Simulation of electric and magnetic fields using FEMM - FH Aachen ...
Simulation of electric and magnetic fields using FEMM - FH Aachen ...
Simulation of electric and magnetic fields using FEMM - FH Aachen ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1.3.5 Set up the properties <strong>of</strong> materials <strong>and</strong> conductors<br />
The material is irrelevant for the voltage distribution, if it is the same in the entire lead<br />
through, so we just add „air=1‟.<br />
Figure 1-48 Property <strong>of</strong> material<br />
We set l5=la=100mm as Gnd <strong>and</strong> l1 as 115kV <strong>and</strong> then calculate the voltages on each layer<br />
one after another.<br />
Click on “Conductors” <strong>and</strong> then fill in the names <strong>and</strong> values so we can set the information <strong>of</strong><br />
Voltages.<br />
Set the total voltage to 115000V. Attach every layer with its conductor. The layers in<br />
between are set to “conductor: None”, <strong>and</strong> the two outer layers are set as following:<br />
Figure 1-49 Conductor 1<br />
Figure 1-50 Total voltage