2010 Construction and Material Specifications - Ohio Department of ...

700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
703.02 Fine Aggregate from Fine Aggregate will be supplied by a supplier No additional project sampling
703.03 Non-Certified Stock on the Pre-Qualified Supplier List for S 1069 required for approved, sampled
703.04
maintained by OMM.
tonnage except if project believes
703.05
30 to 40 lb. QC sample taken from each 1800 there is a problem with the
703.06
ton (1640 metric ton) stockpile, submitted to material [either gradation or
703.10
OMM Aggregate Section.
Document in CMS (Trns.port SiteManager ).
Do not use until tested and approved.
quality]
703.02
703.04
703.05
703.02
703.04
703.05
Dense Graded
Aggregate from
Certified Stock
Dense Graded
Aggregate from
Non-Certified Stock
703.07 Materials Mineral
filler
703.11
Type 1
703.11
Type 1
703.11
Type 2
703.11
Type2
Structural Backfill
for 603 Bedding and
Backfill from
Certified Stock
Structural Backfill
for 603 Bedding and
Backfill from Non-
Certified Stock
Structural Backfill
for 603 Bedding and
Backfill from
Certified Stock
Structural Backfill
for 603 Bedding and
Backfill from Non-
Certified Stock
Dense Graded Aggregate will be supplied by a 90 to 100 lb. QC sample taken by
supplier on the Pre-Qualified Supplier List for District lab at source a minimum
S 1069 maintained by OMM.
four (4) times per year.
Document in CMS (Trns.port SiteManager ). No project sampling required
except if project believes there is a
problem with the material [either
gradation or quality]
Dense Graded Aggregate will be supplied by a
supplier on the Pre-Qualified Supplier List for
S 1069 maintained by OMM.
90 to 100 lb. QC sample taken from each 5200
ton (4720 metric ton) stockpile, submitted to
OMM Aggregate Section.
Document in CMS (Trns.port SiteManager ).
Do not use until tested and approved.
For limestone dust assure from a source on
Certified List for S 1069.
For Portland cement assure source is on
Certified list for S 1028
For inert mineral filler sample for gradation.
Submit to District Lab.
Assure materials provided by a supplier on the
Pre-Qualified Supplier List for S 1069
maintained by OMM.
Document in CMS (Trns.port SiteManager ).
Assure materials provided by a supplier on the
Pre-Qualified Supplier List for S 1069
maintained by OMM.
90 to 100 lb. QC sample taken from each 5200
ton (4720 metric ton) stockpile, submitted to
OMM Aggregate Section.
Document in CMS (Trns.port SiteManager ).
Do not use until tested and approved.
Assure materials provided by a supplier on the
Pre-Qualified Supplier List for S 1069
maintained by OMM.
Document in CMS (Trns.port SiteManager ).
Assure materials provided by a supplier on the
Pre-Qualified Supplier List for S 1069
maintained by OMM.
90 to 100 lb. QC sample taken from 5200 ton
(4720 metric ton) stockpile, submitted to OMM
Aggregate Section.
Document in CMS (Trns.port SiteManager ).
Do not use until tested and approved.
634
No additional project sampling
required for approved, sampled
tonnage except if project believes
there is a problem with the
material [either gradation or
quality]
90 to 100 lb. QC sample taken by
District lab at source a minimum
four (4) times per year.
No project sampling required
except if project believes there is a
problem with the material [either
gradation or quality]
No additional project sampling
required for approved, sampled
tonnage except if project believes
there is a problem with the
material [either gradation or
quality]
90 to 100 lb. QC sample taken by
District lab at source a minimum
four (4) times per year.
No project sampling required
except if project believes there is a
problem with the material [either
gradation or quality]
No additional project sampling
required for approved, sampled
tonnage except if project believes
there is a problem with the
material [either gradation or
quality]