Product catalogue – Marine - NET

Product catalogue – Marine 

Fire detection and alarm systems

Objective, vision and values 

Protection of life and property 

We have one overriding principle: Our products offer customised solutions and maximum safety according to 

marine rules and regulations. Our fire alarm systems, which are based on standard modules, may be delivered as 

stand alone systems or communicate in integrated networks. 

World-wide 

The brand Eltek Fire Safety is owned by the international company Honeywell (www.honeywell.com), - one of 30 

selected Dow Jones Companies. Honeywell Life Safety AS (HLS), a distribution company within the division 

Automation and Control Solution in Honeywell, is responsible for the sales to the marine market world wide. 

User-friendly technology 

In-house developed, leading-edge technology provides users with superior safety and flexibility enabling future 

upgrading and expansion. The system philosophy allows communication between different units. The result is 

maximum safety, increased user-friendliness and the best total economy. 

Sales 

Our products are distributed through a worldwide network of dedicated agents and/or distributors offering our global 

operating customers local support and technical know how. 

Engineering 

Our marine engineering department provides tailor-made solutions based on customer inputs, class requirements 

and system design. The demand for safety, reliability and user friendliness is always considered. This requires 

know-how – built up during decades through our engagement in the marine market. 

Service 

• Service world-wide through our dedicated service partner. 

• Service performed by authorised personnel means that quality is maintained year after year. 

• Service contracts result in reliable operation and cheaper maintenance. 

• Repairs in accordance to manufacturer’s specifications. 

• Repairs subject to the same test procedures and guarantees as new equipment. 

• Remote monitoring via modem gives security. 

TechZone 

On our webpage www.eltek-fs.com you will find TechZone which is an internet service for the distribution of 

technical publications and other information. As our guest you can download product datasheets and other general 

information. As a VIP-member you will get access to publications concerning installation, service guidelines, 

operation, trouble- shooting, other technical documents and the opportunity to download software. 

2 (34)

Terms and abbreviations 

DELTA TECHNOLOGY: 

An expression covering Eltek Fire & Safety’s modular theory - EN54 compatible and flexible - that uses the latest, 

user friendly logic in networksystems, operational concepts and alarm signal evaluation. 

DELTA COMPACT: 

Eltek Fire & Safety's complete fire alarm panel, featuring in one cabinet the following modules as standard: 

DELTA OP, DELTA DA and batteries. 

DELTA OP: 

Eltek Fire & Safety’s operating panel used as the main control and display-unit – either as a fire-fighter’s or repeater 

panel – with possibilities for complete control of the fire alarm system. The DELTA OP panel allows for adjustment 

of the discovery detectors. 

DELTA REPEATER: 

Eltek Fire & Safety’s remote control and display unit – repeater panel. 

DELTA DA: 

Eltek Fire & Safety’s analogue, addressable and/or conventional fire Detection and Alarm module. The module has 

connections for detector loops, alarm and control circuits and communication ports. The DA module is also 

equipped with built-in power supply and charging units. 

DELTA NET: 

Eltek Fire & Safety fire alarm network where DELTA modules communicate via 2 two wire cables, where one is 

used as an emergency alarm line and the other as an eBus line. 

eBus: 

Eltek Fire & Safety’s bus for multi-master network communication between the DELTA familiy of fire alarm units. 

The eBus network is based on intelligent control nodes (eNodes) that communicate with each other via eComm. 

The nodes also implement the physical interface between the node’s microprocessor and the eBus. 

eComm: 

Eltek Fire & Safety’s communication protocol for fire alarm units connected to the multi-master and eBus network. 

eNode: 

Eltek Fire & Safety’s communication unit for the fire alarm modules connected to the multi-master eBus network. 

EMERGENCY ALARM LINE: 

To avoid loss of alarm signals due to a communication fault in the alarm system network, the DELTA modules have 

built-in, galvanic, insulated, electronics for hardware detection of fire alarms (emergency alarm). 

