2010 Construction and Material Specifications - Ohio Department of ...

700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
707.47 ABS and Polyvinyl If material is shipped with TE24, accept based Notify District Testing if rejecting
Chloride Composite on inspection of material for type, condition material.
Pipe
and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )
707.51 ABS Drain Waste If material is shipped with TE24, accept based Notify District Testing if rejecting
and Vent Pipe on inspection of material for type, condition
and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )
material.
707.52 ABS Sewer Pipe If material is shipped with TE24, accept based Notify District Testing if rejecting
on inspection of material for type, condition
and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )
material.
707.70 Welded and Verify type and brand name of material is on Notify District Testing and OMM,
Seamless Steel Pipe QPL at the time of use.
structural metals and Welding
Document in CMS (Trns.port SiteManager ). section, if rejecting material
because material non-performs or
looks defective during use.
708.01 Inorganic Zinc Products will be supplied by a source on the Notify District Testing and OMM,
Silicate Primer Paint Certified List for S-1084 maintained by OMM. chemical section, if rejecting
Verify type and brand name of material is on material because material non-
QPL at the time of use.
performs or looks defective during
Inspect material container for markings, use. Obtain a 1 qt (1 L) sample
expiration date and condition.
Document in CMS (Trns.port SiteManager ).
representative of the defects.
708.02 OZEU Structural Products will be supplied by a source on the Notify District Testing and OMM,
708.02B Steel Pant Certified List for S-1084 maintained by OMM. chemical section, if rejecting
708.02C Organic Zinc Prime Verify type and brand name of material is on material because material non-
708.02D Coat
QPL at the time of use.
performs or looks defective during
Epoxy Intermediate Inspect material container for markings, use. Obtain a 1 qt (1 L) sample
Coat
expiration date and condition.
representative of the defects.
Urethane Finish
Coat
Document in CMS (Trns.port SiteManager ).
709.01 Deformed and Plain Products will be supplied by a source on the Notify District Testing and OMM,
Billet Steel Bars for Certified List for S-1068 maintained by OMM. structural welding and metals
Concrete
Received with TE-24.
section, if rejecting material
Reinforcement Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
three (3) 30" (.8 m) long samples
of each rebar size, with markings,
and submit for QA testing by the
Laboratory.
709.03 Rail Steel Deformed Products will be supplied by a source on the Notify District Testing and OMM,
and Plain Bars for Certified List for S-1068 maintained by OMM. structural welding and metals
Concrete
Received with TE-24.
section, if rejecting material
Reinforcement Check dimension, markings and condition. because material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use. Obtain
three (3) 30" (.8 m) long samples
of each rebar size, with markings,
and submit for QA testing by the
Laboratory.
642