Rxf - Johnson Controls Inc.

More documents

Recommendations

Info

Form 070.410-IOM 2011-07 Supersedes: 070-410 IOM 2011-01 Subject to change without notice Published in USA • 0711 • PDF © 2011 Johnson Controls Inc. - ALL RIGHTS RESERVED JOhNSON CONTROLS 100 CV Avenue Waynesboro, PA 17268-1206 USA Phone: 717-762-2121 • FAX: 717-762-8624 www.johnsoncontrols.com/frick
Page 1 and 2:
Form 070.410-IOM (JUL 2011) RXF ROT
Page 3 and 4:
PREFACE This manual has been prepar
Page 5 and 6:
Installation FOUNDATION NOTE: Allow
Page 7 and 8:
NOTE: Care must be taken when enter
Page 9 and 10:
4. Welding should occur in two segm
Page 11 and 12:
Other than the isolation valve need
Page 13 and 14: Operation OPERATION and START-UP IN
Page 15 and 16: COMPRESSOR UNLOADING: The compresso
Page 17 and 18: • Use the [ 0 ] key to change the
Page 19 and 20: • Alarms - If an alarm has been d
Page 21 and 22: THERMOSYPHON OIL COOLING Thermosyph
Page 23 and 24: etween the separator shell and comp
Page 25 and 26: When changing the coalescer filter
Page 27 and 28: DEMAND PUMP ASSEMBLY Assembly Notes
Page 29 and 30: Pressure gauge - Discharge Port 1.
Page 31 and 32: Figure 33 MOTOR BEARINGS Lubricate
Page 33 and 34: an allowance in the readings must b
Page 35 and 36: RXF ROTARY SCREW COMPRESSOR UNITS M
Page 41 and 42: LIQUID REFRIGERANT FROM RECEIVER CO
Page 43 and 44: CONNECTIONS 1 MAIN OIL SUPPLY 2 SLI
Page 49 and 50: GROUNDING Grounding is the most imp
Page 51 and 52: Drilling can cause metal filings to
Page 53 and 54: FORMS RXF ROTARY SCREW COMPRESSOR U
Page 55 and 56: RXF ROTARY SCREW COMPRESSOR UNITS F
Page 61 and 62: Heat-sink paste, 8 high-stage opera
Page 63: RXF ROTARY SCREW COMPRESSOR UNITS N
show all

Rxf - Johnson Controls Inc.

Create successful ePaper yourself

Delete template?

Save as template?