2010 Construction and Material Specifications - Ohio Department of ...

635
700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
703.11 Type Structural Backfill Assure materials provided by a supplier on the 60 to 70 lb. QC sample taken by
3
for 603 Bedding and Pre-Qualified Supplier List for S 1069 District lab at source a minimum
Backfill from maintained by OMM.
four (4) times per year.
Certified Stock Document in CMS (Trns.port SiteManager ). No project sampling required
except if project believes there is a
problem with the material [either
gradation or quality]
703.11 Type Structural Backfill Assure materials provided by a supplier on the No additional project sampling
3
for 603 Bedding and Pre-Qualified Supplier List for S 1069 required for approved, sampled
Backfill from Non- maintained by OMM.
tonnage except if project believes
Certified Stock 60 to 70 lb. QC sample taken from each 5200 there is a problem with the
ton (4720 metric ton) stockpile, submitted to material [either gradation or
OMM Aggregate Section.
Document in CMS (Trns.port SiteManager ).
Do not use until tested and approved.
quality]
703.13 Coarse Aggregate
for Items 451 and
452
703.14 Steel Slag Aggregate
for Non-Pavement
Use
703.16 Suitable Materials
for Embankment
Construction
Modification
required for
703.16
703.17 Dense Graded
Aggregate for Item
304 from Certified
Stock
703.17 Dense Graded
Aggregate for Item
304 from Non-
Certified Stock
703.18 Aggregate for Items
410, 411, and
617from Certified
Stock
Assure materials provided by a supplier on the No project sampling required
Pre-Qualified Supplier List for S 1069 except if project believes there is a
maintained by OMM.
problem with the material [either
Assure materials are on the OMM Freeze Thaw gradation or quality]
List
Follow requirements of coarse aggregate
703.02
Document in CMS (Trns.port SiteManager ).
Assure materials from a supplier on the Pre-
Qualified Supplier List for S 1069 maintained
by OMM.
Stockpile and sample each 2500 tons (2300
metric tons). Notify the District laboratory for
inspection of sources and to obtain split
samples. Test for expansion
Multiple materials listed. Follow the
requirements of the individual material
specification
No additional project sampling
required for approved, sampled
tonnage except if project believes
there is a problem with the
material [either gradation or
quality]
Follow the requirements of the
individual material specification
Products will be supplied by a supplier on the 90 to 100 lb. QC sample taken by
Pre-Qualified Supplier List for S 1069 District lab at source a minimum
maintained by OMM.
four (2) times per year.
Document in CMS (Trns.port SiteManager ). No project sampling required
except if project believes there is a
problem with the material [either
gradation or quality]
Products will be supplied by a supplier on the No additional project sampling
Pre-Qualified Supplier List for S 1069 required for approved, sampled
maintained by OMM.
tonnage except if project believes
90 to 100 lb. QC sample taken from each 5200 there is a problem with the
ton (4720 metric ton) stockpile, submitted to material [either gradation or
OMM Aggregate Section.
Document in CMS (Trns.port SiteManager ).
Do not use until tested and approved.
quality]
Products will be supplied by a supplier on the 90 to 100 lb. QC sample taken by
Pre-Qualified Supplier List for S 1069 District lab at source a minimum
maintained by OMM.
four (4) times per year.
Document in CMS (Trns.port SiteManager ). No project sampling required
except if project believes there is a
problem with the material [either
gradation or quality]