PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner - Institut für ...

PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner
220 M. Shahzad, L. Wagner:
Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical
properties of the magnesium alloy AZ80, Mater. Sci. Eng. A 506 (2009) 141.
219 M. Z. Oo, J. Müller, M. Shahzad and L. Wagner:
Annealing Effects on Mechanical Properties of the Magnesium Alloy ZK60 Processed by Various Thermo-
Mechanical Treatments, PEDAC 2009, Alexandria, Egypt.
218 E. Maawad, H.-G. Brokmeier and L. Wagner:
Investigation of Near-Surface Residual Stress Gradients in Shot Peened Ti-2.5Cu Measured by Mechanical and
Diffraction Methods, PEDAC 2009, Alexandria, Egypt.
217 L. Wagner and M. Wollmann:
Titankonstruktionen profitieren von der hohen Variierbarkeit des Gefüges, MM Das IndustrieMagazin 23 (2009)
44.
216 M. H. Mhaede, K. M. Ibrahim, M. Wollmann and L. Wagner:
Enhancing Fatigue Performance of Ductile Iron by Austempering and Mechanical Surface Treatments,
ARABCAST 2008, Sharm El-Shiekh, Egypt.
215 M. H. Mhaede, M. Wollmann and L. Wagner:
Correlation between Mechanical Surface Treatments and Corrosion Behaviour of Aluminium Alloys,
EUROCORR 2008 , Edinburgh, UK.
214 L. Wagner, T. Ludian and M. Wollmann:
Ball-Burnishing and Roller-Burnishing to Improve Fatigue Performance of Structural Alloys, Engineering
Against Fracture, 2009, 1, 1-11.
213 E. Barel, G. Ben Hamu, D. Eliezer and L. Wagner:
The Effect of Heat Treatment and HCF Performance on Hydrogen Trapping Mechanism in Timetal LCB Alloy,
Journal of Alloys and Compounds A, 468, 77-86, (2009).
212 G. Ben Hamu, D. Eliezer and L. Wagner:
The Relation between Severe Plastic Deformation microstructure and Corrosion Behavior of AZ31 Magnesium
Alloy, Journal of Alloys and Compounds A, 468, 222-229, (2009).
211 J. Müller. S. Yi, M. Janecek, J. Cizek and L. Wagner:
Effect of Equal Channel Angular Pressing on Microstructure, Texture and High-Cycle Fatigue Performance of
Wrought Magnesium Alloys, International Journal of Materials Research, 2009/06, 838.
210 M. Shahzad, M. Janecek, L. Wagner:
Effects of prior homogenization treatments on microstructure development and mechanical properties of the
extruded wrought magnesium alloy ZK60, International Journal of Materials Research, 2009/03, 370.
209 F. Novy, M. Janecek, V. Skorik, J. Müller and L. Wagner:
Very High Cycle Fatigue Behaviour of As-Extruded AZ31, AZ80 and ZK60 Magnesium Alloys
International Journal of Materials Research, 2009/03, 288.
208 M. Zaw Oo, J. Müller, M. Janecek, L. Wagner:
Annealing effects after various thermo-mechanical treatments on microstructure and mechanical properties of
the wrought magnesium alloy AZ80, International Journal of Materials Research 2009/03, 374.
207 A. Flejszar, T. Ludian, A. Mielczarek, W. Riehemann, L. Wagner:
Effects of shot peening on internal friction in CP aluminum and aluminum alloy 6008, International Journal of
Materials Research 2009/06, 892.
2008
206 T. Ludian, J. Atoura and L. Wagner
Notch Effects on HCF Performance of Mechanically Surface Treated Titanium Alloys, Materials Science and
Engineering , Erlangen, (2008)
205 A. Frischkorn, J. Atoura, M. Wollmann and L. Wagner:
Refinement of Equiaxed and Lamellar Microstructures by Short-Time Recrystallization of the Alpha-Titanium
Alloy Ti-2.5Cu, Materials Science and Engineering , Erlangen, (2008)
204 B. Hadzima, M. Janecek, P. Suchy, J. Müller and L. Wagner:
Microstructure and Corrosion Properties of Fine-Grained Mg-Based Alloys, Mat. Sci. Forum, 584-586 (2008),
994.
203 D. Arpacy, S. Yi, M. Janecek, A. Bakkaloglu and L. Wagner:
Microstrucure Evolution during HPT of AZ80, Mat. Sci. Forum, 584-586 (2008), 300.
202 J. Müller, M. Janecek and L. Wagner:
Influence of Post-ECAP TMT on HCF Performance of Wrought Magnesium Alloys, Mat. Sci. Forum, 584-586
(2008), 858.