PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner - Institut für ...
PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner - Institut für ... PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner - Institut für ...
PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner 112 M. Hilpert and L. Wagner: Environmental Effects on the HCF Behavior of the Magnesium Alloys AZ 31 and AZ 80 Magnesium Technology 2000, (H. I. Kaplan, J. N. Hryn and B. B. Clow, eds.) TMS (2000) 375. 111 M. Hilpert and L. Wagner: Corrosion Fatigue Behavior of the High-Strength Magnesium Alloy AZ 80 Journal of Materials Engineering and Performance, Vol. 9, No. 4 (2000) 402. 1999 110 G. Quan, S. Yang, Y. Lin, J. He, D. Yang and L. Wagner: In-situ Observation of Fatigue Fracture of MMC ICCM (1999) 1. 109 T. Dörr, M. Hilpert, P. Beckmerhagen, A. Kiefer and L. Wagner: Influence of Shot Peening on Fatigue Performance of High-Strength Aluminum and Magnesium Alloys Shot Peening, (A. Nakonieczny, ed.) IMP (1999) 153. 108 A. Drechsler, J. Kiese and L. Wagner: A Comparison of the Effects of Shot Peening and Roller-Burnishing on the Fatigue Performance of Titanium Alloys, Shot Peening, (A. Nakonieczny, ed.) IMP (1999) 145. 107 T. Dörr and L. Wagner: Fatigue Response of Various Titanium Alloys to Shot Peening Surface Treatment IV, (C. A. Brebbia, J. M Kenny, eds.) WIT PRESS (1999) 349. 106 M. Hilpert and L. Wagner: Fatigue Performance of a Shot Peened High-Strength Magnesium Alloy, Surface Treatment IV, (C. A. Brebbia, J. M Kenny, eds.) WIT PRESS (1999) 331. 105 M. Hilpert and L. Wagner: Mechanical Surface Treatments on High-Strength Magnesium Alloys for Fatigue Life Improvements Automotive Alloys III, TMS Annual Meeting, San Diego, Ca, USA (1999). 104 A. Berg and L. Wagner: Near-Surface Gradient Microstructures in Metastable Beta-Titanium Alloys for Improved Fatigue Performance, Materials Science Forum Vols., ed. by W. A. Kaysser (1999) 103 J. Kiese, U. Holzwarth and L. Wagner: Effects of Surface Finishing on Fatigue Performance of the Surgical Implant Alloy Ti-6Al-7Nb Fatigue Behavior of Titanium Alloys, (R. R. Boyer, D. Eylon and G. Lütjering, eds.) TMS (1999) 323. 102 A. Berg, A. Drechsler and L. Wagner: Roller-burnishing to Improve Fatigue Life in Beta Titanium Alloys Fatigue Behavior of Titanium Alloys, (R. R. Boyer, D. Eylon and G. Lütjering, eds.) TMS (1999) 267. 101 L. Wagner: Effect of Mechanical Surface Treatments on Fatigue Performance of Titanium Alloys (Invited) Fatigue Behavior of Titanium Alloys, (R. R. Boyer, D. Eylon and G. Lütjering, eds.) TMS (1999) 253. 100 J. Lindemann and L. Wagner: Mean Stress Effects on Fatigue Strength in Titanium Alloys Fatigue Behavior of Titanium Alloys, (R. R. Boyer, D. Eylon and G. Lütjering, eds.) TMS (1999) 47. 99 L. Wagner: Mechanical Surface Treatments on Titanium, Aluminum and Magnesium Alloys Materials Science and Engineering A 263 (1999) 210. 98 J. Lindemann and L. Wagner: Microtextural Effects on Mechanical Properties of Duplex Microstructures in (Alpha + Beta) Titanium Alloys, Materials Science and Engineering A 263 (1999) 137. 