3 (34)

Delta system topology 

Main work station 

FireWin Presentation 

Ethernet 

modem 

Delta network eBus 

eNode 

Delta 

Decentralised 

solution 

Delta system configuration 

160 units in the system 

255 loops in the system 

126 detectors/loop 

Back-up work station/s 

FireWin Presentation 

Ethernet 

modem 

ModBus protocol 

IAS work station 

Vessel Management 

eNode 

4 (34) 

Ethernet 

modem 

Delta 

Compact 

solution 

VDR 

SMS 

Delta 

Em. light 

Delta 

Terminal 

Ethernet 

modem 

eNode 

Marine approved by major class societies such as 

ABS, BV, DNV, GL, LRS… 

By choosing a DELTA fire detection and alarm solution from Eltek Fire & Safety by Honeywell you obtain a system 

with increased safety focus, reduced installation cost, easy maintenance, less spare parts and a solution which is 

in compliance with the various requirements for marine applications. 

From the same basic modules, we configure and supply customised system solutions to suit your needs. 

The embedded DELTA Technology has the unique features you would find in all the system from Eltek Fire & 

Safety. This includes DELTA Logic+, which with artificial intelligence prevents false alarms, allows for flexible use 

of space and reports pre-alarms or fire alarms in the event of fire hazard. 

The functionality of DELTA Logic+ is implemented in every DELTA OP panel, DELTA DA module and every fire 

detector. DELTA Logic+ evaluates a fire hazard based on several criteria - programmed during commissioning - 

such as operational experience data, environmental influences, change of use in premises, etc.

Delta FireWin 

FireWin presentation and control software 

Two PC-software packets have been developed for programming Eltek Fire & Safety control units and networks. 

FireWin is a Windows-program that can be set up in the vessels control room, bride, communication centre etc. 

Via this program all the normal functions of the Delta OP can be accessed. Graphics of deck plans showing 

detectors and fire doors etc. are fed into the system. This then gives a visual indication of the detector giving an 

alarm signal or those that are non-operative. By means of these indications it is possible to follow the course of a 

fire situation and therefore to give value added information in order for the crew onboard to take corrective actions. 

FireWin Explorer is a programming tool for setting up a fire-alarm system and configuration of a network. 

Technicians use it when they install or service a system. The logical sequence of screen displays ensures the 

correct set-up of detector addresses and alarm values. 

5 (34)

Delta Product Range - Marine 

COMPACT CONTROL UNITS - CONVENTIONAL 

Data: Description: List price: 

Art. no. 251062.3 

Delta Compact 5 loops w/eBus conventional 

The Delta Compact is a centralised fire detection and alarm control unit that complies with 

EN 54.2 and EN 54.4. The unit consists of DELTA OP control panel, DELTA DA module 

(incl. power-supply), ebus and batteries. 

Features: 

5 loops, 

3 monitored voltage outputs (e.g. alarm circuits), 

2 voltage-free relay outputs 

1 monitored multi-function output. 

Supplied with built-in batteries for 72 hours of emergency operation. 

Approvals: DNV, GL, LR, ABS and BV 

DECENTRALIZED CONTROL UNITS - CONVENTIONAL 

Art. no. 251072.5 

Art. no. 251073.10 

Delta decentralized 5 loops w/eBus conventional 

The Delta unit is a decentralized fire detection and alarm control unit that complies with EN 

54.2 and EN 54.4. The unit may be used together with the DELTA OP or as either a stand 

alone control unit in a network. The Delta unit consist of a Delta DA module (incl. powersupply), 

ebus and batteries. 

Features: 

5 loops, 






Delta decentralized Quad 10 loops w/eBus conventional 





Features: 

10 loops, 






6 (34)


OPERATOR PANELS for both addressable & conventional decentralized control units 


Art. no. 251261.1 

Art. No. 251157.1 

Delta OP flush mounted w/eBus 

The flush-mounted version of the Delta OP only protrudes 5 mm above its surroundings. 

The Delta OP conforms to the requirements for operating-units in fire-alarm networks 

stated in NS-EN-54.2. 

Features: 

graphic display, 

output for programmable control of 64 LED’s, 

Incorporates communication port for eBus or RS 485. 

input for direct PC programming of connected units 

Communication: 

Slave/master on RS 485 and network, eBus on RS 232 and external communication on 

RS 232 with provision for hook-up to printer, PC, beeper etc.. NMEA 0183 to VDR. 


Delta OP wall mounted w/eBus 

The operating panel is primarily used as an operating unit in Delta network system. 

The Delta OP meets the NS-EN-54.2. 

Features: 

graphic display, 

output for programmable control of 64 LED’s, 

Incorporates communication port for eBus or RS 485. 

