO 

T: +65 97801472 - F: +65 64621620 

SIRIA 

SIRIA - DAMASK ROSE 

T: +963 11 334 6600 - F: +963 11 334 6601 

SRI LANKA 

COLOMBO - NAVEEN CERAMIC (PVT) 

T: +94112325406 - F: +94112335637 

SUDÁFRICA 

CAPE TOWN - KENZAN TILES 

T: +27 21 5108310 - F: +27 21 5108317 

CAPE TOWN - TACTILE 

T: +27 21 70249 

DURBAN - CLASSIC TRADING 

T: +27 31 577 8382 - F: +27 31 577 7056 

T: +27 31 579 1900 - F: +27 31 579 1666 

JOHANESBURGO - CLASSIC TRADING 

T: +27 01 165 604 00 - F: +27 01 656 040 

SUDÁN 

KHARTOUM - ALMASSARRA FOR IMPORT EXPORT 

T: +249 183579399 - F: +249 183579499 

SUECIA 

BORAS - KAKELPALATZET I BORAS AB 

T: +46 (0)33 226 180 - F: +46 (0)33 226 181 

BROMMA - KAKELPALATZET I BROMA AB 

T: +46 (0)8 56 487 831 - F: +46 (0)8-988 620 

GÖTEBORG - KAKELPALATZET I BÄCKEBOL AB 

T: +46 (0)31 571 478 - F: +46 (0)31-571 477 

KATRINEHOLM - KAKELPALATZET I KATRINEHOLM AB 

T: +46 (0)8150-51 740 - F: +46 (0)150-51 775 

NYKÖPING - KAKELPALATZET I NYKÖPING AB 

T: +46 (0)155 200 999 - F: +46 (0)155-211 244 

UDDEVALLA - KAKELPALATZET I UDDEVALLA AB 

T: +46 (0)522 64 54 00 - F: +46 (0)0522-64 54 

HASSLEHOLM - STENMONTOREN I HASSLEHOLM 

T: +46 451 381 970 - F: +46 451 381 979 

MALMÖ - KERMA KAKEL AB 

T: +46 403 122 40 - F: +46 403 122 59 

MOLNDAL - KAKELPALATZET I MOLNDAL (CENTRAL) 

T: +46 (0)31 776 50 51 - F: +46 (0)31 86 39 62 

SUIZA 

BASEL - HG COMMERCIALE SPONAGEL 

T: +41 61 337 50 20 - F: +41 61 337 50 01 

BERN - HG COMMERCIALE SPONAGEL 

T: +41 31 99 622 88 - F: +41 31 99 622 01 

CRISSIER - SABAG SA 

T: +41 21 633 06 84 - F: +41 21 633 06 85 

GENEVE - SABAG SA 

T: +41 22 908 06 90 - F: +41 22 908 06 95 

LANDQUART - HG COMMERCIALE SPONAGEL 

T: +41 81 300 00 15 - F: +41 81 300 00 16 

LOSONE - BAZZI PIASTRELLE 

T: +41 91 792 16 02 - F: +41 91 792 18 02 

LUZERN - HG COMMERCIALE SPONAGEL 

T: +41 41 367 60 90 - F: +41 41 367 60 99 

PURA - SACCOMANNO TRADE AGENCY 

T: +41 796 20 85 90 - F: +41 916 00 97 71 

SCHLIEREN - HG COMMERCIALE SPONAGEL 

T: +41 1 732 44 44 - F: +41 1 732 44 00 

TAILANDIA 

BANGKOK - BOONTHAVORN CERAMIC (RATCHADAPISEK) 

T: +66 2 275 0029 - F: +66 2 275 2057 

BANGKOK - BOONTHAVORN CERAMIC CO. LTD (RANGSIT) 

T: +66 2 902 0171 - F: +66 2 902 0184 

BANGKOK - BOONTHAVORN CERAMIC CO. LTD(PINKLAO) 

