COP 1132 - Atlas Copco

Technical data
COP 1132
Impact power, max. 11 kW
Hydraulic pressure, max. 210 bar
Impact rate 100 Hz
Lubrication air (at the drill), min. 3 bar
Flushing water, max. 25 bar
Weight, with adapter 75 kg
Length, without adapter 735 mm
Width 291 mm
Height 154 mm
Height above drilling centre 77 mm
Adapters
Male adapter, Ø 35 mm, L = 410 mm
Thread type R28, Ordering No. 407-15701,00
Male adapter, Ø 35 mm, L = 410 mm
Thread type SR28, Ordering No. 425-15701,00
Male adapter, Ø 35 mm, L = 500 mm
Thread type SR28, Ordering No. 425-15704,00
Male adapter, Ø 35 mm, L = 410 mm
Thread type R32, Ordering No. 403-15701,00
Male adapter, Ø 35 mm, L = 500 mm
Thread type R32, Ordering No. 403-15704,00
Female adapter, Ø 45 mm. L = 280 mm
Thread type R32, Ordering No. 403-15703-F,00
Rotation motors
OMP 80
Torque (measured on the drill steel), max. continously/temporary 220/330 Nm
Rotation speed (measured on the drill steel), max. 500 rpm
Hydraulic pressure, max. continously/temporary
OMP 125
140/225 bar
Torque (measured on the drill steel), max. continously/temporary 360/550 Nm
Rotation speed (measured on the drill steel), max. 320 rpm
Hydraulic pressure, max. continously/temporary 140/225 bar
Suitable drill rigs
Bolt-hole drilling
Boltec 235, MC, MD, LC, LD and similar bolting rigs.
Tunneling
Boomer 104, 281, 282 and similar drill rigs.
TOTAL ROCK DRILLING TECHNOLOGY ®
The short lightweight body makes COP
1132 ideal for bolt-hole drilling in confined
spaces. Here the drill is shown mounted on a
Boltec for semi-automatic bolting.
The manufacturer reserves the right to make
9851 2371 01 modifications without prior notice. 2006.09 CIAA AB Printed in Sweden