2010 Construction and Material Specifications - Ohio Department of ...

700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
711.21 Preformed Bearing Verify type and brand name of material is on If material non-performs or looks
Pads
QPL at the time of use.
defective during use notify District
Inspect for condition and defect.
Verify dimension conform to plan
requirements.
Document in CMS (Trns.port SiteManager ).
Testing and OMM.
711.23 Elastomeric Only accept elastomeric bearings shipped by Field acceptable for durometer.
Bearings
TE-24.and provided by certified suppliers Reading average range: +/- 7
conforming to S1081. Notify district testing.
to Inspect material to check location and
number of internal shims utilizing an ice pick
or similar tool.
Five (5) Durometer Gage readings should be
taken and averaged to determine compliance
with design plans.
Document in CMS (Trns.port SiteManager ).
points of design plan number.
711.24 Waterproofing fabric Verify type and brand name of material is on Notify District Testing if rejecting
QPL at the time of use.
Inspect for condition and defect.
Verify dimension conform to plan
requirements.
Document in CMS (Trns.port SiteManager ).
material.
711.25 Type 2 Membrane Verify type and brand name of material is on Notify District Testing if rejecting
Waterproofing QPL at the time of use.
material.
Inspect for condition and defect.
If material non-performs or looks
Verify dimension conform to plan
defective during use send one (1) 4
requirements.
ft
Document in CMS (Trns.port SiteManager ).
2 sample representative of defect
to OMM for QA follow-up.
711.26 Structural Timber, Products will be supplied by a source on the Notify District Testing and OMM,
Lumber and Piling Certified List for S-1072 maintained by OMM. structural welding and metals
Received with TE-24 and supplier bill of section, if rejecting material
lading.
because material non-performs or
Check dimension, quantity and condition.
Document in CMS (Trns.port SiteManager ).
looks defective during use.
711.27 Prestressing Steel Material supplied by a Fabricator source on the If questions concerning prstressed
Certified List for Items 515 maintained by
OMM.
Prestressed Concrete Members are received
with TE-24.
concrete or prestressed
711.28 Cellular Polyvinyl Verify type and brand name of material is on Notify District Testing if rejecting
Chloride Sponge QPL at the time of use.
material.
Inspect for condition and defect.
If material non-performs or looks
Verify dimension conform to plan
defective during use send
requirements.
one (1) 1.5'x2.5' sample
Document in CMS (Trns.port SiteManager ). representative of defect to OMM
for QA follow-up.
711.29 Type 3 Membrane Verify type and brand name of material is on Notify District Testing if rejecting
Waterproofing QPL at the time of use.
material.
Membrane primer is 705.04 material If material non-performs or looks
Inspect for condition and defect.
defective during use send
Verify dimension conform to plan
one (1) 4 square ft sample
requirements.
representative of defect to OMM
Document in CMS (Trns.port SiteManager ). for QA follow-up.
711.30 Aluminum for Steps Verify type and brand name of material is on Notify District Testing and OMM,
QPL at the time of use.
structural welding and metals
Inspect for condition and defect.
section, if rejecting material
Verify dimension conform to plan
because material non-performs or
requirements.
Document in CMS (Trns.port SiteManager ).
looks defective during use.
711.31 Reinforced Verify type and brand name of material is on Notify District Testing and OMM,
Propylene Plastic QPL at the time of use.
structural welding and metals
Manhole Steps Inspect for condition and defect.
section, if rejecting material
Verify dimension conform to plan
because material non-performs or
requirements.
Document in CMS (Trns.port SiteManager ).
looks defective during use.
646