Input for direct PC programming of connected units 

Communication: 

Slave/master on RS 485 and network, eBus on RS 232 and external communication on 

RS 232 with provision for hook-up to printer, PC, beeper etc.. NMEA 0183 to VDR. 


7 (34)


COMPACT CONTROL UNITS - ADDRESSABLE 


Art. no. 251808.2 

Art. no. 251808.4 

Art. no. 251808.10 

Delta Compact Quad 2 loops addressable 



(incl. power-supply) and batteries. 

Features: 

2 analogue loops, 






Delta Compact Quad 2 loops w/eBus addressable 




Features: 







Delta Compact 2 loops w/eBus and converter addressable 




Features: 

2 loops, 




1 24/12 VDC Converter 



8 (34)


DECENTRALIZED CONTROL UNITS - ADDRESSABLE 

Data: Description: Price NOK: 

Art. no. 251807.2 

Art. no. 251807.4 

Delta decentralized Quad 2 loops w/eBus addressable 





Features: 







Delta decentralized Quad 4 loops w/eBus addressable 





Features: 







9 (34)


NETWORK and COMMUNICATION MODULES 

Data: Description: Price NOK: 

Art. no. 251800.1 

Art. no. 251245.2 

Art. no. 235762 

PA-MUTE KIT 

Art. no. 251373.1 

Delta addressable DA Quad w/eBus 

Cost-effective detection and alarm-module for decentralised solutions. Fully meets EN 

54.2 requirements regarding fail-safe networks. The Delta DA is operated via the Delta OP 

panel. 

Features: 


3 monitored voltage outputs (e.g. alarm-bell circuits), 



1 eBus (LON-kit) 


Delta conventional DA w/eBus 

Cost-effective detection and alarm-module for decentralised solutions. Fully meets EN 

54.2 requirements regarding fail-safe networks. The Delta DA is operated via the Delta OP 

panel. 

Features: 

5 conventional loops, 

3 monitored voltage outputs (e.g. alarm-bell circuits), 



1 eBus (LON-kit) 


eNode 

eNode is a marine approved interface between the FireWin PC and the communication 

network. 

The eNode is also used as an interface unit for all the fire alarm modules connected to the 

multi-master eBus network. 

Approvals: DNV 

Kit for muting the Fire Alarm 

The kit consists of a printed circuit board and a cable. When the kit is installed inside the 

DELTA OP it enables an input from the PA system to mute the fire alarm system. 

10 (34)


DETECTORS – ADDRESSABLE range IQ8 


Art. no. 802371 

Art. no. 802373 

Art. no. 802374 

IQ8 optical smoke detector, type O 

Automatic point-type fire detector with built-in scatter sensor with processor-controlled 

signal processing and decentralised intelligence. Suitable for the early detection of 

smouldering fires. 

Features: 

-slimline design 

-built-in isolator, in compliance with pr EN 54-17 

-centralised 360° alarm indicator 

-individual operating display 

-alarm and operating data storage, built-in operating hours counter 

-approved in compliance with EN 54-7 

-powered loop compatible 


IQ8 multisensor, type OT 

Multisensor with built-in optical smoke sensor and additional heat detector, sensor 

evaluation, with time-based signal analysis and signal correlation of both sensors for 

detecting smouldering fires with strong heat generation. Intelligent fire detector with 

decentralised intelligence, automatic function self-test, emergency mode, automatic 

adaptation to the environments, alarm and operating data storage, alarm indication and 

soft addressing. 

Features: 





-360° thermal monitoring with one sensor 


-time and event controlled deactivation of sensors 



IQ8 multisensor, type O 2 T 

Multisensor detector with two built-in optical smoke sensors with different scattered light 

angles as well as additional heat detector sensor evaluation for detecting everything from 

smouldering fires to open fires with consistent response behaviour. Smoke sensor signal 

identification to ensure smoke classification and reduction of deceptive alarms caused, for 

instance, by water vapour or dust. 

Features: 





-detection using the forward and backward scatter principle 




-approved in compliance with DIN EN 54-7/5 B2, CEA 4021 



11 (34)




Art. no. 802375 

Art. no. 802473 

Art. no. 802171 

IQ8 multisensor optical smoke and heat, Type OT blue 

Multisensor detector with built-in optical smoke and heat detector to ensure preventive fire 

detection. The detector uses blue light and is meant to replace the traditionally used Ione 

detector. Through combined scattered light, temperature and gas evaluation, the early 

detection of everything from smouldering fires to open fires is guaranteed. 

