2010 Construction and Material Specifications - Ohio Department of ...

641
700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
707.31 Polyethylene Products will be supplied by a source on the Notify District Testing and OMM,
707.32 Corrugated Pipe Certified List for S-1066 maintained by OMM. asphalt section, if rejecting
707.33
Received with TE-24.
material because material non-
Check dimension and markings.
performs or looks defective during
Document in CMS (Trns.port SiteManager
).
use.
707.41 Polyvinyl Chloride If material is shipped with TE24, accept based Notify District Testing if rejecting
Plastic Pipe on inspection of material for type, condition
and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )
material.
707.42 Polyvinyl Chloride If material is shipped with TE24, accept based Notify District Testing if rejecting
Corrugated Smooth on inspection of material for type, condition material.
Interior Pipe and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )
707.43 Polyvinyl Chloride If material is shipped with TE24, accept based Notify District Testing if rejecting
Profile Wall Pipe on inspection of material for type, condition
and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )
material.
707.44 Polyvinyl Chloride If material is shipped with TE24, accept based Notify District Testing if rejecting
Sanitary Pipe on inspection of material for type, condition
and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )
material.
707.45 Polyvinyl Chloride If material is shipped with TE24, accept based Notify District Testing if rejecting
Solid Wall Pipe on inspection of material for type, condition
and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )
material.
707.46 Polyvinyl Chloride If material is shipped with TE24, accept based Notify District Testing if rejecting
Drain Waste and on inspection of material for type, condition material.
Vent Pipe and dimension.
Document in CMS (Trns.port SiteManager ).
If no TE24, accept based on inspection of
material for type, condition, dimension, receipt
and verification of manufacturer’s certified test
data.
Document in CMS (Trns.port SiteManager )