Apus Product card.pdf - NunnaUuni
Apus Product card.pdf - NunnaUuni
Apus Product card.pdf - NunnaUuni
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
03/11<br />
LAYOUT DRAWINGS:<br />
APUS 3 YL & PL<br />
The bottom plinth is 12 mm smaller in every side than the outer measurements of the product.<br />
PL = Top connection<br />
YL = Upper connection from behind<br />
APUS 3 YL & PL<br />
APUS 4 YL & PL APUS 7 YL & PL<br />
APUS 4 YL & PL,<br />
APUS 7 YL & PL<br />
PRODUCT INFORMATION:<br />
Thermal energy: 54-60 kWh<br />
Energy effi ciency: 79 %<br />
CO%: 0,1 %<br />
Nominal heat output: 1,3 kW / 15,5 hours<br />
Heat storage capacity:<br />
PRODUCT NUMBER:<br />
100% after 8,5 hours<br />
50% after 28,1 hours<br />
25% after 45,6 hours<br />
APUS<br />
<strong>Product</strong> <strong>Product</strong> number Weight kg Height mm<br />
APUS 3 YL 2NSTY-3 1750 1872<br />
APUS 4 YL 2NSTY-4 1710 1872<br />
APUS 7 YL 2NSTY-7 1710 1872<br />
APUS 3 PL 2NSTP-3 1750 1872<br />
APUS 4 PL 2NSTP-4 1710 1872<br />
APUS 7 PL 2NSTP-7 1710 1872<br />
NEEDED FOR ASSEMBLY:<br />
* Mortar 1 x 25 kg (not included in <strong>NunnaUuni</strong> delivery)<br />
<strong>NunnaUuni</strong> Oy reserves the right to make alterations
PRODUCTINFORMATION<br />
FLUE CONNECTION TABLE<br />
SAFETY DISTANCES TO COMBUSTIBLE MATERIALS<br />
According to EN 15250<br />
Behind On the<br />
sides<br />
<strong>Apus</strong> PL 50 50<br />
<strong>Apus</strong> YL (2 50 50<br />
1) The fl ue calculation values apply for countries that require fl ue calculation in accordance with the DIN 18160 and DIN EN 13384 standards. It is recommendable to contact<br />
chimney sweeper beforehand.<br />
2) YL = Upper connection from behind<br />
Take a notice of the countryspecifi c approvals in section 3<br />
NOTES!<br />
BAKING OVEN /<br />
BAKING SPACE<br />
Width<br />
[mm]<br />
approx.<br />
150x150<br />
Depth<br />
[mm]<br />
RECOMMENDED FLUE [mm] FLUE CONNECTION MEASUREMENTS [mm] INCOMING AIR<br />
approx.<br />
150x200<br />
Length<br />
fi replace /<br />
cooker<br />
[cm]<br />
approx.<br />
150x300<br />
FIREWOOD FLUE CALCULATION VALUES (1<br />
Max<br />
amount of<br />
wood<br />
[kg]<br />
Length<br />
baking oven<br />
[cm]<br />
round<br />
Ø [A] [B]<br />
Flue gas<br />
temperature<br />
[°C]<br />
Min. fl ue<br />
draught<br />
[Pa]<br />
The fl ue heat category required by the fi replace is T350.<br />
The recommended minimum fl ue height is 5 m with Ø180 mm. In countries where the fl ue calculation is required, should the calculation be done according to the instructions<br />
and regulations of the fl ue calculation.<br />
A damper designed for adjusting the draft is always recommended for a fl ue connection or fl ue.<br />
Country- and region-specifi c regulations must be adhered to when installing the fi replace<br />
[C]<br />
Mass fl ow<br />
[g/s]<br />
Incoming air<br />
pipe location<br />
L [mm]<br />
Burning heat<br />
output [kW]<br />
Replacement<br />
air<br />
unit<br />
Flue<br />
connection<br />
[A/B] Ø<br />
<strong>Apus</strong> PL - - 33 16 - 230 13 32,8 33,2 150 70<br />
<strong>Apus</strong> YL (2 - - 33 16 - 230 13 32,8 33,2 150 70<br />
<strong>Apus</strong> PL - - - 150 - - - 428 - 910273<br />
<strong>Apus</strong> YL (2 x x - 150-180 Ø 160 - 1710 428 - 910273<br />
03/11 <strong>NunnaUuni</strong> Oy reserves the right to make alterations<br />
HRT<br />
Burning air<br />
approx.<br />
m³/h
Change language