2010 Construction and Material Specifications - Ohio Department of ...
Share Embed Flag
Download ePaper

2010 Construction and Material Specifications - Ohio Department of ...

2010 Construction and Material Specifications - Ohio Department of ... 2010 Construction and Material Specifications - Ohio Department of ...

dot.state.oh.us
from dot.state.oh.us More from this publisher
05.01.2013 Views

700.00 Spec No. Material Material only Inspection or Sampling Requirements Post Inspection Instructions 658.02 Tree Root Aeration - Assure source on the Certified List for S 1069 Aggregate maintained by OMM Assure aggregate meets soundness requirements. Sample sources with no soundness history and obtain a 100 lb (45 kg) sample 659.03 Seeding and Only accept materials from suppliers licensed Mulching - Liming in Ohio. See OMM website for list of Ohio Materials Department of Agriculture list of licensed suppliers. Document in CMS (Trns.port SiteManager ) 659.04 Seeding and Only accept materials from suppliers licensed Licensing is required. Notify Mulching - in Ohio. See OMM website for list of Ohio District Testing if rejecting Commercial Department of Agriculture list of licensed material. Fertilizer suppliers. If material non-performs or looks Inspect material for certified analysis and defective during use notify District condition. Non-standard application rate require approval prior to use Document in CMS (Trns.port SiteManager ). Testing & OMM. 659.07 Seeding and Verify manufacturer is on certified supplier Verify District approval of seed 659.08 Mulching List maintained by OMM. mixture. 659.09 Seeds Received with TE-24 and description bill of S1022 Legumes lading. Native Grasses and Wildflowers Document in CMS (Trns.port SiteManager ). 659.14 659.15 659.16 Seeding and Mulching - Mulch Material should be reasonably free from foreign matter that would inhibit seed germination. 660.02 Sodding Verify company and brand name of material is on QPL at the time of use. Certification required for each shipment. Document in CMS (Trns.port SiteManager ). 632 Notify District if rejecting material. Notify District Testing if rejecting material. 661 Planting Trees Verify company and brand name of material is Final acceptance should take place Shrubs and Vines on QPL at the time of use. after period of establishment. [Trees] Inspect material for condition. Notify District Testing if rejecting [Shrubs] Plant material should be sealed until use. material. [Vines] Document in CMS (Trns.port SiteManager ). STANDARD MATERIALS SPECIFICATIONS 701.01 701.02 701.04 701.05 701.07 701.09 Cement, Hydraulic ASTM Types I, IA, II, III Masonry Type IS(

633 700.00 Spec No. Material Material only Inspection or Sampling Requirements Post Inspection Instructions 701.13 Fly Ash Verify manufacturer on Concrete Plant Batch Obtain one ½ gallon sample and Ticket is on Certified List for S 1026 original bill-of-lading per concrete maintained by OMM. plant every 180 days for QA. Ship Verify material against bill of lading sample to OMM laboratory. description Ensure that sample container is Document in CMS (Trns.port SiteManager ). filled to capacity prior to transport. If high LOI fly ash verify manufacturer on Concrete Plant Batch Ticket is on List for S 1115. 702.01 Asphalt Binder Certified asphalt PG binder: As directed by Certified binder: Plant: Submit the Lab. Plant: Minimum of one sample per project per sample to Lab. season, except for inconsequential quantities. Non-certified binder: Submit to Lab. Do not allow asphalt Non-Certified PG binder: Will be sampled and production until material is approved by the Department before use. approved. 702.02 Cut Back Asphalt Certified material: Certified material: Submit to Lab. 702.03 Cut Back Asphalt At the refinery or source as directed by the Lab. 702.04 Emulsions Project and/ or Plant: Min. one sample per each Non-certified material: Submit to 702.07 Emulsified Asphalts 25,000 gallons. None for less than 300 gallons. Lab. Do not use until approved by 702.13 Asphalt Emulsion Lab. MWS Non-certified material: Will be sampled and Rubberized Asphalt Emulsion approved by the Department before use. 702.05 Asphalt Primer Each batch sampled and pre-approved per TE Project: Do not accept on project 702.06 Waterproofing Asphalt Waterproofing 24. Lab contacted by supplier for test. without TE 24. 702.14 Rubber Compound Certified test data 702.16 Polymer Emulsified Certified test data Binder 702.17 Crack Sealant Material is pre-tested and approved. Notify District Testing if rejecting Will be shipped with TE-24. material. Document in CMS (Trns.port SiteManager ). If material non-performs or looks defective during use Notify District Testing and OMM Asphalt Section. 703.02 Coarse Aggregate Coarse Aggregate will be supplied by a Pre- 60 to 75 lb. QC sample taken by 703.04 from Certified Stock Qualified producer/supplier (S1069). Verify District lab at source a minimum 703.05 the producer/supplier is Pre-Qualified using the four (4) times per year. 703.08 Pre-Qualified Producer/Supplier list maintained No project sampling required by OMM (website). except if project believes there is a Document in CMS. problem with the material [either gradation or quality] 703.02 Coarse Aggregate Coarse Aggregate will be supplied by a Pre- No additional project sampling 703.04 from Non-Certified Qualified producer/supplier (S1069). Verify required for approved, sampled 703.05 Stock the producer/supplier is Pre-Qualified using the tonnage except if project believes 703.08 Pre-Qualified Producer/Supplier list maintained there is a problem with the by OMM (website).60 to 70 lb. QC sample material [either gradation or taken from each 2600 ton (2360 metric ton) stockpile, submitted to OMM Aggregate Section. 100 lb QC sample for sizes 1,2, and 24. Document in CMS. Do not use until tested and approved. quality] 703.02 703.03 703.04 703.05 703.06 703.10 Fine Aggregate from Certified Stock Fine Aggregate will be supplied by a supplier on the Pre-Qualified Supplier List for S 1069 maintained by OMM. Document in CMS (Trns.port SiteManager ). 30 to 40 lb. QC sample taken by District lab at source a minimum four (4) times per year. No project sampling required except if project believes there is a problem with the material [either gradation or quality]

