2010 Construction and Material Specifications - Ohio Department of ...

700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
740.04 Thermoplastic Verify material is on Approved List maintained If rejecting for performance
Pavement Marking by OMM.
provide 1 qt (1 L) sample and
Accepted with TE-24.
Inspect container for appropriate markings.
Inspect material for uniform consistency.
Document in CMS (Trns.port SiteManager ).
notify District.
740.05 Preformed Pavement Verify material is on Approved List maintained If rejecting for performance
Marking
by OMM.
provide 1 qt (1 L) sample and
Accepted with TE-24.
Inspect container for appropriate markings.
Inspect material for uniform consistency.
Document in CMS (Trns.port SiteManager ).
notify District.
740.06 Work Zone Materials accepted by Engineer.
If rejecting for performance
Pavement Marking Inspect material for uniform consistency. provide 1 qt (1 L) sample and
[Type 1 Removable] Document in CMS (Trns.port SiteManager ). notify District.
[Type 2 Non-
Removable]
740.07 Epoxy Pavement Verify material is on Approved List maintained If rejecting for performance
Marking Material by OMM.
provide 1 qt (1 L) sample and
Accepted with TE-24.
Inspect container for appropriate markings.
Inspect material for uniform consistency.
Document in CMS (Trns.port SiteManager ).
notify District
740.08 Heat-Fused Verify material is on Approved List maintained If rejecting for performance
Preformed Plastic by OMM.
provide 1 qt (1 L) sample and
Pavement Marking Accepted with TE-24.
notify District
Material
Inspect container for appropriate markings.
Inspect material for uniform consistency.
Document in CMS (Trns.port SiteManager ).
740.09 A Glass Beads – for Accepted with TE-24.
Accept if accompanied by a TE-24
740.02
Inspect container for appropriate markings.
Inspect material for uniform consistency.
Document in CMS (Trns.port SiteManager ).
740.09 B Glass Beads – for Accepted with TE-24.
Accept if accompanied by a TE-24
740.03
Inspect container for appropriate markings.
Inspect material for uniform consistency.
Document in CMS (Trns.port SiteManager ).
740.09 C Glass Beads – for Accepted with TE-24.
Accept if accompanied by a TE-24
740.04
Inspect container for appropriate markings.
Inspect material for uniform consistency.
Document in CMS (Trns.port SiteManager ).
740.09 D Glass Beads – for Verify material is on Approved List maintained Accept if accompanied by a TE-24
740.07
by OMM.
Accepted with TE-24.
Inspect container for appropriate markings.
Inspect material for uniform consistency.
Document in CMS (Trns.port SiteManager ).
748.01 Ductile Iron Pipe, Verify type and brand name of material is on Notify District Testing if rejecting
Joints, and Fittings QPL at the time of use.
material.
Inspect for condition, dimension, suitability for If material non-performs or looks
intended use.
defective during use notify District
Document in CMS (Trns.port SiteManager ). Testing and OMM.
748.02 Polyvinyl Chloride Verify type and brand name of material is on Notify District Testing if rejecting
(PVC) Pipe, Joints, QPL at the time of use.
material.
and Fittings Inspect for condition, dimension, suitability for If material non-performs or looks
intended use.
defective during use notify District
Document in CMS (Trns.port SiteManager ). Testing and OMM.
748.03 Polyethylene (PE) Verify type and brand name of material is on Notify District Testing if rejecting
Service Branches QPL at the time of use.
material.
and Fittings Inspect for condition, dimension, suitability for If material non-performs or looks
intended use.
defective during use notify District
Document in CMS (Trns.port SiteManager ). Testing and OMM.
656