2010 Construction and Material Specifications - Ohio Department of ...
2010 Construction and Material Specifications - Ohio Department of ... 2010 Construction and Material Specifications - Ohio Department of ...
733.02 (3) 2070-3B Front Panel. Ensure that the warranty period begins on the date of shipment to the project. Ensure that each unit has a permanent label or stamp indicating the date of shipment. A. Type TS 2/A1. Furnish a controller unit that meets NEMA TS-2 specifications and is shelf or rack mounted. Ensure that controller settings are programmable through a keyboard on the front panel. Ensure that the front panel contains an 8-line by 40-character display. Furnish materials according to the Department’s Qualified Products List (QPL). B. Type TS-2/A2. Furnish a controller unit that meets NEMA TS-2 specifications and is suitable for shelf mounting. Furnish a controller unit that includes all ports and input/output connectors for complete interchangeability between NEMA TS-1 and TS-2 cabinets. Ensure that controller settings are programmable through a keyboard on the front panel. Ensure that the front panel contains an eight-line by 40-character display. Furnish materials according to the Department’s Qualified Products List (QPL). C. Type 170E. Furnish a controller unit that meets the specifications for “Transportation Electrical Equipment Specifications”, California Department of Transportation, including all addenda. Furnish a controller unit that is listed on the CalTrans QPL and has: 1. Vertically mount all circuit boards. If ribbon cables are used, ensure that they terminate with properly rated and easily repairable connectors on each end. Ensure that ribbon cables do not terminate onto plug-in modules. 2. Furnish a power supply that is modular and easily removable from the chassis. 3. Furnish a unit that contains separate input and output modules. 4. Furnish a controller unit that includes a Model 412C Program Module with the memory configuration for the software either shown on the plans or as provided by the maintaining agency. 5. Socket mount all memory, microprocessor and ACIA devices. Furnish sockets that have machined beryllium copper contacts with gold plating. Furnish materials according to the Department’s Qualified Products List (QPL) D. Types 2070L, 2070LC. Furnish controller units that meet the specifications for “Transportation Electrical Equipment Specifications”, California Department of Transportation, including all addenda. Furnish a controller unit that is listed on the CalTrans QPL. The Type 2070L version controller unit consists of the following assembled modules: Unit Chassis Model 2070-1E CPU Module, Single Board Model 2070-2A 818 Field I/O for 170 Cabinet
733.03 Model 2070-3B Front Panel, Display B (8 lines of 40 characters) Model 2070-4A or Model 2070-4B Power Supply Model 2070-7A Async Serial Communication The Type 2070LC version controller unit consists of the following assembled modules except provide 2070-3B in lieu of Caltrans requirement for a 2070-3C: Unit Chassis Model 2070-1E CPU Module, Single Board Model 2070-2B Field I/O for ITS and TS-2 Cabinet Model 2070-3B Front Panel, Display B (8 lines of 40 characters) Model 2070-4A or Model 2070-4B Power Supply Model 2070-7A Async Serial Communication Also, equip all versions of the Type 2070 controller unit with the following: 1. The appropriate communication port, cables, and connectors for communicating with a laptop computer. 2. Modems, ports, and cables for system communication, if the controller is to operate as part of an interconnected signal system or has a telephone drop shown on the plans. 3. Furnish a serial communication cable to be used to establish periodic automatic time sync between the 2070 controller software and the conflict monitor. The cable shall consist of six feet (2 m) of unshielded 4- conductor cable, minimum 24 gauge stranded conductors with protective jacket. End connectors shall be 9-pin D-subminiature with backshell, male and female, with pin assignments shown in the table below. 9-pin Male 9-pin Female 3 3 5 5 2 2 1 4 8 4 Furnish materials according to the Department’s Qualified Products List (QPL) 733.03 Cabinet. Ensure that all cabinets comply with the requirements of this Section. Equip all NEMA specified cabinets as follows: Supply two through four phase controller operation with a minimum eight position backpanel, configured for two pedestrian movements and two overlaps, with a six channel NEMA TS-1 conflict monitor or NEMA TS-2 malfunction management unit. Supply five through eight phase controller operation with a minimum 12 position backpanel, configured for four pedestrian movements and no overlaps, 819
- Page 773 and 774: Type A: Underdrains and Slope Drain
- Page 775 and 776: 769 712.11 5. A netting weight of a
- Page 777 and 778: 771 712.11 2. Excelsior cut from wo
- Page 779 and 780: 773 721.02 Furnish materials accord
- Page 781 and 782: 775 725.07 725.07 Plastic Pull Boxe
- Page 783 and 784: TABLE 725. 11-3 ANSI WATTS Horizont
- Page 785 and 786: 779 725.11 Ensure that the luminair
- Page 787 and 788: 781 725.15 Ensure that the box and
- Page 789 and 790: 783 725.19 E. Photoelectric Cell. E
- Page 791 and 792: 785 725.21 Luminaires and Traffic S
- Page 793 and 794: 787 725.21 and bears easily found a
- Page 795 and 796: 789 725.21 designed to develop a co
- Page 797 and 798: 730.01 which has been drilled and t
- Page 799 and 800: 793 730.05 730.05 Handhole Covers.
