parallel bar rakes - New Idea - AGCO
parallel bar rakes - New Idea - AGCO parallel bar rakes - New Idea - AGCO
PARALLEL BAR RAKES Rake More Value Into Every Bale. Whether you’re turning damp windrows or pulling swathed hay together ahead of the baler, New Idea 4100 Series parallel bar rakes do it efficiently and effectively. Thanks to the five-bar basket design, you’ll gently lift and turn valuable forage, so each bale retains optimum crude protein and relative feed value. With each pass, you’ll sweep more leaves into every fluffy, uniform windrow and leave nothing behind but clean stubble. In fact, 4100 Series parallel bar rakes incorporate a number of features designed to help you put as much high-yielding crop as possible into every bale. Hydraulic-drive models let you adapt to a wide variety of field conditions; from heavy, wet hay to light, dry straw. Basket speed is independent of travel speed, and speeds range from 80 to 120 rpm at working speeds of up to 10 mph, so you pick the pace. You can even reverse basket direction for gentle tedding or fluffing that speeds drying time – and saves you the expense of additional equipment. The 4100 Series ground-driven models are ideal for use with small tractors without hydraulics. The enclosed, direct-drive, oillubricated gearbox provides positive drive from the ground to the basket, and it easily engages for raking and disengages for transporting between fields. An overrunning clutch in the drive wheel hubs lets wheels travel at different speeds without affecting basket speed, so you get fluffy, even windrows no matter how many times you turn or curve. 4111 Dual Rake Hitch cuts raking time 50%. Save labor and fuel and get your hay out of the field faster, with the 4111 dual rake hitch. On-the-go hydraulic control lets you combine rakes in the pattern that best fits your needs; to generate two windrows simultaneously or convert two windrows into one. And, because the 4111 features hydraulic rear rake positioning, you can negotiate tight corners and narrow gateways with ease. What’s more, you can easily position the rakes for transport – just line up both rakes behind your tractor and use the transport lock bar to secure the rear axle in place.
• A spring-buffered, five-bar basket • Staggered wheels • A raking bar scraper • Simple basket adjustment • Rubber-mounted rake teeth • Sealed, tine bar bearings • Choose from right or left-hand delivery PARALLEL BAR RAKE SPECIFICATIONS MODEL 4150/4151 4160/4161 4170/4171 General Raking width....................8’ 6” (2591 mm) ........9’ 6” (2896 mm) ........9’ 6” (2896 mm) Delivery direction............Left-hand ....................Left-hand ....................Right-hand Drive..................................Ground or ..................Ground or ..................Ground or hydraulic hydraulic hydraulic Teeth Standard......................90..................................100................................100 Optional ......................135................................150................................150 Type ..............................Rubber ........................Rubber ........................Rubber or steel Dimensions Width ................................9’ 8” (2946 mm) ........10’ 10” (3302 mm) ....10’ 10” (3302 mm) Length With clevis....................10’ 10” (3302 mm) ....10’ 10” (3302 mm) ....10’ 10” (3302 mm) With caster ..................13’ 4” (4064 mm) ......13’ 4” (4064 mm) ......13’ 4” (4064 mm) Height ..............................4’ 6” (1372 mm) ........4’ 6” (1372 mm) ........4’ 6” (1372 mm) Tires....................................5.00-15, ......................5.00-15, ........................5.00-15, 4-ply traction 4-ply traction 4-ply traction or rib impl. or rib impl. or rib impl. 4111 DUAL RAKE HITCH SPECIFICATIONS MODEL 4111 Transport Width Model 4111 only..............................................................................7’ 7” ( 2311 mm) With 8’ rakes ....................................................................................9’ 8” (2946 mm) With 9’ rakes ....................................................................................10’ 10” (3302 mm) Weight ..................................................................................................750 lbs. (340 kg) Hydraulics ............................................................................................Double-acting Transport Length (with clevis) Model 4111 only..............................................................................18’ 5” (5613 mm) With 8’ rakes ....................................................................................29’ 3” (8915 mm) With 9’ rakes ....................................................................................29’ 3” (8915 mm) Tires ......................................................................................................6.70-15, 4-ply
- Page 1: Rakes & Tedders Parallel Bar Rakes
- Page 5 and 6: RAKE SPECIFICATIONS The 8-wheel Mod
- Page 7 and 8: Model 4217 Tedder Changeover from o
• A spring-buffered, five-<strong>bar</strong> basket<br />
• Staggered wheels<br />
• A raking <strong>bar</strong> scraper<br />
• Simple basket adjustment<br />
• Rubber-mounted rake teeth<br />
• Sealed, tine <strong>bar</strong> bearings<br />
• Choose from right or left-hand delivery<br />
PARALLEL BAR RAKE SPECIFICATIONS<br />
MODEL 4150/4151 4160/4161 4170/4171<br />
General<br />
Raking width....................8’ 6” (2591 mm) ........9’ 6” (2896 mm) ........9’ 6” (2896 mm)<br />
Delivery direction............Left-hand ....................Left-hand ....................Right-hand<br />
Drive..................................Ground or ..................Ground or ..................Ground or<br />
hydraulic hydraulic hydraulic<br />
Teeth<br />
Standard......................90..................................100................................100<br />
Optional ......................135................................150................................150<br />
Type ..............................Rubber ........................Rubber ........................Rubber<br />
or steel<br />
Dimensions<br />
Width ................................9’ 8” (2946 mm) ........10’ 10” (3302 mm) ....10’ 10” (3302 mm)<br />
Length<br />
With clevis....................10’ 10” (3302 mm) ....10’ 10” (3302 mm) ....10’ 10” (3302 mm)<br />
With caster ..................13’ 4” (4064 mm) ......13’ 4” (4064 mm) ......13’ 4” (4064 mm)<br />
Height ..............................4’ 6” (1372 mm) ........4’ 6” (1372 mm) ........4’ 6” (1372 mm)<br />
Tires....................................5.00-15, ......................5.00-15, ........................5.00-15,<br />
4-ply traction 4-ply traction 4-ply traction<br />
or rib impl. or rib impl. or rib impl.<br />
4111 DUAL RAKE HITCH SPECIFICATIONS<br />
MODEL 4111<br />
Transport Width<br />
Model 4111 only..............................................................................7’ 7” ( 2311 mm)<br />
With 8’ <strong>rakes</strong> ....................................................................................9’ 8” (2946 mm)<br />
With 9’ <strong>rakes</strong> ....................................................................................10’ 10” (3302 mm)<br />
Weight ..................................................................................................750 lbs. (340 kg)<br />
Hydraulics ............................................................................................Double-acting<br />
Transport Length (with clevis)<br />
Model 4111 only..............................................................................18’ 5” (5613 mm)<br />
With 8’ <strong>rakes</strong> ....................................................................................29’ 3” (8915 mm)<br />
With 9’ <strong>rakes</strong> ....................................................................................29’ 3” (8915 mm)<br />
Tires ......................................................................................................6.70-15, 4-ply
Change language