2010 Construction and Material Specifications - Ohio Department of ...

633
700.00
Spec No. Material Material only Inspection or Sampling
Requirements
Post Inspection Instructions
701.13 Fly Ash Verify manufacturer on Concrete Plant Batch Obtain one ½ gallon sample and
Ticket is on Certified List for S 1026 original bill-of-lading per concrete
maintained by OMM.
plant every 180 days for QA. Ship
Verify material against bill of lading sample to OMM laboratory.
description
Ensure that sample container is
Document in CMS (Trns.port SiteManager ). filled to capacity prior to transport.
If high LOI fly ash verify manufacturer on
Concrete Plant Batch Ticket is on List for S
1115.
702.01 Asphalt Binder Certified asphalt PG binder: As directed by Certified binder: Plant: Submit
the Lab.
Plant: Minimum of one sample per project per
sample to Lab.
season, except for inconsequential quantities. Non-certified binder: Submit to
Lab. Do not allow asphalt
Non-Certified PG binder: Will be sampled and production until material is
approved by the Department before use. approved.
702.02 Cut Back Asphalt Certified material:
Certified material: Submit to Lab.
702.03 Cut Back Asphalt At the refinery or source as directed by the Lab.
702.04 Emulsions Project and/ or Plant: Min. one sample per each Non-certified material: Submit to
702.07 Emulsified Asphalts 25,000 gallons. None for less than 300 gallons. Lab. Do not use until approved by
702.13 Asphalt Emulsion
Lab.
MWS
Non-certified material: Will be sampled and
Rubberized Asphalt
Emulsion
approved by the Department before use.
702.05 Asphalt Primer Each batch sampled and pre-approved per TE Project: Do not accept on project
702.06 Waterproofing
Asphalt
Waterproofing
24. Lab contacted by supplier for test. without TE 24.
702.14 Rubber Compound Certified test data
702.16 Polymer Emulsified Certified test data
Binder
702.17 Crack Sealant Material is pre-tested and approved.
Notify District Testing if rejecting
Will be shipped with TE-24.
material.
Document in CMS (Trns.port SiteManager ). If material non-performs or looks
defective during use Notify
District Testing and OMM Asphalt
Section.
703.02 Coarse Aggregate Coarse Aggregate will be supplied by a Pre- 60 to 75 lb. QC sample taken by
703.04 from Certified Stock Qualified producer/supplier (S1069). Verify District lab at source a minimum
703.05
the producer/supplier is Pre-Qualified using the four (4) times per year.
703.08
Pre-Qualified Producer/Supplier list maintained No project sampling required
by OMM (website).
except if project believes there is a
Document in CMS.
problem with the material [either
gradation or quality]
703.02 Coarse Aggregate Coarse Aggregate will be supplied by a Pre- No additional project sampling
703.04 from Non-Certified Qualified producer/supplier (S1069). Verify required for approved, sampled
703.05 Stock
the producer/supplier is Pre-Qualified using the tonnage except if project believes
703.08
Pre-Qualified Producer/Supplier list maintained there is a problem with the
by OMM (website).60 to 70 lb. QC sample material [either gradation or
taken from each 2600 ton (2360 metric ton)
stockpile, submitted to OMM Aggregate
Section. 100 lb QC sample for sizes 1,2, and
24.
Document in CMS.
Do not use until tested and approved.
quality]
703.02
703.03
703.04
703.05
703.06
703.10
Fine Aggregate from
Certified Stock
Fine Aggregate will be supplied by a supplier
on the Pre-Qualified Supplier List for S 1069
maintained by OMM.
Document in CMS (Trns.port SiteManager ).
30 to 40 lb. QC sample taken by
District lab at source a minimum
four (4) times per year.
No project sampling required
except if project believes there is a
problem with the material [either
gradation or quality]