Features: 








-approved in compliance with DIN EN 54-7/5 A1S, CEA 4021 



IQ8 multisensor, Type OTG 

Multisensor detector with built-in optical smoke detector, heat sensor as well as a built-in 

sensor for detecting carbon monoxide to ensure preventive fire detection. Through 

combined scattered light, temperature and gas evaluation, the early detection of everything 

from smouldering fires to open fires is guaranteed. 

Features: 








-approved in compliance with DIN EN 54-7/5 A1S, CEA 4021 



IQ8 fixed heat detector, type Tmax 

Heat detector with integrated limit value actuation (60°C) for the detection of fires with 

slowly rising temperature. Detector with processor-controlled signal processing and 

decentralised intelligence. 

Features: 





-constant response behaviour for detecting slowly and quickly rising temperatures 



-approved in compliance with EN 54 T 5 A1 



12 (34)




Art. no. 802271 

IQ8 rate-of-rise heat detector, type T 

Heat detector with fast semiconductor sensor to guarantee safe detection of fires with 

quickly rising temperature. The detector is also fitted with integrated limit value actuation 

(60°C) for the detection of fires with slowly rising temperature. Detector with processorcontrolled 

signal processing and decentralised intelligence. 

Features: 





-constant response behaviour for detecting slowly and quickly rising temperatures 



-approved in compliance with EN 54 T 5 A1 



13 (34)


DETECTORS – ADDRESSABLE range IQ8QUAD 


Art. no. 802382 

Art. no. 802383 

IQ8QUAD multisensor with integrated sounder, type O/So 

Scatter smoke detector for safe and early detection of mouldering fires with light smoke 

generation. Intelligent detector with decentralised intelligence, automatic function self-test, 

CPU failure mode, alarm and operating data memory, alarm indicator, soft-addressing and 

operating indication. The detector is provided with a loop isolator. Along with smoke 

detection components, the detector is provided with a built-in sounder. 

Features: 










-built-in bus supplied and optical alarm signalling device 

-3.5km maximum loop length 


IQ8QUAD multisensor with integrated flash, type O 2 T/F 



smouldering fires to open fires with consistent response behaviour. The detector is 

provided with a built-in loop isolator and a built-in, bus supplied optical alarm signalling 

device. Smoke sensor signal identification to ensure smoke classification and reduction of 

deceptive alarms caused, for instance, by water vapour or dust. The maximum loop length 

amounts to 3.5km. 

Features: 










-built-in bus supplied and optical alarm signalling device 



14 (34)


DETECTORS – ADDRESSABLE range IQ8QUAD 


Art. no. 802384 

Art. no. 802385 

IQ8QUAD multisensor with integrated sounder, type O 2 T/So 




provided with a built-in loop isolator and a built-in alarm signalling device. Smoke sensor 

signal identification to ensure smoke classification and reduction of deceptive alarms 

caused, for instance, by water vapour or dust. Decentralised storage of up to 19 freely 

programmable tone models in the detector. The volume control can be adjusted in 8 levels 

with additional event based programming of the volume damping level. As a precaution, a 

soft-start mode for optimum rising sound levels of the alarm volume can be selected. The 

respective alarm tone can be played with a maximum repetition rate of four times for each 

alarm. The maximum loop length amounts to 3.5km. 

Features: 










-built-in bus supplied alarm signalling device 

-Soft-start mode for protection against sudden exposure to acoustic alarm signalling 



IQ8QUAD multisensor w/ Sounder, flash and speech, type O2T/FSp 




provided with a built-in loop isolator and a built-in, bus supplied optical and acoustic alarm 

signalling device. Smoke sensor signal identification to ensure smoke classification and 

reduction of deceptive alarms caused, for instance, by water vapour or dust. Decentralised 

storage of up to 19 freely programmable tone models as well as up to four additional texts, 

each announced in three languages, in the detector. The volume control can be adjusted in 

8 levels with additional event based programming of the volume damping level. For 

protecting people, a soft-start mode for optimum rising sound levels of the alarm volume 

can be selected. The respective alarm tone can be played with a maximum repetition rate 

of four times for each alarm. The maximum loop length amounts to 3.5km. 

