2010 Construction and Material Specifications - Ohio Department of ...

637
700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
705.10 Air Entraining Verify type and brand name of material listed Storage: Admixtures should be
Admixtures on Concrete Plant Batch Ticket is on QPL at stored at concrete producer in such
the time of use.
a manner to permit easy access for
Document in CMS (Trns.port SiteManager ). proper identification in weather
resistant units.
Provide minimum QA sample of
one (1) every 180 days per
concrete plant, each material, each
company. Minimum sample size
one (1) quart
705.11 Joint Sealer Verify type and brand name of material is on Notify District Testing if rejecting
Preformed QPL at the time of use.
material because material non-
Elastomeric Inspect for condition, appearance, dimension performs or looks defective during
and manufacturer trademark.
Document in CMS (Trns.port SiteManager ).
use.
705.12 Chemical
Verify type and brand name of material is on Storage: Admixtures should be
Admixtures for QPL at the time of use.
stored at concrete producer in such
Concrete
Document in CMS (Trns.port SiteManager ). a manner to permit easy access for
proper identification in weather
resistant units.
Provide minimum QA sample of
one (1) every 180 days per
concrete plant, each material, each
company. Minimum sample size
one (1) quart.
705.15 High Molecular Verify type and brand name of material is on
Weight Methacrylate QPL at the time of use.
(HMWM) Document in CMS (Trns.port SiteManager ).
705.20 Non Shrink, Non
Metallic Grout
705.21 Quick Setting
Concrete Mortar
Verify type and brand name of material is on Notify District Testing if rejecting
QPL at the time of use. Ensure mixing is material.
performed in accordance with manufacturer’s If material non-performs or looks
recommendations on the container.
defective during use notify District
Document in CMS (Trns.port SiteManager ). Testing and OMM for sampling
requirements.
Verify type and brand name of material is on Notify District Testing if rejecting
QPL at the time of use. Ensure mixing is material.
performed in accordance with manufacturer’s If material non-performs or looks
recommendations on the container.
defective during use notify District
Document in CMS (Trns.port SiteManager ). Testing and OMM for sampling
requirements.
705.22 Non-shrink Mortar Verify manufacturer is on the Approved List Sample will be tested at 3, 7 and
maintained by OMM. Ensure mixing is 28 days.
performed in accordance with manufacturer’s Do not open structure to traffic
recommendations on the container. Make three until a compressive strength of
(3) or more 3"x6" cylinders from keyway mix.
Ship to OMM Concrete Section.
Document in CMS (Trns.port SiteManager ).
5000 psi (34.5 MPa) is achieved.
705.23 A Epoxy-urethane
Sealers
Verify type and brand name of material is on Notify District Testing if rejecting
QPL at the time of use.
material.
Ensure mixing is performed in accordance with If material non-performs or looks
manufacturer’s recommendations on the defective during use obtain 1 qt (1
container.
L) samples in a sealed container
Document in CMS (Trns.port SiteManager ). and send to OMM.
705.23 B Non Epoxy Sealers Verify type and brand name of material is on Notify District Testing if rejecting
QPL at the time of use.
material.
Ensure mixing is performed in accordance with If material non-performs or looks
manufacturer’s recommendations on the defective during use obtain 1 qt (1
container.
L) samples in a sealed container
Document in CMS (Trns.port SiteManager ). and send to OMM.
705.24 Soluble Reactive
Silicate
Verify type and brand name of material is on Notify District Testing if rejecting
QPL at the time of use.
material.
Ensure mixing is performed in accordance with
manufacturer’s recommendations on the
container.
Document in CMS (Trns.port SiteManager ).