Technische Alternative - Varmt vand fra solen

Pump speed control PSC:
Abs. value control AC….. __…__ / ex = -- Desired value DVA….. ____°C / ex = 50°C
Differential regulator DC.. __…__ / ex = -- Desired value DVD….. ____ K / ex = 10K
Event regulator EC…...... __…__ / ex = -- Threshold value TVE.. ____°C / ex = 60°C
Desired value DVE….. ____°C / ex = 130°C
Waveform…………….…. _____ / ex = WAVEP
Proportional part PRO…. _____ / ex = 5
Integral part INT………… _____ / ex = 0
Differential part DIF…….. _____ / ex = 0
Minimum speed MIN….... _____ / ex = 0 Maximum speed MAX ____ / ex = 30
Maintenance:
If used properly, the system does not require maintenance. A cloth moistened with a soft
alcohol (such as spirit) should be used for cleaning. Harsh solvents such as chlorethenes or
tri-gases are not admissible.
As the components relevant to accuracy are not subjected to loads if used properly, longterm
deviation is very low. The unit thus cannot be adjusted. Hence, no calibration is possible.
The construction characteristics of the unit must not be changed for repairs. Spare parts
must correspond to the original parts and be used as intended.
Safety requirements
The unit is state-of-the-art technology and fulfils all of the necessary safety regulations. It
may only be used in accordance with the technical data and the safety requirements and
regulations below. In using the unit, the safety regulations and laws for each specific application
also have to be upheld.
Safe operation is no possible if the unit
…. is obviously damaged,
…. not longer works,
…. was stored for a long time under poor conditions.
If these cases apply, the unit must be taken out of operation and prevented from accidentally
going into operation.
We reserve the right to make technical changes. © 2006
37