- Page 801 and 802: 795 730.19 730.192 Reflective Sheet
- Page 803 and 804: 797 731.07 60 times per minute with
- Page 805 and 806: Furnish a visor with each signal se
- Page 807 and 808: 801 732.04 percent humidity. Operat
- Page 809 and 810: 803 732.04 q. The module shall be d
- Page 811 and 812: 805 732.04 period of 60 months, ove
- Page 813 and 814: 807 732.05 The LED signal lamp unit
- Page 815 and 816: 809 732.06 Furnish materials accord
- Page 817 and 818: 811 732.08 B. NEMA TS-2. Furnish lo
- Page 819 and 820: 813 732.15 expanding or screw type
- Page 821 and 822: Cable or Wire Number of Conductors
- Page 823: 817 733.02 1. NEMA 8 phase, dual ri
- Page 827 and 828: 821 733.03 hardware and equipment f
- Page 829 and 830: 823 733.03 withstand a peak current
- Page 831 and 832: 825 733.03 l. Terminal Blocks. Furn
- Page 833 and 834: 827 733.03 (7) Furnish loop detecto
- Page 835 and 836: 829 733.03 c. Install red monitor c
- Page 837 and 838: light to display. 831 733.03 (c) En
- Page 839 and 840: 733.03 circuits, yellow timing, mul
- Page 841 and 842: 733.03 (h) MULT IND. Illuminates wh
- Page 843 and 844: 837 733.03 Watchdog Timer, 24VDC, C
- Page 845 and 846: (l) Event logs 839 733.03 (5) Furni
- Page 847 and 848: 733.05 A. Cabinet Riser for NEMA Ca
- Page 849 and 850: 843 733.06 b. Time of day/day of we
- Page 851 and 852: 3. Modem 4. Printer 5. Accessory It
- Page 853 and 854: 847 740.01 Furnish two (2) sets of
- Page 855 and 856: 849 740.03 Minimum Maximum 1. Consi
- Page 857 and 858: H. Color. 851 740.05 Minimum Maximu
- Page 859 and 860: 853 740.08 Allow samples to cure at
- Page 861 and 862: 855 748.00 Roundness (Percent by We
- Page 863 and 864: Pipe Diameter Wall Thickness Wall T
- Page 865 and 866: 859 748.15 or threads. Furnish nozz
- Page 867 and 868: Award, 5, 16 Cancellation of, 16 Of
- Page 869 and 870: Clearances, reinforcing steel, 307
- Page 871 and 872: Control of work, 24 Controller (see
- Page 873 and 874: Retaining walls, 466 Execution of c
733.03<br />
Model 2070-3B Front Panel, Display B (8<br />
lines <strong>of</strong> 40 characters)<br />
Model 2070-4A or Model 2070-4B Power Supply<br />
Model 2070-7A Async Serial Communication<br />
The Type 2070LC version controller unit consists <strong>of</strong> the following assembled<br />
modules except provide 2070-3B in lieu <strong>of</strong> Caltrans requirement for a 2070-3C:<br />
Unit Chassis<br />
Model 2070-1E CPU Module, Single Board<br />
Model 2070-2B Field I/O for ITS <strong>and</strong> TS-2 Cabinet<br />
Model 2070-3B Front Panel, Display B (8<br />
lines <strong>of</strong> 40 characters)<br />
Model 2070-4A or Model 2070-4B Power Supply<br />
Model 2070-7A Async Serial Communication<br />
Also, equip all versions <strong>of</strong> the Type 2070 controller unit with the following:<br />
1. The appropriate communication port, cables, <strong>and</strong> connectors for<br />
communicating with a laptop computer.<br />
2. Modems, ports, <strong>and</strong> cables for system communication, if the controller<br />
is to operate as part <strong>of</strong> an interconnected signal system or has a telephone drop<br />
shown on the plans.<br />
3. Furnish a serial communication cable to be used to establish periodic<br />
automatic time sync between the 2070 controller s<strong>of</strong>tware <strong>and</strong> the conflict<br />
monitor. The cable shall consist <strong>of</strong> six feet (2 m) <strong>of</strong> unshielded 4- conductor<br />
cable, minimum 24 gauge str<strong>and</strong>ed conductors with protective jacket. End<br />
connectors shall be 9-pin D-subminiature with backshell, male <strong>and</strong> female,<br />
with pin assignments shown in the table below.<br />
9-pin Male 9-pin Female<br />
3 3<br />
5 5<br />
2 2<br />
1 4<br />
8 4<br />
Furnish materials according to the <strong>Department</strong>’s Qualified Products List<br />
(QPL)<br />
733.03 Cabinet. Ensure that all cabinets comply with the requirements <strong>of</strong> this<br />
Section. Equip all NEMA specified cabinets as follows:<br />
Supply two through four phase controller operation with a minimum eight<br />
position backpanel, configured for two pedestrian movements <strong>and</strong> two overlaps,<br />
with a six channel NEMA TS-1 conflict monitor or NEMA TS-2 malfunction<br />
management unit.<br />
Supply five through eight phase controller operation with a minimum 12<br />
position backpanel, configured for four pedestrian movements <strong>and</strong> no overlaps,<br />
819