97 J. Lindemann and L. Wagner: Mean Stress Sensitivity of the Near-Alpha Titanium Alloy TIMETAL 1100: Effects of Test Temperature Microstructure and Mechanical Properties of Metallic High-Temperature Materials, ed. by H. Mughrabi, G. Gottstein, H. Mecking, H. Riedel and J. Tobolski, Wiley-VCH (1999) 144. 96 C. Müller, S. Tertsch, H. E. Exner and L. Wagner: Influence of Silicide Precipitates on Microstructure and Fatigue of TIMETAL 1100 Microstructure and Mechanical Properties of Metallic High-Temperature Materials, ed. by H. Mughrabi, G. Gottstein, H. Mecking, H. Riedel and J. Tobolski, Wiley-VCH (1999) 122. 1998
PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner 95 Drechsler A., Dörr T. Wagner L.: Mechanical surface treatments on Ti-10V-2Fe-3Al for improved fatigue resistance, Materials Science and Engineering, A243, 1998, 217-220. 94 J. Lindemann and L. Wagner: Microtextural Effects on Mechanical Properties of Duplex Microstructures in (Alpha + Beta) Titanium Alloys Titanium ’98 (L. Zhou, D. Eylon, G. Lütjering, and C. Ouchi, eds.) International Academic Publishers (1998) 570. 93 L. Wagner: Mechanical Surface Treatments on Titanium, Aluminum and Magnesium Alloys Titanium ’98 (L. Zhou, D. Eylon, G. Lütjering, and C. Ouchi, eds.) International Academic Publishers (1998) 271. 92 L. Wagner: Neuartige Magnesiumbleche für die Leichtbauindustrie, Bänder Bleche Rohre (1998) 28. 91 M. Hilpert and L. Wagner: Effect of Mechanical Surface Treatments on Fatigue Behavior of the High-Strength Magnesium Alloy AZ 80 Magnesium Alloys and their Applications, (B. L. Mordike, K. U. Kainer, eds.) MATINFO (1998) 271. 90 M. Hilpert, A. Styczynski, J. Kiese and L. Wagner: Influence of Thermomechanical Processing on Microstructure, Texture and Fatigue Performance of the High- Strength Magnesium Alloy AZ 80 Magnesium Alloys and their Applications (B. L. Mordike, K. U. Kainer, eds.) MATINFO (1998) 319. 89 A.Berg, J. Kiese and L. Wagner: Microstructural Gradients in Ti-3Al-8V-6Cr-4Zr-4Mo for Excellent HCF-Strength and Toughness, Materials Science and Engineering A 243 (1998) 146. 88 A. Lange, J. Lindemann, A. Styczynski und L. Wagner: Licht- und rasterelektronenmikroskopische Untersuchung der Kriechschädigung in der warmfesten Titanlegierung TIMETAL 1100 , Praktische Metallografie, 35 (1998) 9, 469. 1997 87 L. Wagner und T. Dörr: Mechanische Oberflächenbehandlungen von Titanlegierungen: Grundsätzliche Mechanismen Forum der Forschung (Hrsg.: E. Sigmund), Wissenschaftsmagazin der BTU Cottbus, Heft 5.2 (1997) 138. 86 J. Lindemann and L. Wagner: Mean Stress Sensitivity in Fatigue in Alpha, (Alpha + Beta) and Beta Titanium Alloys Materials Science and Engineering A (1997) 1118. 85 A. Drechsler, T. Dörr, J. Kiese and L. Wagner: Mechanical and Thermomechanical Surface Treatments to Enhance HCF-Strength in High-Strength Beta Titanium Alloys, Light-Weight Alloys for Aerospace Applications IV (E. W. Lee, W. E. Frazier, K. Jata and N. J. Kim, eds.) TMS (1997) 151. 