2010 Construction and Material Specifications - Ohio Department of ...

295
504.01
provide the minimum cover over culverts to accommodate heavy earth moving
equipment at no expense to the Department.
The Department will pay for accepted quantities at the contract prices as
follows:
Item Unit Description
503 Lump Sum Cofferdams and Excavation Bracing
503 Cubic Yard Unclassified Excavation
(Cubic Meter)
503 Lump Sum Unclassified Excavation
503 Cubic Yard Unclassified Excavation Including Rock
(Cubic Meter)
503 Cubic Yard Unclassified Excavation Including Shale
(Cubic Meter)
503 Cubic Yard Unclassified Excavation
(Cubic Meter) Including Rock and/or Shale
503 Cubic Yard Rock Excavation
(Cubic Meter)
503 Cubic Yard Shale Excavation
(Cubic Meter)
ITEM 504 SHEET PILING LEFT IN PLACE
504.01 Description
504.02 Materials
504.03 Driving
504.04 Method of Measurement
504.05 Basis of Payment
504.01 Description. This work consists of furnishing and driving steel sheet
piling to be left in place, including furnishing and installing any specified anchors
or other attachments to structures.
504.02 Materials. Furnish new sheet piling conforming to 711.03. The
Contractor may use used sheet piling in good condition that conforms to project
requirements provided it is inspected and approved by the Engineer.
504.03 Driving. Drive steel sheet piling to the tip elevation shown on the
plans.
504.04 Method of Measurement. The Department will measure Steel Sheet
Piling Left In Place [Minimum Section Modulus of ____ cubic inches per foot
(____ mm 3 /m)] of Wall by measuring the number of square feet (square meters) in
the plane of the face of the sheeting, completed and accepted in place.
504.05 Basis of Payment. The Department will pay for accepted quantities at
the contract price as follows: