05.01.2013 Views

2010 Construction and Material Specifications - Ohio Department of ...

2010 Construction and Material Specifications - Ohio Department of ...

2010 Construction and Material Specifications - Ohio Department of ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

647<br />

700.00<br />

Spec No. <strong>Material</strong> <strong>Material</strong> only Inspection or Sampling<br />

Requirements<br />

Post Inspection Instructions<br />

712.01 Expansion Shield Verify type <strong>and</strong> br<strong>and</strong> name <strong>of</strong> material is on Notify District Testing <strong>and</strong> OMM,<br />

Anchors<br />

QPL at the time <strong>of</strong> use.<br />

structural welding <strong>and</strong> metals<br />

Inspect for condition <strong>and</strong> defect.<br />

section, if rejecting material<br />

Verify dimension conform to plan<br />

because material non-performs or<br />

requirements.<br />

looks defective during use. Obtain<br />

Document in CMS (Trns.port SiteManager ). three(3) samples representative <strong>of</strong><br />

defect to OMM for QA follow-up.<br />

712.02 Calcium Chloride Verify type <strong>and</strong> br<strong>and</strong> name <strong>of</strong> material is on Notify District Testing if rejecting<br />

QPL at the time <strong>of</strong> use.<br />

material.<br />

Inspect for condition <strong>and</strong> defect.<br />

If material non-performs or looks<br />

Verify dimension conform to plan<br />

defective during use contact<br />

requirements.<br />

Document in CMS (Trns.port SiteManager ).<br />

OMM.<br />

712.03 Sodium Chloride Inspect material for condition.<br />

If additional samples required for<br />

Submit one (1) pint sample per Each Purchase material quantities exceeding 3000<br />

Order to OMM.<br />

Document in CMS (Trns.port SiteManager ).<br />

tons, Notify District Testing.<br />

712.04 A Lime [masonry] Sample & Inspect material for condition with Notify District Testing if rejecting<br />

24 hrs <strong>of</strong> receipt.<br />

One (1) five (5) lb sample.<br />

Document in CMS (Trns.port SiteManager ).<br />

material.<br />

712.04 B Lime [Quick] for Assure provided material is from suppliers Notify District Testing if rejecting<br />

Stabilization certified under Supplement 1087 <strong>and</strong> material.<br />

documentation for m S1087 is complete. Samples may be taken in triplicate,<br />

Document in CMS (Trns.port SiteManager ). if required. Contact Geotechnical<br />

If questions on material quality sample.<br />

One (1) ten (10) lb sample <strong>of</strong> Quicklime. Send<br />

to Geotechnical Engineering.<br />

Engineering.<br />

712.04 C Lime Kiln Dust for Assure provided material is from suppliers Notify District Testing if rejecting<br />

Stabilization certified under Supplement 1087 <strong>and</strong> material.<br />

documentation for m S1087 is complete. Samples may be taken in triplicate,<br />

Document in CMS (Trns.port SiteManager ). if required. Contact Geotechnical<br />

If questions on material quality sample.<br />

One (1) ten (10) lb sample <strong>of</strong> Lime Kiln Dust.<br />

Send to Geotechnical Engineering<br />

Engineering.<br />

712.06 Preservative Component material <strong>of</strong> pressure treated lumber. If questions on pressure treated<br />

Treatment for No approval required.<br />

lumber check the specific material<br />

Structural Timber<br />

item <strong>and</strong> follow those instructions<br />

712.09 Geotextile Fabrics Verify type <strong>and</strong> br<strong>and</strong> name <strong>of</strong> material is on Notify District Testing if rejecting<br />

QPL at the time <strong>of</strong> use.<br />

material.<br />

Inspect for condition <strong>and</strong> defect.<br />

If material non-performs or looks<br />

Verify dimension conform to plan<br />

defective during use submit one<br />

requirements.<br />

(1) 4' x 4' sample representative <strong>of</strong><br />

Document in CMS (Trns.port SiteManager ). defect to OMM.<br />

712.10 Prefabricated Edge Inspect material for condition <strong>and</strong> dimension. Notify District Testing if rejecting<br />

Underdrain Manufacturer’s certified test data required for<br />

acceptance.<br />

Document in CMS (Trns.port SiteManager ).<br />

material.<br />

712.11 Temporary Erosion Inspect material for condition <strong>and</strong> dimension. Notify District Testing if rejecting<br />

Control Mats Manufacturer’s certified test data required for material.<br />

<strong>Material</strong><br />

acceptance.<br />

[Types A through I] Field Acceptance item<br />

Refer to Temporary <strong>Material</strong>s Policy for<br />

documentation requirements.<br />

720.01 Rectangular Verify type <strong>and</strong> br<strong>and</strong> name <strong>of</strong> material is on Notify District Testing <strong>and</strong> OMM<br />

Reflectors QPL at the time <strong>of</strong> use.<br />

Chemical section, if rejecting<br />

Inspect for condition, color requirements <strong>and</strong> material because material non-<br />

defect.<br />

performs or looks defective during<br />

Verify dimension conform to plan<br />

requirements.<br />

Document in CMS (Trns.port SiteManager ).<br />

use.<br />

720.03 Flexible Delineator Verify type <strong>and</strong> br<strong>and</strong> name <strong>of</strong> material is on Notify District Testing <strong>and</strong> OMM<br />

Posts<br />

QPL at the time <strong>of</strong> use.<br />

Chemical section, if rejecting<br />

Inspect for condition <strong>and</strong> defect.<br />

material because material non-<br />

Verify dimension conform to plan<br />

performs or looks defective during<br />

requirements.<br />

Document in CMS (Trns.port SiteManager ).<br />

use.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!