Features 










-built-in bus supplied optical and acoustic alarm signalling device 

-multilingual announcement texts in the detector 

-soft-start mode for optimum protection against sudden exposure to acoustic alarm 



15 (34)


BASES for the addressable IQ8 / IQ8QUAD detectors 


Art. no. 805590 

Art. no. 805591 

Art. no. 805591.01 

Art. no. 805572 

Art. no. 805571 

IQ8 base 

Standard detector base for IQ8 / IQ8QUAD detectors. 

IQ8 base, relay for NO w/alarm 

Detector base for IQ8 detectors with relay contact output. 

Contact: floating NO. 

Note: Not to be used with IQ8QUAD detectors 

IQ8 base, relay for NC 

IQ8 detector base with relay contact output. 

Contact: floating NC. 

Note: Not to be used with IQ8QUAD detectors 

IQ8 base, sealed for watertight applications 

• IP 65 

Requires art. no. 805590, 805591 or 805591.01 to complete the base. 

Note: 805591 or 805591.01 can not be used with IQ8QUAD detectors 

IQ8 base adapter flush mounting 

Adapter for installation in ceilings and for mounting the detector bases to the bottom side of 

false ceilings. 

Require art. no. 805590, 805591 or 805591.01 to complete the base 

Note: 805591 or 805591.01 can not be used with IQ8QUAD detectors 

16 (34)


DETECTORS – CONVENTIONAL range 


Art. no. 251604.08 

Art. no. 251604.09 

Art. no. 251604.02 

Art. no. 251604.03 

Art. no. 251604.04 

Orbis optical smoke detector 

Photo-electric detection of light scattered by smoke particles over a wide range of angles. 

The optical arrangement comprises an infra-red emitter with a prism and a photo-diode at 

90° to the light beam with a wide field of view. The detector’s microprocessor uses 

algorithms to process the sensor readings. 


Orbis multisensor smoke detector 

Photo-electric detection of light scattered by smoke particles over a wide range of angles. 

The optical arrangement comprises an infra-red emitter with a prism and a photo-diode at 

90° to the light beam with a wide field of view. The detector’s microprocessor uses 

algorithms to process the sensor readings. The heat sensing element increases the 

sensitivity of the detector as the temperature rises. 


Orbis heat detector A1R for maximum application temp: 50°C 

Are temperatures in excess of 65°C likely in normal operation? NO 

Does the room have a maximum temperature greater than 50°C? NO 

Are sudden increases in heat likely in normal operations? NO 

If your application is as above, your choice should be: A1R 


Orbis heat detector A2S for maximum application temp: 50°C 


Does the room have a maximum temperature greater than 50°C? NO 

Are sudden increases in heat likely in normal operations? YES 

Is the detector likely to be at or below freezing (0°C) in normal operation: NO 

If your application is as above, your choice should be: A2S 


Orbis heat detector BR for maximum application temp: 65°C 

Are temperatures in excess of of 65°C likely in normal operation? NO 

Does the room have a maximum temperature greater than 50°C? YES 

Are sudden increases in heat likely in normal operations? NO 

If your application is as above, your choice should be: BR 


17 (34)


DETECTORS – CONVENTIONAL range 


Art. no. 251604.05 

Art. no. 251604.07 

Orbis heat detector BS for maximum application temp: 65°C 


Does the room have a maximum temperature greater than 50°C? YES 


If your application is as above, your choice should be: BS 


Orbis heat detector CS for maximum application temp: 80°C 

Are temperatures in excess of 65°C likely in normal operation? YES 


If your application is as above, your choice should be: CS 


BASES for the conventional Orbis detectors 

Art. no. 251604 

Art. no. 251604.01 

Art. no. 235562 

Orbis base 

• Operating Voltage: 10 – 33 VDC 

• Alarm current: 30 – 45 µA 

• Weight: 60g 

• Material: White polycarbonate 

Orbis base with relay 

• Operating Voltage: 10 – 33 VDC 

• Alarm current: 7mA at 24 VDC 

• Contact: NO / NC 

• Weight: 60g 

• Material: White polycarbonate 

Orbis base, for watertight applications 

• IP 65 

18 (34)


HEAT DETECTORS FOR SAUNA and COLD STORE 


Art. no. 242963 

Art. no. 242963.01 

Art. no. 805864 

FLAME DETECTORS 

Art. no. 243019.01 

Art. no. 251811.10 

Heat detector sealed SW-1K, 140dgr, IP67 


Heat detector sealed SW-1K, 60dgr, IP67 


Address unit 1 in/1 out IP54 

An interface unit connected to art.no. 242923 and 242963.01 for the usage in an 

addressable system 

Conventional flame detector 601F-M 

The 601F-M is a full featured solar blind flame detector for enclosed use and boasts a high 

degree of false alarm immunity. The 601F-M is designed for connection to a conventional 

zone of point type fire detectors that may include any mix of detection technologies. 

