PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner - Institut für ...

More documents

Recommendations

Info

PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner 256 J. Stráský, M. Janecek, P. Harcuba, M. Bukovina, L. Wagner: The effect of microstructure on fatigue performance of Ti-6Al-4V alloy after EDM surface treatment for application in orthopaedics, JMBBM, 2011, 8, 1955-1962. 255 J. Strásky, M. Janecek, L. Bačáková, J. Vrátná, P. Harcuba, L. Wagner: Fatigue properties and biocompatibility of Ti-6Al-4V alloy after EDM process for improved osteointegration – comprehensive research report. Ti-2011, Titanium, Science and Technology (Zhou Lian, ed.) (in print) 254 E. Maawad, H.-G. Brokmeier, L. Wagner, Y. Sano, Ch. Genzel: Investigation on the surface and near-surface characteristics of Ti-2.5Cu after various mechanical surface treatments, Int. Journal of Surface and Coatings Technology, 205 (2011) 3644–3650. 253 K. Zay, E. Maawad, H.-G. Brokmeier, L. Wagner, Ch. Genzel: Influence of mechanical surface treatments on the high cycle fatigue performance of TIMETAL 54M, Int. Journal of Materials Science and Engineering A, A 528(2011) 2554–2558. 252 M. Mhaede, Y. Sano, I Altenberger, L. Wagner Fatigue Performance of Al 7075-T73 and Ti-6Al-V: Comparing Results after Shot Peening, Laser Shock Peening and Ball-Burnishing, International Journal of Structural Integrity, volume 2, 2, 2011, 185-199. 251 K. Ibrahim, M. Mhaede and L. Wagner: Mechanical Properties of CP-Ti Produced by Investment Casting, Trans. Nonferrous Met. Soc. China 21(2011) 1735−1740 250 Y. Fouad, M. Mhaede, L. Wagner Effects of Mechanical Surface Treatments on Fatigue Performance of Extruded ZK60 Alloy, Fatigue and Fracture of Engineering Materials and Structures, Volume 34, Issue 6, pages 403–407, June 2011. 249 I. Stoll, D. Helm, H. Polanetzki, L. Wagner Ultrasonic Shot Peening (USP) on Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo Aero Engine Components, Shot Peening (J. Champaigne, ed.), 371. 248 H. Polanetzki, J. Ehrl, I. Stoll, L. Wagner Influence of Surface Enhancement Processes on Mechanical Properties of the Titanium Alloy Ti6246, Shot Peening (J. Champaigne, ed.), 309. 247 J. Ehrl, H. Polanetzki, R. Hessert, L. Wagner Influence of Mechanical Surface Strengthening on Nickel-base Super alloy DA718, Shot Peening (J. Champaigne, ed.), 213. 246 H. Sin, M. Janecek, L. Wagner: Effects of Near-Surface Severe Plastic Deformations on Microstructure and Fatigue Properties of Cp-Cu, Shot Peening (J. Champaigne, ed.), 311. 245 M. Wollmann, J. Atoura, M. Mhaede, L. Wagner: Comparing Fatigue Notch Sensitivities of Various Alloys Before and After Mechanical Surface Treating, Shot Peening (J. Champaigne, ed.), 423. 244 M. Mhaede, Y. Sano, I. Altenberger, L. Wagner: Fatigue Performance of Al7075-T73 and Ti-6Al-4V: Comparing Results after Shot Peening, Laser Shock Peening and Ball-Burnishing, Shot Peening (J. Champaigne, ed.), 297. 243 K. Zay, Y. Shan, Y. Kosaka, L. Wagner: Shot Peening and Ball-Burnishing to Improve HCF Strength of the New Titanium Alloy TIMETAL-54M, Shot Peening (J. Champaigne, ed.), 303. 242 M. Mhaede, L. Wagner: Effect of Coverage in Ball-Burnishing on Fatigue Performance of Al2024-T4, Shot Peening (J. Champaigne, ed.), 291 241 M. Wollmann, M. Mhaede, L. Wagner: Effect of Austenite Stability on Phase Transformation and Fatigue Performance of Stainless Steels after Various Mechanical Surface Treatments, Shot Peening (J. Champaigne, ed.), 285. 240 E. Maawad, H.-G. Brokmeier, L. Wagner, C. Genzel, M. Klaus: Residual Stress-Depth Profiles in Mechanically Surface Treated Titanium Alloys: Comparing Results Obtained by X-Ray Diffraction, Synchrotron Radiation and Incremental Hole Drilling Methods, Shot Peening (J. Champaigne, ed.), 147. 239 K. Zay, M. Mhaede, M. Wollmann, L. Wagner: Considering Environmental Effects in Understanding HCF Performance of Mechanically Surface Treated Fe- Based Alloys, Shot Peening (J. Champaigne, ed.), 255. 238 L. Wagner: Recent Titanium Research and Developments in Germany, Ti-2011, Titanium Science and Technology (L. Zhou, H. Chang, Y. Lu, D. Xu, eds.) Science Press Beijing (2012) 38. 237 M. Wollmann, J. Kiese, L. Wagner: Properties and Applications of Titanium Alloys in Transport, Ti-2011, Titanium Science and Technology (L.
PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner Zhou, H. Chang, Y. Lu, D. Xu, eds.) Science Press Beijing (2012) 837. 236 K. Zay, Y. Kosaka, M. Wollmann, L. Wagner: Effects of Thermo-Mechanical Treatments on Microstructures and Mechanical Properties: TIMETAL-54M vs. Ti- 6Al-4V, Ti-2011, Titanium Science and Technology (L. Zhou, H. Chang, Y. Lu, D. Xu, eds.) Science Press Beijing (2012) 984. 235 J. Atoura, J. Smilauerova, L. Wagner: Effects of Severe Plastic Deformotion on Grain Refinements and fatigue Performance of the Metastable Beta Titanium Alloys TIMETAL LCB, Ti-2011, Titanium Science and Technology (L. Zhou, H. Chang, Y. Lu, D. Xu, eds.) Science Press Beijing (2012)901. 234 J. Atoura, M. Wollmann, M. Mhaede, L. Wagner: Influence of Mechanical Surface Treatments on Notched Fatigue of Various Titanium Alloys, Ti-2011, Titanium Science and Technology (L. Zhou, H. Chang, Y. Lu, D. Xu, eds.) Science Press Beijing (2012) 972. 233 M. Mhaede, I. Altenberger, Y. Sano, L. Wagner: Surface layer Properties and Fatigue Behavior in Ti-6Al-4V: Comparing Results after Laser Shock Peening, Shot Peening and Ball-Burnishing, Ti-2011, Titanium Science and Technology (L. Zhou, H. Chang, Y. Lu, D. Xu, eds.) Science Press Beijing (2012) 1338. 232 K. Ibrahim, M. Mhaede, L. Wagner: Mechanical Properties of Titanium Alloys Produced in Egypt, Ti-2011, Titanium Science and Technology (L. Zhou, H. Chang, Y. Lu, D. Xu, eds.) Science Press Beijing (2012) 518. 231 Z. Wu, Y. Shan, Y. Kosaka, L. Wagner: Mechanical Properties of Ti-54M vs. Ti-6Al-4V, Ti-2011, Beijing, China, Titanium, Science and Technology (Zhou Lian, ed.), in print. 2010 230 E. Maawad, H.-G. Brokmeier, M. Hofmann, Ch. Genzel and L. Wagner: Stress Distributions in Mechanically Surface Treated Ti-2.5Cu by Combining Energy-Dispersive Synchrotron and Neutron Diffractions, Materials Science and Engineering, A 527, 2010, 5745. 229 E. Maawad, H.-G. Brokmeier and L. Wagner: Texture Gradients in Shot Peened Ti-2.5Cu, Solid State Phenomena, 160, 2010, 141. 228 M. Shahzad, L. Wagner: Thermo-Mechanical Methods for Improving Fatigue Performance of Wrought Magnesium Alloys, Fatigue Fract Engng Mater Struct 33, 2010, 221–226. 2009 227 J. Mueller, M. Wollmann, L. Wagner: Improving HCF Performance of Wrought Magnesium Alloys through Combining Various Methods of Severe Plastic Deformation, PFAM VXIII, Sendai, Japan 226 L. Wagner, K. Zay, M. Wollmann, Y. Kosaka: Thermo-Mechanical Processing and Mechanical Surface Treatments on Property Improvements in the New (α+β) Titanium Alloy TIMETAL-54M, PFAM VXIII, Sendai, Japan 225 T. Ryspaev, M. Janecek, R. Kral, V. Wesling, L. Wagner: Ultrafine Grain Development in Magnesium Alloys by Extruding, ECAP and Swaging, Magnesium Alloys and their Applications, DGM (2009) 224 L. Wagner, M. Mhaede, K. Zay: Enhancing Fatigue Performance of the New Titanium Alloy TIMETAL-54M by Thermo-Mechanical Treatments and Mechanical Surface Treatments, Metal Finishing News, Vol.10, November Issue (2009) 58. 223 M. Shahzad, L. Wagner: The role of Zr-rich cores in strength differential effect in an extruded Mg-Zn-Zr alloy, J. Alloy Compd. Vol. 468, no. 1-2, (2009), 103-108 222 F. Novy, M. Janecek, V. Skorik, J. Müller and L. Wagner: Very high cycle fatigue behaviour of as-extruded AZ31, AZ80, and ZK 60 magnesium Alloys, Int. J. Mat. Res. 100 (2009) 288. 221 M. Shahzad, L. Wagner: Microstructure development during extrusion in a Mg—Zn—Zr alloy, Script. Mater. 60 (2009) 536.
Page 1: PUBLIKATIONEN Prof. Dr.-Ing. habil.
Page 5 and 6: PUBLIKATIONEN Prof. Dr.-Ing. habil.

PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner - Institut für ...

Create successful ePaper yourself

Delete template?

Save as template?