84 A. Berg, J. Kiese and L. Wagner: Crack Propagation in Gradient Microstructures in Titanium Alloys, Light-Weight Alloys for Aerospace Applications IV, (E. W. Lee, W. E. Frazier, K. Jata and N. J. Kim, eds.) TMS (1997) 207. 83 J. Lindemann, A. Styczynski and L. Wagner: Elevated Temperature Mechanical Properties of the Near-Alpha Titanium Alloy TIMETAL 1100 High Temperature Titanium Alloys I, (E. W. Lee, W. E. Frazier, K. Jata and N. J. Kim, eds.) TMS (1997). 1996 82 L. Wagner: Mechanical Surface Treatments on Titanium Alloys: Fundamental Mechanisms Surface Performance of Titanium (J. K. Gregory, H. J. Rack and D. Eylon, eds.) TMS-AIME (1996) 199. 81 L. Wagner und J. K. Gregory: Neue Entwicklungen auf dem Gebiet der Beta-Titanlegierungen, Forum der Forschung (hrsg.: E. Sigmund), Wissenschaftsmagazin der BTU Cottbus, Heft 5.1 (1996) 67. 80 J. K. Gregory und L. Wagner: Thermomechanische und thermochemische Randschichtbehandlungen an hochfesten Titanlegierungen Jahrbuch der Oberflächentechnik (A. Zielonka, Hrsg.) Hüthig Verlag (1997) 309. 79 W. Walz, T. Dörr, J. Kiese and L. Wagner: Schwingfestigkeit höchstfester Leichtbauwerkstoffe auf Titanbasis nach Festwalzen und Ausscheidungshärtung im Kerbgrund, Leichtbau durch innovative Fertigungsverfahren (H. Zenner, ed.) DVM (1996) 51.
- Page 1 and 2: PUBLIKATIONEN Prof. Dr.-Ing. habil.
- Page 3 and 4: PUBLIKATIONEN Prof. Dr.-Ing. habil.
- Page 5 and 6: PUBLIKATIONEN Prof. Dr.-Ing. habil.
- Page 7 and 8: PUBLIKATIONEN Prof. Dr.-Ing. habil.
- Page 9: PUBLIKATIONEN Prof. Dr.-Ing. habil.
- Page 13 and 14: PUBLIKATIONEN Prof. Dr.-Ing. habil.
- Page 15 and 16: PUBLIKATIONEN Prof. Dr.-Ing. habil.
<strong>PUBLIKATIONEN</strong> <strong>Prof</strong>. <strong>Dr</strong>.-<strong>Ing</strong>. <strong>habil</strong>. L. <strong>Wagner</strong><br />
95 <strong>Dr</strong>echsler A., Dörr T. <strong>Wagner</strong> L.:<br />
Mechanical surface treatments on Ti-10V-2Fe-3Al for improved fatigue resistance, Materials Science and<br />
Engineering, A243, 1998, 217-220.<br />
94 J. Lindemann and L. <strong>Wagner</strong>:<br />
Microtextural Effects on Mechanical Properties of Duplex Microstructures in (Alpha + Beta) Titanium Alloys<br />
Titanium ’98 (L. Zhou, D. Eylon, G. Lütjering, and C. Ouchi, eds.) International Academic Publishers (1998)<br />
570.<br />
93 L. <strong>Wagner</strong>:<br />
Mechanical Surface Treatments on Titanium, Aluminum and Magnesium Alloys Titanium ’98 (L. Zhou, D. Eylon,<br />
G. Lütjering, and C. Ouchi, eds.) International Academic Publishers (1998) 271.<br />
92 L. <strong>Wagner</strong>:<br />
Neuartige Magnesiumbleche <strong>für</strong> die Leichtbauindustrie, Bänder Bleche Rohre (1998) 28.<br />
91 M. Hilpert and L. <strong>Wagner</strong>:<br />
Effect of Mechanical Surface Treatments on Fatigue Behavior of the High-Strength Magnesium Alloy AZ 80<br />
Magnesium Alloys and their Applications, (B. L. Mordike, K. U. Kainer, eds.) MATINFO (1998) 271.<br />
90 M. Hilpert, A. Styczynski, J. Kiese and L. <strong>Wagner</strong>:<br />