Features: 

Unlike UV and UV/IR detection, not blinded by oil mist in machinery spaces 

Reduces cabling, no interface required 

No additional power source required 

Easy installation, uses a common plug in base for smoke and heat detectors 


Address unit 

• Supply Voltage: 230 VAC 

• Alarm resistor: 470ohm/2W 

• Quiescent current pr zone: 6mA 

The unit consists of a 230VAC/12VDC power converter and the refurbishment transponder 

unit art no 808630. 

19 (34)


EX EQUIPMENT 


Art. no. 251601.01 

Art. no. 251601.02 

Art. no. 251601.04 

Art. No. 251601.03 

Art. no. 251811 

Optical smoke detector conventional: MF601Ex 

• Supply Voltage: 16 – 28 VDC 

• Alarm current: 48mA typical 

• Quiescent current: 100µA typical 

• Alarm indication. LED red 


Optical heat detector conventional: MF601Ex 

• Supply Voltage: 16 – 28 VDC 

• Alarm current: 48mA typical 

• Quiescent current: 100µA typical 

• Alarm indication. LED red 


Base 600/800 Ex 

• To be used together with detectors art.no 251601, 251601.01 & 251601.02 

Base for watertight applications, DHM69 

• IP rating: 65 

• To be used together with art.no 251601, 251601.01 & 251601.02 

Address unit Ex 

• Supply Voltage: 230 VAC 

• Alarm current: 470R/2W 

• Quiescent current pr zone: 6mA 

• 1 input for EX detectors which includes zener barrier (art. No: 07099) 

• 3 inputs which requires additional zener barrier art. No: 07099 

20 (34)


EX EQUIPMENT 


Art. no. 07099 

Art. no. 235525 

Art. no 251561 

Art. no. 251589 

Zener barrier: KFD0-CS-Ex1.51P 

• IP rating: IP20 

• Voltage rating: Loop powered 

• Rated voltage: 4 - 35VDC 

• Current: 0-40 mA 

• EEx ia IIC 

• EMC acc. to NAMUR NE 21 

Zener barrier Conventional 

To be used together with conventional Ex detectors series MF601 

Manual call point EX: MEDC 

• Conventional 


Alarm siren DB7 EExia 


• Sound output: 103dB 

• Voltage rating: 24VDC 

• Alarm current: 14mA 

21 (34)


MANUAL CALL POINTS – For conventional system 


Art. no. 251615 

Manual call point w/isolator 


• Voltage rating: 8 – 42 VDC (for 12VDC supply) 

• Rated voltage: 19VDC 

• Alarm current: Typical 9mA, pulsed 

Art. no. 243037 Surface mounting base for manual call point 

To be used together with art.no 251615 

Art. no. 251615.10 Hinged Cover for manual call point 

Art. no. 234800 


Manual call point w/cover 





MANUAL CALL POINTS – For addressable system 

Art. no. 804971 

Manual call point w/isolator 

• IP rating: IP43 (IP55 with hinged cover art no.:704965) 





Art. no. 704980 Surface mounting base for manual call point 


Art. no. 704965 Hinged Cover for manual call point 


GENERAL ALARM UNIT – For addressable & conventional system 

Art. no. 251406 

General Alarm 

• Switch: On/off 


• Max Voltage: 230VAC 50Hz 

• Operating temp: -25…55°C 

22 (34)


I/O and ADDRESS UNITS 


Art. no. 788611 

Art. no. 788612 

Art. no. 805863 

Art. no. 805864 

Art. no. 804864 

Bus transponder unit 32 LEDS 

Driver PCB for DELTA mimic to be connected to the loop in order to display fire 

doors, fire dampers, fire zones etc. 

Isolator 

Plug-in isolator for the address units. To be used for isolating loops between decks or to 

isolate short circuit failure on the loop etc. 

