PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner - Institut für ...

PUBLIKATIONEN Prof. Dr.-Ing. habil. L. Wagner
112 M. Hilpert and L. Wagner:
Environmental Effects on the HCF Behavior of the Magnesium Alloys AZ 31 and AZ 80 Magnesium
Technology 2000, (H. I. Kaplan, J. N. Hryn and B. B. Clow, eds.) TMS (2000) 375.
111 M. Hilpert and L. Wagner:
Corrosion Fatigue Behavior of the High-Strength Magnesium Alloy AZ 80
Journal of Materials Engineering and Performance, Vol. 9, No. 4 (2000) 402.
1999
110 G. Quan, S. Yang, Y. Lin, J. He, D. Yang and L. Wagner:
In-situ Observation of Fatigue Fracture of MMC ICCM (1999) 1.
109 T. Dörr, M. Hilpert, P. Beckmerhagen, A. Kiefer and L. Wagner:
Influence of Shot Peening on Fatigue Performance of High-Strength Aluminum and Magnesium Alloys Shot
Peening, (A. Nakonieczny, ed.) IMP (1999) 153.
108 A. Drechsler, J. Kiese and L. Wagner:
A Comparison of the Effects of Shot Peening and Roller-Burnishing on the Fatigue Performance of Titanium
Alloys, Shot Peening, (A. Nakonieczny, ed.) IMP (1999) 145.
107 T. Dörr and L. Wagner:
Fatigue Response of Various Titanium Alloys to Shot Peening
Surface Treatment IV, (C. A. Brebbia, J. M Kenny, eds.) WIT PRESS (1999) 349.
106 M. Hilpert and L. Wagner:
Fatigue Performance of a Shot Peened High-Strength Magnesium Alloy, Surface Treatment IV, (C. A. Brebbia, J.
M Kenny, eds.) WIT PRESS (1999) 331.
105 M. Hilpert and L. Wagner:
Mechanical Surface Treatments on High-Strength Magnesium Alloys for Fatigue Life Improvements
Automotive Alloys III, TMS Annual Meeting, San Diego, Ca, USA (1999).
104 A. Berg and L. Wagner:
Near-Surface Gradient Microstructures in Metastable Beta-Titanium Alloys for Improved Fatigue Performance,
Materials Science Forum Vols., ed. by W. A. Kaysser (1999)
103 J. Kiese, U. Holzwarth and L. Wagner:
Effects of Surface Finishing on Fatigue Performance of the Surgical Implant Alloy Ti-6Al-7Nb Fatigue Behavior
of Titanium Alloys, (R. R. Boyer, D. Eylon and G. Lütjering, eds.) TMS (1999) 323.
102 A. Berg, A. Drechsler and L. Wagner:
Roller-burnishing to Improve Fatigue Life in Beta Titanium Alloys Fatigue Behavior of Titanium Alloys, (R. R.
Boyer, D. Eylon and G. Lütjering, eds.) TMS (1999) 267.
101 L. Wagner:
Effect of Mechanical Surface Treatments on Fatigue Performance of Titanium Alloys (Invited) Fatigue Behavior
of Titanium Alloys, (R. R. Boyer, D. Eylon and G. Lütjering, eds.) TMS (1999) 253.
100 J. Lindemann and L. Wagner:
Mean Stress Effects on Fatigue Strength in Titanium Alloys Fatigue Behavior of Titanium Alloys, (R. R. Boyer,
D. Eylon and G. Lütjering, eds.) TMS (1999) 47.
99 L. Wagner:
Mechanical Surface Treatments on Titanium, Aluminum and Magnesium Alloys Materials Science and
Engineering A 263 (1999) 210.
98 J. Lindemann and L. Wagner:
Microtextural Effects on Mechanical Properties of Duplex Microstructures in (Alpha + Beta) Titanium Alloys,
Materials Science and Engineering A 263 (1999) 137.
97 J. Lindemann and L. Wagner:
Mean Stress Sensitivity of the Near-Alpha Titanium Alloy TIMETAL 1100: Effects of Test Temperature
Microstructure and Mechanical Properties of Metallic High-Temperature Materials, ed. by H. Mughrabi, G.
Gottstein, H. Mecking, H. Riedel and J. Tobolski, Wiley-VCH (1999) 144.
96 C. Müller, S. Tertsch, H. E. Exner and L. Wagner:
Influence of Silicide Precipitates on Microstructure and Fatigue of TIMETAL 1100 Microstructure and
Mechanical Properties of Metallic High-Temperature Materials, ed. by H. Mughrabi, G. Gottstein, H. Mecking,
H. Riedel and J. Tobolski, Wiley-VCH (1999) 122.
1998