In technical collaboration with - Harwal Group of Companies
In technical collaboration with - Harwal Group of Companies In technical collaboration with - Harwal Group of Companies
1 2 3 4 5 6 7 8 9 8 4 5 6 Accessories & Installation ALUPEX ® Sealant Intermittent Aluminium 'L' angle Aluminium Continuous 'L' angle Anchor Bolt Fastening Bolt Aluminium 'L' Bracket Concrete Window Frame Vertical fixing SLOPE Fixing to parapet 2 ALUMINIUM COMPOSITE PANELS 1 3 7 Side Wall fixing Fixing to window frame A typical fabricated panel 19 Column cladding 9
Technical Specifications PHYSICAL PROPERTIES Property Description Result Standard / Remarks 1 Average Panel Weight - ALUPEX ® FR a) 4mm thk. b) 6mm thk. 2 Average Panel Weight - ALUPEX ® and ALUPEX ® TONE a) 3mm thk. 4.80 kg/m 2 b) 4mm thk. 5.40 kg/m 2 c) 6mm thk. 7.25 kg/m 2 MECHANICAL / THERMAL PROPERTIES 1 Tensile strength - Aluminium 180 N/mm 2 20 7.50 kg/m2 ASTM D792 10.75 kg/m2 ASTM D792 ASTM D792 ASTM D792 ASTM D792 Alum. Asso. 2 Bond Strength 26.70 N/mm 2 ASTM D903 3 Shear Rigidity 2.52 KN/mm 2 ASTM C393 4 Alupex Peel/Tearing Strength - 180˚ a) 3mm thk. upto 18 kgm 7 >300˚ C ASTM D648 8 2 ASTM D903 b) 4mm thk. upto 23 kgm 2 ASTM D903 5 Bond Performance 48 hrs. of submersion in boiling water and after 21 days of immersion in water at 90˚ F. No Change Passed 6 Temperature Resistance (from -50˚ C to + 100˚ C) No Change Passed Deflection Temperature Fire Retardant Classification Class 0 & Class 1 BS 476 - Part 6 & 7 9 Sound Reduction 4mm STC = 25 def ASTM E 90 - 04 SURFACE COATING ALUMINIUM COMPOSITE PANELS 1 Dry Film Thickness (based on colour) 20 to 35µm ECCA - T1 (1995) 2 Pencil Hardness HB - H ASTM D3363 3 Adhesion No Adhesion loss or Cracking ASTM D3359 4 T bend Test No Tape off/no Cracks - 1-T ASTM D4145 5 Specular Gloss 20˚ - 30˚ (10 - 40%) ASTM D523 6 Reverse Impact No Cracking or loss of Adhesion ASTM D2794 7 Mortar Resistance No effect ASTM C267 8 Acid Pollutants No effect ASTM D1308 9 Salt Spray - 3000 hours Pass ASTM B117 10 Humidity - 3000 hours 100% @ 95˚F Unaffected ASTM D 2247 11 Acid Rain Test 15 Cycles minimum Kesternich 12 Alkali Resistance No effect Kesternich 13 Abrasion / Falling Sand Resist 65-85 Litres/mil. ASTM D 968 WEATHERING PERFORMANCE - PVDF Topcoat 1 South Florida Exposure < 5 NBS Units Change ASTM D 2244 2 UVB (313 bulbs) Passed, 3,000hrs. ASTM D822 3 Chalk Resistance Rating of 8 min. ASTM D 659
- Page 1 and 2: In technical collaboration with U.S
- Page 3 and 4: The difference is... ... to perceiv
- Page 5 and 6: Introduction The Building Materials
- Page 7 and 8: Advantages Applications • Externa
- Page 9 and 10: Quality & Test Certificates ALUMINI
- Page 11 and 12: Project Approvals Project: Skycourt
- Page 13 and 14: Completed Projects ALUMINIUM COMPOS
- Page 15 and 16: Completed Projects ALUMINIUM COMPOS
- Page 17 and 18: Completed Projects ALUMINIUM COMPOS
- Page 19: Fabrication Guidelines ALUPEX ® ca
- Page 23 and 24: NOTES ALUMINIUM COMPOSITE PANELS 22
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
8<br />
4<br />
5<br />
6<br />
Accessories & <strong>In</strong>stallation<br />
ALUPEX ®<br />
Sealant<br />
<strong>In</strong>termittent Aluminium 'L' angle<br />
Aluminium Continuous 'L' angle<br />
Anchor Bolt<br />
Fastening Bolt<br />
Aluminium 'L' Bracket<br />
Concrete<br />
Window Frame<br />
Vertical fixing<br />
SLOPE<br />
Fixing to parapet<br />
2<br />
ALUMINIUM COMPOSITE PANELS<br />
1<br />
3<br />
7<br />
Side Wall fixing Fixing to window frame<br />
A typical fabricated panel<br />
19<br />
Column cladding<br />
9