700.00<br />

Spec No. <strong>Material</strong> <strong>Material</strong> only Inspection or Sampling<br />

Requirements<br />

Post Inspection Instructions<br />

658.02 Tree Root Aeration - Assure source on the Certified List for S 1069<br />

Aggregate maintained by OMM<br />

Assure aggregate meets soundness<br />

requirements. Sample sources with no<br />

soundness history <strong>and</strong> obtain a 100 lb (45 kg)<br />

sample<br />

659.03 Seeding <strong>and</strong> Only accept materials from suppliers licensed<br />

Mulching - Liming in <strong>Ohio</strong>. See OMM website for list <strong>of</strong> <strong>Ohio</strong><br />

<strong>Material</strong>s<br />

<strong>Department</strong> <strong>of</strong> Agriculture list <strong>of</strong> licensed<br />

suppliers.<br />

Document in CMS (Trns.port SiteManager )<br />

659.04 Seeding <strong>and</strong> Only accept materials from suppliers licensed Licensing is required. Notify<br />

Mulching - in <strong>Ohio</strong>. See OMM website for list <strong>of</strong> <strong>Ohio</strong> District Testing if rejecting<br />

Commercial <strong>Department</strong> <strong>of</strong> Agriculture list <strong>of</strong> licensed material.<br />

Fertilizer<br />

suppliers.<br />

If material non-performs or looks<br />

Inspect material for certified analysis <strong>and</strong> defective during use notify District<br />

condition.<br />

Non-st<strong>and</strong>ard application rate require approval<br />

prior to use<br />

Document in CMS (Trns.port SiteManager ).<br />

Testing & OMM.<br />

659.07 Seeding <strong>and</strong> Verify manufacturer is on certified supplier Verify District approval <strong>of</strong> seed<br />

659.08 Mulching<br />

List maintained by OMM.<br />

mixture.<br />

659.09 Seeds<br />

Received with TE-24 <strong>and</strong> description bill <strong>of</strong><br />

S1022 Legumes<br />

lading.<br />

Native Grasses <strong>and</strong><br />

Wildflowers<br />

Document in CMS (Trns.port SiteManager ).<br />

659.14<br />

659.15<br />

659.16<br />

Seeding <strong>and</strong><br />

Mulching - Mulch<br />

<strong>Material</strong> should be reasonably free from<br />

foreign matter that would inhibit seed<br />

germination.<br />

660.02 Sodding Verify company <strong>and</strong> br<strong>and</strong> name <strong>of</strong> material is<br />

on QPL at the time <strong>of</strong> use.<br />

Certification required for each shipment.<br />

Document in CMS (Trns.port SiteManager ).<br />

632<br />

Notify District if rejecting<br />

material.<br />

Notify District Testing if rejecting<br />

material.<br />

661 Planting Trees Verify company <strong>and</strong> br<strong>and</strong> name <strong>of</strong> material is Final acceptance should take place<br />

Shrubs <strong>and</strong> Vines on QPL at the time <strong>of</strong> use.<br />

after period <strong>of</strong> establishment.<br />

[Trees]<br />

Inspect material for condition.<br />

Notify District Testing if rejecting<br />

[Shrubs]<br />

Plant material should be sealed until use. material.<br />

[Vines]<br />

Document in CMS (Trns.port SiteManager ).<br />

STANDARD MATERIALS SPECIFICATIONS<br />

701.01<br />

701.02<br />

701.04<br />

701.05<br />

701.07<br />

701.09<br />

Cement, Hydraulic<br />

ASTM Types I, IA,<br />

II, III<br />

Masonry<br />

Type IS(

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!