T: +66 2 441 3075 - F: +66 2 441 4049 

BANGKOK - BOONTHAVORN CERAMIC CO. LTD(SUVARNABHUMI) 

T: +66 2 316 0429 - F: +66 2 316 0439 

BANGKOK - BOONTHAVORN CERAMIC CO. LTD 

(THONBUREE-PAKTHOR) 

T: +66 2 896 4471 - F: +66 2 896 4473 

BANGKOK - BOONTHAVORN CERAMIC CO. LTD (KASET NAVAMIN)) 

T: +66 2 791 2777 - F: +66 2 943 9058 

PATTAYA - BOONTHAVORN CERAMIC CO. LTD (PATTAYA) 

T: +66 38 052 222 - F: +66 38 052 221 

HUAHIN - BOONTHAVORN CERAMIC CO. LTD (HUAHIN) 

T: +66 3252-2555// +668-5488-4144 - F: +66 3252 0141 

TAIWÁN 

KAOHSIUNG - NEW CENTURY CONSTRUCTIONAL 

T: +886 7 384 8834 - F: +886 7 387 1043 

TAINAN - NEW CENTURY CONSTRUCTIONAL 

T: +886 6 261 3290 - F: +886 6 261 4373 

TAIPEI - NEW CENTURY CONSTRUCTIONAL 

T: +886 2 3393 3123 - F: +886 2 3393 3138 

TAICHUNG - NEW CENTURY CONSTRUCTIONAL 

T: +886 4 2372 8166 - F: +886 4 2376 2818 

TÚNEZ 

TÚNEZ - LIFE STYLE 

T: +216 71 861 551 - F: +216 71 861 549 

TUNIS CEDEX - ABDENNADHER BRICOLAGE CENTER 

T: +216 71 725 194 - F: +216 71 760 046 

TURQUÍA 

ISTAMBUL - YÜTAS 

T: +90 2 1227 44720 - F: +90 2 1227 20874 

UCRANIA 

KHARKIV - EUROPA 

T: +380 482 37 85 40 - F: +380 57 771 4509 

KYIV - MILLENNIUM CONCEPT 

T: +38 044 2796060 - +38 044 2796010 - F: +38 044 5676554 

KYIV - CERAMIC FASHION 

T: +38 044 281 07 27 - 

KYIV - CERAMIC FASHION 

T: +38 044 246 79 79 

KYIV - SVIT KERAMIKI 

T: +38 044 423 00 03 

LVIV - KERAM MISTO 

T: +38 32 293 98 89 

ODESSA - FIRMENIY SALON PORCELANOSA GRUPO 

T: + 38 482 37 85 40 F: +380 482 423111 

DONETSK - DI-ART 

T: +38 062 387 22 22 

DONETSK - CERAMIC FASHION 

T: +38 062 381 23 31 

DONETSK - NAUTILUS 

T: +38 062 387 58 08 

URUGUAY 

MONTEVIDEO - ACHER 

T: +598 2487 5630 - F: +598 2487 5630 

PUNTA DEL ESTE - ACHER 

T: +598 42 248 343 

T: + 598 42 250 869 

VENEZUELA 

CARACAS - PROSEIN 

T: +58 212 239 2911 - F: +58 212 239 9460 

VIETNAM 

HANOI - MILAN ARCHITECTURAL 

T: 84 4 3791 3567 - F: 84 4 3791 3568 

HOCHIMINH CITY - MILAN ARCHITECTURAL 

T: 84 8 5412 1819 - F: 84 8 5412 1820 

YEMEN 

AL-YAMAMAH GROUP ABO JALAL TAHER CORPORATION FOR GENERAL 

TRADE 

T: +967 1 470 375 - F: +967 1 405 665 

62

65 

butech building technology, S.A. 

Ctra. Vila-real - Puebla de Arenoso (CV-20), Km. 2,5 Post Box 372, 12540 Vila-real, Castellón - Spain 

Telephone (+34) 964 536 200 Fax: (+34) 964 530 034 e-mail: butech@butech.es www.butech.es

raised floors - Butech

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?