Influence of Thermomechanical Processing on Microstructure, Texture and Fatigue Performance of the High-<br />
Strength Magnesium Alloy AZ 80 Magnesium Alloys and their Applications (B. L. Mordike, K. U. Kainer, eds.)<br />
MATINFO (1998) 319.<br />
89 A.Berg, J. Kiese and L. <strong>Wagner</strong>:<br />
Microstructural Gradients in Ti-3Al-8V-6Cr-4Zr-4Mo for Excellent HCF-Strength and Toughness, Materials<br />
Science and Engineering A 243 (1998) 146.<br />
88 A. Lange, J. Lindemann, A. Styczynski und L. <strong>Wagner</strong>:<br />
Licht- und rasterelektronenmikroskopische Untersuchung der Kriechschädigung in der warmfesten<br />
Titanlegierung TIMETAL 1100 , Praktische Metallografie, 35 (1998) 9, 469.<br />
1997<br />
87 L. <strong>Wagner</strong> und T. Dörr:<br />
Mechanische Oberflächenbehandlungen von Titanlegierungen: Grundsätzliche Mechanismen Forum der<br />
Forschung (Hrsg.: E. Sigmund), Wissenschaftsmagazin der BTU Cottbus, Heft 5.2 (1997) 138.<br />
86 J. Lindemann and L. <strong>Wagner</strong>:<br />
Mean Stress Sensitivity in Fatigue in Alpha, (Alpha + Beta) and Beta Titanium Alloys Materials Science and<br />
Engineering A (1997) 1118.<br />
85 A. <strong>Dr</strong>echsler, T. Dörr, J. Kiese and L. <strong>Wagner</strong>:<br />
Mechanical and Thermomechanical Surface Treatments to Enhance HCF-Strength in High-Strength Beta<br />
Titanium Alloys, Light-Weight Alloys for Aerospace Applications IV (E. W. Lee, W. E. Frazier, K. Jata and N. J.<br />
Kim, eds.) TMS (1997) 151.<br />
84 A. Berg, J. Kiese and L. <strong>Wagner</strong>:<br />
Crack Propagation in Gradient Microstructures in Titanium Alloys, Light-Weight Alloys for Aerospace<br />
Applications IV, (E. W. Lee, W. E. Frazier, K. Jata and N. J. Kim, eds.) TMS (1997) 207.<br />
83 J. Lindemann, A. Styczynski and L. <strong>Wagner</strong>:<br />
Elevated Temperature Mechanical Properties of the Near-Alpha Titanium Alloy TIMETAL 1100 High<br />
Temperature Titanium Alloys I, (E. W. Lee, W. E. Frazier, K. Jata and N. J. Kim, eds.) TMS (1997).<br />
1996<br />
82 L. <strong>Wagner</strong>:<br />
Mechanical Surface Treatments on Titanium Alloys: Fundamental Mechanisms Surface Performance of Titanium<br />
(J. K. Gregory, H. J. Rack and D. Eylon, eds.) TMS-AIME (1996) 199.<br />
81 L. <strong>Wagner</strong> und J. K. Gregory:<br />
Neue Entwicklungen auf dem Gebiet der Beta-Titanlegierungen, Forum der Forschung (hrsg.: E. Sigmund),<br />
Wissenschaftsmagazin der BTU Cottbus, Heft 5.1 (1996) 67.<br />
80 J. K. Gregory und L. <strong>Wagner</strong>:<br />
Thermomechanische und thermochemische Randschichtbehandlungen an hochfesten Titanlegierungen<br />
Jahrbuch der Oberflächentechnik (A. Zielonka, Hrsg.) Hüthig Verlag (1997) 309.<br />
79 W. Walz, T. Dörr, J. Kiese and L. <strong>Wagner</strong>:<br />
Schwingfestigkeit höchstfester Leichtbauwerkstoffe auf Titanbasis nach Festwalzen und Ausscheidungshärtung<br />
im Kerbgrund, Leichtbau durch innovative Fertigungsverfahren (H. Zenner, ed.) DVM (1996) 51.
Change language