CCNA Cisco Certified Network Associate Study Guide - FTP Server

Command Description Chapter
ip host Creates a host table on a router 7
ip name-server Sets the IP address of up to
six DNS servers
IP route Creates static and default
routes on a router
ipx access-group Applies an IPX access list to
an interface
ipx input-sap-filter Applies an inbound IPX SAP
filter to an interface
ipx network Assigns an IPX network
number to an interface
ipx output-sap-filter Applies an outbound IPX
SAP filter to an interface
ipx ping Is a Packet Internet Groper
used to test IPX packet on an
internetwork
ipx routing Turns on IPX routing 8
isdn spid1 Sets the number that
identifies the first DS0 to the
ISDN switch
isdn spid2 Sets the number that
identifies the second DS0 to
the ISDN switch
isdn switch-type Sets the type of ISDN switch
that the router will communicate
with. Can be set at
interface level or global
configuration mode
K Used at the startup of the
1900 switch and puts the
switch into CLI mode
7
5
9
9
8
9
8
10
10
10
App. B
641