Technical Alarm Module, 1 input/isolator 


• Loop powered 

• Alarm indicator: LED 5 mm, red 

Technical Alarm Module, 1 input/1 output 



• Output: 1 relay NC/NO 


Technical Alarm Module, 1 input/1 output 



• Output: 1 relay NC/NO 


23 (34)




Art. no. 804869 

Art. no. 808610 

Art. no. 808613 

Art. no. 808617 

Art. no. 808630 

Technical Alarm Module, DIN-rail mounted 

The technical alarm module is a bus device of the fire alarm system for recognition, 

transmission and individual display of technical alarms. 

Each module includes an integrated loop isolator, which opens in case of loop short circuit 

to isolate the part of the loop between two loop isolators. A single wire break does not 

affect the loop and all devices remain in operation. The module does not require external 

voltage supply, as voltage is supplied by the field bus. 

Address unit: 12R 

• IP rating: 40 (IP54 when fitted in housing art.no.788650) 

• Supply voltage rating: 12 – 24 VDC 

• Analogue loop voltage:19 – 42 VDC 

• Current consumption:




Art. no. 788650 

Art. no. 251576 

Enclosure for I/O and address units; 

• 788611, 808610, 808613, 808617 and 808630 

Watertight enclosure for I/O and address units; 

• 788611, 808610, 808613, 808617 and 808630 


• 4 x PG 13,5mm cable glands 

Requires art. no. 259546 to complete the enclosure 

Art. no. 259546 Mounting kit for art. no. 251576 

TIMER UNITS 

Art. no. 235685.100 

To be installed in art. no. 251576 to form a complete kit for a watertight solution 

Manual isolating unit 

This unit is used locally to start/stop a predefined time limited function of one or more 

detectors or other equipment via a multifunction (macro) embedded in the Delta OP. 

Art. no. 251373.3 Delta OP multi function input Card 

DOOR RETAINER 

Art. no. 243210 

Interface PCB located in the Delta OP receiving input from the isolating unit art.no 

235685.100. 

DOOR RETAINER: GPT/AG W/BUTTON 

• Holding power: 420 Nm 


• Power rating: 21 – 30 VDC 

• Push button for release 

25 (34)


ALARM UNITS 


Art. no. 243104.01 

Art. no. 243108.01 

Art. no. 243118 

Art. no. 243120 

Art. no. 235312 

Art. no. 251516 

Alarm bell: MBF-6EV 

• Diameter: 150 mm 

• IP rating: 23C 

• Sound output: 98,8 dB(A) 

• Voltage rating: 20,4 – 27,6 VDC 

• High reliability, long life unit. 

Alarm-bell: MBA6-BBX4 



• Sound output: 100,1 dB(A) 

• Voltage rating: 20,4 – 27,6 VDC 

• High reliability, long life unit. 

Beacon XL 

• Red light 

• 5 joule 


• Voltage rating: 20..28 VDC 

• Current consumption: 300mA 

Acoustic alarm 



• Sound output: Based on the chosen 32 tones 

• Voltage rating: 15 – 28VDC 

Sealed base 

To be used for siren art no.: 243120 to obtain IP65 for the alarm unit 

Acoustic alarm 


• Sound output: 105 dB(A) 

26 (34)


ALARM UNITS 


Art. no. 251404 

Art. no. 251517 

Art. no. 251584 

Art. no. 243103.01 

Art. no. 251364 

Art. no. 251424 

Lamp retailing 

• Red light (may also be delivered as orange) 


• 230V 

• Current consumption: 270 mA 

Sounder/strobe 

• 103dBA 

• Red light 

• 30-50mA 

Beacon XL 

• Red light 

• 10 joule 

• 24V 

Alarm buzzer, white 


• Sound output : 90dB/1m 

• Voltage: 24VDC 

Typhoon Air horn 


• IP rating: Watertight 

• Sound output: 115 - 130 dB(A) 

• Air driven 

Typhoon Air horn w/solenoid valve 24VDC 


• IP rating: Watertight 

• Sound output: 115 - 130 dB(A) 

• Air driven 

27 (34)


SOFTWARE 


Art. no. 234676 

FireWin presentation. Network / client one user licence 

FireWin is a marine approved Windows-program that can be set up in the vessels control 

room, bride, communication centre etc. Via this program all the normal functions of the 

Delta OP can be accessed. Graphics of deck plans showing detectors and fire doors etc. 

are fed into the system. This then gives a visual indication of the detector giving an alarm 

signal or those that are non-operative. By means of these indications it is possible to follow 

the course of a fire situation and therefore to give value added information in order for the 

crew onboard to take corrective actions. 


