2010 Construction and Material Specifications - Ohio Department of ...

643
700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
709.05 Axle Steel Products will be supplied by a source on the Notify District Testing and OMM,
Deformed and Plain Certified List for S-1068 maintained by OMM. structural welding and metals
Bars for Concrete Received with TE-24.
section, if rejecting material
Reinforcement Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
three (3) 30" (.8 m) long samples
of each rebar size, with markings,
and submit for QA testing by the
Laboratory.
709.08 Cold-Drawn Steel Products will be supplied by a source on the Notify District Testing and OMM,
Wire for Concrete Certified List for S-1068 maintained by OMM. structural welding and metals
Reinforcement Received with TE-24.
section, if rejecting material
Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
three (3) 30" (.8 m) long samples
of each diameter and submit for
QA testing by the Laboratory.
709.09 Fabricated Steel Bar Products will be supplied by a source on the Notify District Testing and OMM,
or Rod Mats for Certified List for S-1068 maintained by OMM. structural welding and metals
Concrete
Received with TE-24.
section, if rejecting material
Reinforcement Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
3 ft x 3 ft (1 m x 1 m) of the mat
and submit for QA testing by the
Laboratory.
709.10 Welded Steel Wire Products will be supplied by a source on the Notify District Testing and OMM,
Fabric for Concrete Certified List for S-1068 maintained by OMM. structural welding and metals
Reinforcement Received with TE-24.
section, if rejecting material
Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
3 ft x 3 ft (1 m x 1 m) of the mat
and submit for QA testing by the
Laboratory.
709.11 Deformed Steel Products will be supplied by a source on the Notify District Testing and OMM,
Wire for Concrete Certified List for S-1068 maintained by OMM. structural welding and metals
Reinforcement Received with TE-24.
section, if rejecting material
Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
3 ft x 3 ft (1 m x 1 m) of the mat
and submit for QA testing by the
Laboratory.
709.12 Welded Deformed Products will be supplied by a source on the Notify District Testing and OMM,
Steel Wire Fabric for Certified List for S-1068 maintained by OMM. structural welding and metals
Concrete
Received with TE-24.
section, if rejecting material
Reinforcement Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
3 ft x 3 ft (1 m x 1 m) of the mat
and submit for QA testing by the
Laboratory.
709.13 Coated Dowel Bars Products will be supplied by a source on the Notify District Testing and OMM,
Certified List for S-1068 maintained by OMM. structural welding and metals
Received with TE-24.
section, if rejecting material
Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
3 dowel bars and submit for QA
testing by the Laboratory.
709.14 Epoxy-Coated Steel Products will be supplied by a source on the Notify District Testing and OMM,
Wire and Welded Certified List for S-1068 maintained by OMM. structural welding and metals
Wire Fabric for Received with TE-24.
section, if rejecting material
Reinforcement Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
3 ft x 3 ft (1 m x 1 m) of the mat
and submit for QA testing by the
Laboratory.
709.15 Plastic Supports for Products will be supplied by a source on the Notify District Testing if rejecting
Reinforcing Steel Approved List maintained by OMM. material that non-performs or
Inspect for dimension and condition. looks defective during use.