2010 Construction and Material Specifications - Ohio Department of ...

700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
703.18 Aggregate for Items Products will be supplied by a supplier on the No additional project sampling
410, 411, and Pre-Qualified Supplier List for S 1069 required for approved, sampled
617from Non- maintained by OMM.
tonnage except if project believes
Certified Stock 90 to 100 lb. QC sample taken from each 5200 there is a problem with the
ton (4720 metric ton) stockpile, submitted to material [either gradation or
OMM Aggregate Section.
Document in CMS (Trns.port SiteManager
)..
Do not use until tested and approved.
quality]
703.19.A Crushed Aggregate Products will be supplied by a supplier on the No sampling required except if
Slope Protection and Pre-Qualified Supplier List for S 1069 project believes there is a problem
Filter Aggregate for maintained by OMM.
with the material [either gradation
Dump Rock Fill Document in CMS (Trns.port SiteManager ). or quality]
703.19.B Dumped Rock Fill
and Rock Channel
Protection
704.01
704.02
704.03
Block:
Brick
Concrete Masonry
Shale
705.01 Fiber Reinforced
Polymer (FRP)
Dowel Bars
705.03 Joint Filler
Preformed
705.04 Joint and Crack
Sealer
Hot Applied
705.05 Burlap Cloth
Materials
705.06 Sheet Curing
Materials
705.07 Concrete Curing
Compounds
Products will be supplied by a supplier on the
Pre-Qualified Supplier List for S 1069
maintained by OMM.
Confirm with OMM laboratory source has
know durability history
Sample on direction of the OMM laboratory
Document in CMS (Trns.port SiteManager ).
636
No sampling required except if
project believes there is a problem
with the material [either gradation
or quality]
Verify type of material is on QPL at the time of Notify District Testing if rejecting
use.
material.
Inspect for condition and defects.
When material non-performs or
Document in CMS (Trns.port SiteManager ). looks defective during use reject
material and sample 12 brick
representative of defect to OMM
for QA follow-up.
Certified test data from an accredited testing
facility will accompany each shipment.
Document in CMS (Trns.port SiteManager ).
Notify District Testing upon
receipt of shipment.
Verify type and brand name of material is on Notify District Testing if rejecting
QPL at the time of use.
material.
Inspect for condition, appearance and If material non-performs or looks
dimension.
defective during use send one (1)
Document in CMS (Trns.port SiteManager ). 1.5'x2.5' sample representative of
defect to OMM for QA follow-up.
Material is pre-tested and approved.
Notify District Testing if rejecting
Will be shipped with TE-24.
material.
Document in CMS (Trns.port SiteManager ). If material non-performs or looks
defective during use notify District
Testing and OMM Asphalt Section
for sampling requirements.
Inspect for condition, appearance and
dimension.
Documenting in CMS (Trns.port SiteManager
) .is not required
Only sample if there if questioning material
meet specification
Inspect for condition, appearance and
dimension.
Documenting in CMS (Trns.port SiteManager
) is not required.
Only sample if there if questioning material
meet specification
Notify District Testing if rejecting
material.
If material non-performs or looks
defective during use notify District
Testing and OMM.
Notify District Testing if rejecting
material.
If material non-performs or looks
defective during use notify District
Testing and OMM.
Verify type and brand name of material is on Notify District Testing if rejecting
QPL at the time of use.
material.
Inspect for condition and appearance. If material non-performs or looks
Document in CMS (Trns.port SiteManager ). defective during use send one (1)
quart sample representative of
defect to OMM, Cement and
Concrete section, for QA followup.