Art. no. 234676.02 FireWin Network / client user licence 

Additional user licence towards the FireWin server 

Art. no. 234676.03 FireWin per. point/address from 1…500 

FireWin programming for systems with less than 500 addresses 

Art. no. 234676.04 FireWin per. point/address from 501…1000 

Additional FireWin programming for systems from 500 addresses and up 1000. 

Art. no. 234676.05 FireWin per. point/address from 1001… 

Additional FireWin programming for systems from 1001 addresses and upwards. 

28 (34)


HARDWARE 


Art. no. 251457 

Art. no. 251458 

Art. no. 251264 

Art. no. 251458 

Workstation 

Art no.: 251457 - Marine approved PC 

Art no.: 251458 - Marine approved LCD 15” monitor 


DELTA MIMIC Panel 

Customized mimic fire alarm panel, price on request based on customers specifications. 

PRINTER 

Art. no. 245031 Paper for printer 

To be connected to the RS232 com port on the Delta OP, used for service and 

commissioning…. 

Paper for printer art. no.: 251458 

Art. no. 30893.3 Cable printer – Delta OP 

Art. no. 235750.006 Cable eNode – PC 

The cable to be used between the printer art. no.: 251458 and the Delta OP’s. 

The cable between the FireWin PC and the eNode. Galvanic isolator is included in the 

cable. 

Cable length: 9 metre 

Art. no. 235750 Cable Laptop – Delta OP 

Cable between a laptop and the Delta OP for hook up locally regarding configurations, 

parameter settings and/or uploading new software version in the Delta system. 

Delta Product Range 29 (34) - Marine


ACCESSORIES 


Art. no. 251454 

Art. no. 704966 

Art. no. 805588 

Art. no. 805589 

Eltek detector programmer 

ELTEK programming hand held tool for setting addresses for the IQ8 / IQ8QUAD 

detectors. The tool is recommended to be kept onboard for easy programming if a detector 

is to be replaced. 

Test key for manual call point 

The test key is to be used for the addressable manual call point art no: 804971 

Dust cover IQ8 

To be fitted on the IQ8 addressable detector range for dust protection 

Dust cover IQ8 QUAD 

To be fitted on the IQ8 QUAD addressable detector range for dust protection 

30 (34)


TEST EQUIPMENT 


Art. no. 251613 

Art. no. 10325 

Art. no. 805580 

Smoke detector test starter kit 

Test gas for smoke detectors 

Eltek detector remover for IQ8 / IQ8QUAD detectors 

Detector removal tool for the IQ8 / IQ8QUAD detector range when height is an issue for 

cleaning or replacing a detector 

31 (34)


DETECTOR LABELS 


Art. no. 259525.01 Labels detector no.01.001-01.126 

Art. no. 259525.02 Labels detector no. 02.001-02.126 










32 (34)

33 (34)

Frode Lundeby: Sales Manager Marine 

� +47 32 24 48 77 

� +47 907 74 178 

� frode.lundeby@honeywell.com 

Gisle Kevin: Area Sales Manager Marine 

� +47 32 24 48 49 

� +47 905 79 130 

� gisle.kevin@honeywell.com 

Kjetil Venås: Project Manager Marine 

� +47 32 24 48 46 

� +47 481 31 526 

� kjetil.venas@honeywell.com 

Customer Support Marine 

� +47 815 44 045 

� nordic.support@honeywell.com 

Honeywell Life Safety AS 

34 (34) 

Honeywell Life Safety 

Company Address: 

Terminalen 16, Lierstranda Ind. 

3400 Lier 

NORWAY 

Postal Address: 

P.O. Box 3514 

3007 Drammen 

NORWAY 

Phone.: +47 32 24 48 00 

Fax. : +47 32 24 48 01 

www.eltek-fs.com 

Lierstranda Industriområde, P.O. Box 3514, 3007 Drammen, Norway Phone: +47 32 24 48 00 

E-mail: fire.safety@honeywell.com Bank Giro Acc.: 6138.06.30140 

Internet: www.eltek-fs.com Registered No: NO 981 336 305 MVA 

Fax: +47 32 24 48 01

Product catalogue – Marine - NET

Create successful ePaper yourself

Delete template?

Save as template?