Geon 186A - Excel Polymers
Geon 186A - Excel Polymers
Geon 186A - Excel Polymers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TECHNICAL DATA SHEET<br />
GEON SPECIALTY DISPERSION (FOAM) RESIN<br />
GEON ® <strong>186A</strong><br />
VINYL CHLORIDE HOMOPOLYMER<br />
BENEFITS<br />
− Medium molecular weight resin providing a good balance of fused film<br />
physical properties and fusion characteristics<br />
− <strong>Excel</strong>lent chemical foam characteristics with good overblow resistance<br />
− Good dispersability for easier plastisol preparation<br />
RECOMMENDED USES<br />
<strong>Geon</strong> ® <strong>186A</strong> is recommended for applications where an overall balance of good<br />
rheological and fused film physical properties are required, such as:<br />
1. Low density chemically blown foams<br />
2. Fabric coating applications requiring low “wicking” characteristics<br />
3. Plastisol printing inks<br />
TYPICAL PROPERTIES (1)<br />
Typical Resin Properties<br />
Inherent Viscosity (ASTM-D-1243-60-A) 0.98<br />
Relative Viscosity (Cyclohexanone 1%) 2.34<br />
K-Value 69<br />
Degree of Polymerization 1180<br />
Methanol Extractables (<strong>Geon</strong> ® 894) 3.6%<br />
% Moisture (Karl Fisher 683) 0.06%<br />
Appearance Fine White Powder<br />
Bulk Density 20 -25 lbs./cu. ft.<br />
0.34-0.42 gm/cc<br />
Specific Gravity 1.40<br />
Typical Plastisol Properties (2)<br />
Initial Brookfield Viscosity - V12 (<strong>Geon</strong> ® 1010) 7,200 cps<br />
One-Day Brookfield Viscosity-V12 (<strong>Geon</strong> ® 1010) 17,400 cps<br />
Severs Efflux - 95 psi (<strong>Geon</strong> ® 1010) 27.8 gms./100 sec.<br />
North Fineness (<strong>Geon</strong> ® 390) 5.0<br />
Typical Plastisol Properties (3)<br />
Gel Temperature (ALTC-29) 160°F<br />
71°C<br />
Clarity - Light Transmittance (ALTC 66) 77%<br />
Gloss - 60° (ALTC 65) 85% reflectance<br />
Optimum Tensile (ASTM-D-638) 2,500 psi<br />
17.2 mPa<br />
Elongation at Optimum Tensile (ASTM-D-412) 360%<br />
(1)<br />
The values set forth represent “typical” values and The <strong>Geon</strong> Company, therefore,<br />
makes no representation that the material in any particular shipment will conform to the<br />
listed properties.<br />
(2) ®<br />
Formulation: 100 parts <strong>Geon</strong> <strong>186A</strong>, 60 parts DOP<br />
(3) ®<br />
Formulation: 100 parts <strong>Geon</strong> <strong>186A</strong>, 57 parts DOP, 3 parts ESO,<br />
2 parts Synpron 940<br />
SERVICE VALUE RELIABILITY
BROOKFIELD VISCOSITY (CPS)<br />
40000<br />
30000<br />
20000<br />
10000<br />
0<br />
2 RPM<br />
20 RPM<br />
BROOKFIELD VISCOSITY<br />
AGING CHARACTERISTICS<br />
YIELD<br />
0 1 2 3 4 5 6 7<br />
TIME (DAYS)<br />
FORMULATION: 100 PHR RESIN, 57 PHR DOP, 3 PHR ESO, 2 PHR SYNPRON 940<br />
MANUFACTURING<br />
<strong>Geon</strong> ® <strong>186A</strong> is produced at The <strong>Geon</strong> Company’s Pedricktown, NJ facility, which is ISO 9002 certified.<br />
PACKAGING<br />
Shipped in multi-wall paper bags, net weight 50 pounds, 2,500 pounds per pallet. Information shown on the package<br />
includes commercial identification number, lot number and net weight.<br />
PolyOne © Corporation, 1997<br />
PolyOne © Corporation<br />
The information contained herein is believed to<br />
be reliable, but no representations, guarantees<br />
or warranties of any kind are made as to its<br />
accuracy, suitability for particular applications<br />
or the results to be obtained therefrom. The<br />
information is based on laboratory work with<br />
small-scale equipment and does not<br />
necessarily indicate end product performance.<br />
Because of variations in methods, conditions<br />
and equipment used commercially in<br />
processing these materials, no warranties or<br />
guarantees are made as to suitability of the<br />
products for the application disclosed. Fullscale<br />
testing and end product performance<br />
are the responsibility of the user. PolyOne<br />
shall not be liable for and the customer<br />
assumes all risk and liability of any use or<br />
handling of any material beyond PolyOne's<br />
direct<br />
3<br />
2.5<br />
2<br />
1.5<br />
1<br />
YIELD<br />
control. POLYONE MAKES NO<br />
WARRANTIES, EXPRESS OR IMPLIED,<br />
INCLUDING, BUT NOT LIMITED TO, THE<br />
IMPLIED WARRANTIES OF<br />
MERCHANTABILITY AND FITNESS FOR A<br />
PARTICULAR PURPOSE. Nothing contained<br />
herein is to be considered as permission,<br />
recommendation, nor as an inducement to<br />
practice any patented invention without<br />
permission of the patent owner.<br />
Printed in U.S.A. PolyOne Corporation April, 1997