2010 Construction and Material Specifications - Ohio Department of ...

706.02
0.3 mm Crack D-Load 140.0
Ultimate Strength D-Load 175.0
Internal
Diameter Wall
of Pipe
mm
Thickness
mm
Circular Reinforcement
in Circular Pipe
Inner Cage
(cm 2 /m of
pipe)
Outer Cage
(cm 2 /m of pipe)
TABLE 706.02-4M
S-Stirrups
Minimum Area
Per Support
Element
(mm 2 )
710
Number
of Lines [1]
Circumferential Minimum
Longitudinal Spacing on Amplitude
Spacing Inner Cage
(mm) (mm)
[2]
of Stirrups
(mm)
Concrete Strength 41.4 MPa
150 44 1.5 --
200 44 1.5 --
250 44 1.5 --
1350 138 18.2 13.1
1500 150 20.1 14.4
Concrete Strength 34.5 MPa
1350 138 13.5 10.2 19 15 50 54 67
1500 150 14.8 11.2 19 14 50 37 79
1650 163 16.7 12.5 19 13 50 79 92
1800 175 18.4 14.0 19 12 50 92 105
1950 188 19.5 14.6 20 11 50 105 117
2100 200 21.0 15.7 22 11 50 117 130
2250 200 23.9 18.0 26 11 50 117 130
2400 213 25.4 19.1 29 11 50 130 143
2550 213 28.4 21.2 34 11 50 130 143
2700 225 32.0 23.9 41 11 50 143 156
2850 238 32.0 23.9 41 11 50 156 168
3000 250 34.3 25.6 44 11 50 165 181
3150 263 36.6 27.5 46 11 50 175 194
3200 275 38.9 29.2 49 11 50 184 206
3600 300 44.2 33.2 55 11 50 203 232
[1] Refer to Footnote for Table 706.02-2M.
[2] Refer to Footnote for Table 706.02-2M.
11.1 Perform compression tests on cores according to ASTM C 497 (ASTM
C 497M).
11.3 Does not apply.
12 Perform inspection at the project site. Obtain random samples from
material delivered to the project site or at other locations designated by the
Laboratory.
16 Furnish materials from suppliers certified according to Supplement 1074.
17 In addition, after the capital letter “D,” designate the D-load, the design
wall thickness in millimeters (inches expressed as a decimal). Ensure that pipe
with S-stirrups have the symbol “S”. Ensure that pipe requiring axis orientation
without lift holes (i.e., stirrup pipe, quadrant reinforced pipe, elliptically reinforced
pipe) has the centerline of the crown of the pipe marked inside and outside with
the symbol “TB”. Mark pipe with quadrant steel with the symbol “Q”. Mark pipe